From: Chris Zhong <zyw@rock-chips.com>
To: dianders@chromium.org, tfiga@chromium.org, heiko@sntech.de,
yzq@rock-chips.com, groeck@chromium.org,
myungjoo.ham@samsung.com, cw00.choi@samsung.com,
wulf@rock-chips.com, marcheu@chromium.org
Cc: linux-rockchip@lists.infradead.org,
Chris Zhong <zyw@rock-chips.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [v7 PATCH 4/6] arm64: dts: rockchip: add Type-C phy for RK3399
Date: Wed, 27 Jul 2016 21:07:14 +0800 [thread overview]
Message-ID: <1469624836-22792-5-git-send-email-zyw@rock-chips.com> (raw)
In-Reply-To: <1469624836-22792-1-git-send-email-zyw@rock-chips.com>
There are 2 Type-C phy on RK3399, they are almost same, except the
address of register. They support USB3.0 Type-C and DisplayPort1.3
Alt Mode on USB Type-C. Register a phy, supply it to USB3 controller
and DP controller.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
Changes in v1: None
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 44 ++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 0af03a3..7095ddf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -952,6 +952,50 @@
};
};
+ tcphy0: phy@ff7c0000 {
+ compatible = "rockchip,rk3399-typec-phy";
+ reg = <0x0 0xff7c0000 0x0 0x40000>;
+ rockchip,grf = <&grf>;
+ #phy-cells = <0>;
+ clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+ <&cru SCLK_UPHY0_TCPDPHY_REF>;
+ clock-names = "tcpdcore", "tcpdphy-ref";
+ assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cru SRST_UPHY0>,
+ <&cru SRST_UPHY0_PIPE_L00>,
+ <&cru SRST_P_UPHY0_TCPHY>;
+ reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+ rockchip,typec-conn-dir = <0xe580 0 16>;
+ rockchip,usb3tousb2-en = <0xe580 3 19>;
+ rockchip,external-psm = <0xe588 14 30>;
+ rockchip,pipe-status = <0xe5c0 0 0>;
+ rockchip,uphy-dp-sel = <0x6268 19 19>;
+ status = "disabled";
+ };
+
+ tcphy1: phy@ff800000 {
+ compatible = "rockchip,rk3399-typec-phy";
+ reg = <0x0 0xff800000 0x0 0x40000>;
+ rockchip,grf = <&grf>;
+ #phy-cells = <0>;
+ clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+ <&cru SCLK_UPHY1_TCPDPHY_REF>;
+ clock-names = "tcpdcore", "tcpdphy-ref";
+ assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+ assigned-clock-rates = <50000000>;
+ resets = <&cru SRST_UPHY1>,
+ <&cru SRST_UPHY1_PIPE_L00>,
+ <&cru SRST_P_UPHY1_TCPHY>;
+ reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+ rockchip,typec-conn-dir = <0xe58c 0 16>;
+ rockchip,usb3tousb2-en = <0xe58c 3 19>;
+ rockchip,external-psm = <0xe594 14 30>;
+ rockchip,pipe-status = <0xe5c0 16 16>;
+ rockchip,uphy-dp-sel = <0x6268 3 19>;
+ status = "disabled";
+ };
+
watchdog@ff840000 {
compatible = "snps,dw-wdt";
reg = <0x0 0xff840000 0x0 0x100>;
--
2.6.3
next prev parent reply other threads:[~2016-07-27 13:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-27 13:07 [v7 PATCH 0/6] Rockchip Type-C and DisplayPort driver Chris Zhong
2016-07-27 13:07 ` [v7 PATCH 1/6] extcon: Add EXTCON_DISP_DP and the property for USB Type-C Chris Zhong
2016-07-27 21:31 ` Guenter Roeck
2016-07-27 13:07 ` [v7 PATCH 2/6] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY Chris Zhong
2016-07-27 13:07 ` [v7 PATCH 3/6] phy: Add USB Type-C PHY driver for rk3399 Chris Zhong
2016-07-27 21:47 ` Guenter Roeck
2016-07-27 13:07 ` Chris Zhong [this message]
2016-07-27 21:50 ` [v7 PATCH 4/6] arm64: dts: rockchip: add Type-C phy for RK3399 Guenter Roeck
2016-07-27 13:07 ` [v7 PATCH 5/6] Documentation: bindings: add dt documentation for cdn DP controller Chris Zhong
2016-07-27 13:07 ` [v7 PATCH 6/6] drm/rockchip: cdn-dp: add cdn DP support for rk3399 Chris Zhong
2016-07-27 22:24 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469624836-22792-5-git-send-email-zyw@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=catalin.marinas@arm.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=galak@codeaurora.org \
--cc=groeck@chromium.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=marcheu@chromium.org \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tfiga@chromium.org \
--cc=will.deacon@arm.com \
--cc=wulf@rock-chips.com \
--cc=yzq@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox