From: Frank Wang <frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org,
groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
jwerner-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
kishon-l0cyMroinI0@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
xzy.xu-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
daniel.meng-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org
Subject: [PATCH v9 0/4] Add a new Rockchip usb2 phy driver
Date: Fri, 22 Jul 2016 15:00:42 +0800 [thread overview]
Message-ID: <1469170846-15617-1-git-send-email-frank.wang@rock-chips.com> (raw)
The newer SoCs (rk3366, rk3399) of Rock-chip take a different usb-phy
IP block than rk3288 and before, and most of phy-related registers are
also different from the past, so a new phy driver is required necessarily.
These series patch add phy-rockchip-inno-usb2.c and the corresponding
dt-bindings.
Changes in v9:
- Move the usb gpio config from dtsi to dts.
- Add vin-supply (vcc5v0_sys) for vcc5v0_host.
- Change some properties' name.
Changes in v8:
- Added support for rk3399 SoC.
- Prepare input clock of phy at probe time.
- Improved sm_work function to handle phy-port state more clearly.
Changes in v7:
- Renamed functions *usb2phy_resume/*usb2phy_suspend to *usb2phy_power_on/usb2phy_power_off.
Changes in v6:
- Changed '_' to '-' for otg-id and otg-bvalid property in devicetree bindings.
- Fixed the output clock would be disabled more than once while phy-port was going to suspend.
- Improved the driver to avoid the currently empty otg-port would cause null-pointer dereferences.
Changes in v5:
- Added 'reg' property both in devicetree bindings and driver to match the different phy-blocks.
Changes in v4:
- Used 'phy-supply' instead of 'vbus_*-supply'.
Changes in v3:
- Supplemented some hardware-description into the devicetree bindings.
- Resolved the mapping defect between fixed value in driver and the property
in devicetree.
- Code cleanup.
Changes in v2:
- Specified more hardware-description into the devicetree bindings.
- Optimized some process of driver.
Frank Wang (4):
Documentation: bindings: add DT documentation for Rockchip USB2PHY
phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
arm64: dts: rockchip: add usb2-phy support for rk3399
arm64: dts: rockchip: configure usb2-phy support for rk3399-evb
.../bindings/phy/phy-rockchip-inno-usb2.txt | 64 ++
arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 44 ++
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 42 +-
drivers/phy/Kconfig | 7 +
drivers/phy/Makefile | 1 +
drivers/phy/phy-rockchip-inno-usb2.c | 707 ++++++++++++++++++++
6 files changed, 864 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2016-07-22 7:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-22 7:00 Frank Wang [this message]
[not found] ` <1469170846-15617-1-git-send-email-frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-07-22 7:00 ` [PATCH v9 1/4] Documentation: bindings: add DT documentation for Rockchip USB2PHY Frank Wang
2016-07-22 7:00 ` [PATCH v9 2/4] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy Frank Wang
[not found] ` <1469170846-15617-3-git-send-email-frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-08-12 10:09 ` Kishon Vijay Abraham I
2016-07-22 7:00 ` [PATCH v9 3/4] arm64: dts: rockchip: add usb2-phy support for rk3399 Frank Wang
[not found] ` <1469170846-15617-4-git-send-email-frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2016-08-03 19:34 ` Heiko Stübner
2016-08-17 9:53 ` Heiko Stübner
2016-07-22 7:00 ` [PATCH v9 4/4] arm64: dts: rockchip: configure usb2-phy support for rk3399-evb Frank Wang
2016-08-17 10:02 ` Heiko Stübner
2016-08-18 2:53 ` Frank Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469170846-15617-1-git-send-email-frank.wang@rock-chips.com \
--to=frank.wang-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=daniel.meng-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=groeck-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jwerner-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=kishon-l0cyMroinI0@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=xzy.xu-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox