Re: [PATCH 0/5] Add power domain support for dw_mmc/sdhci-of-arasan

Shawn Lin
2016-08-01T03:10:57Z

在 2016/7/29 17:21, Ulf Hansson 写道:
> On 29 July 2016 at 06:14, Shawn Lin <shawn.lin@rock-chips.com> wrote:
>>
>> We need to enable the power domain manually while probing as the
>> power policy will turn off the pd which is not referenced. Otherwise
>
> I assume you are going to use the generic PM domain (genpd)?

yes.

> If so, this statement isn't entirely correct.
>
> As a matter of fact, the PM domain will be "powered on" once you have
> registered your PM domain with genpd and when the device (dw_mmc etc)
> gets attached to the domain. The attach occurs when the platform bus'
> ->probe() function get invoked for the device.
>
> Genpd monitors each device within the domain. To allow it to "power
> off", all devices in same domain needs to be runtime PM enabled and
> runtime PM suspended.

I will check this with my PM guys as I have limited knowledge about
PM stuff. Thanks for these great info.

So, if my real intention is to just enable genpd to make sure it will
be in "power on " stat, I just need to update my DTS/DTB. That would be
great.:)

>
> Due to this, you should be able to deploy genpd support+an updated
> DTB, without first having to deploying runtime PM support in the
> related drivers. In other words, you should be able to work on these
> things almost independently of each other.

sure.

>
>> we may take risk of breaking kernel once Feng Xiao land the rockchip pd
>> relate stuff. So, let's do it in advance.
>>
>> This pachset is based on the latest linux-next[1] which should contain
>> the next branch of linux-mmc and dt stuff. It's ideal to pack these all
>> into Ulf' tree with Heiko's ack for dts, Rob's ack for Doc and Jaehoon's
>> ack for dw_mmc. But it's okay to be merged seperately.
>>
>> [1] git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
>>
>> Thanks.
>>
>>
>>
>> Shawn Lin (5):
>> Documentation: mmc: synopsys-dw-mshc: add power domain description
>> Documentation: mmc: sdhci-of-arasan: add power domain description
>
> To me this isn't necessary to describe for each device. I think
> Documentation/devicetree/bindings/power/power_domain.txt describes all
> that is needed.
>
>> arm64: dts: rockchip: Provide power-domains for sd/sdio/emmc
>> controllers
>> mmc: dw_mmc: add power domain support
>> mmc: sdhci-of-arasan: add power domain support
>
> I would rephrase these commit message headers, to something like
> "Deploy runtime PM support", as that is actually what you intend to
> do.
>
>>
>> Documentation/devicetree/bindings/mmc/arasan,sdhci.txt | 1 +
>> Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 2 ++
>> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 3 +++
>> drivers/mmc/host/dw_mmc.c | 11 +++++++++++
>> drivers/mmc/host/sdhci-of-arasan.c | 10 ++++++++++
>> 5 files changed, 27 insertions(+)
>>
>> --
>> 2.3.7
>>
>>
>
> Kind regards
> Uffe
>
>
>

--
Best Regards
Shawn Lin

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org