From mboxrd@z Thu Jan 1 00:00:00 1970 From: William Wu Subject: [PATCH v2] usb: host: xhci: plat: check hcc_params after add hcd Date: Tue, 17 Jan 2017 15:32:07 +0800 Message-ID: <1484638327-9686-1-git-send-email-william.wu@rock-chips.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+glpar-linux-rockchip=m.gmane.org-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org To: gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org Cc: huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org, heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org, groeck-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org, frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org, william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org, rogerq-l0cyMroinI0@public.gmane.org List-Id: linux-rockchip.vger.kernel.org From: William wu The commit 4ac53087d6d4 ("usb: xhci: plat: Create both HCDs before adding them") move add hcd to the end of probe, this cause hcc_params uninitiated, because xHCI driver sets hcc_params in xhci_gen_setup() called from usb_add_hcd(). This patch checks the Maximum Primary Stream Array Size in the hcc_params register after add primary hcd. Signed-off-by: William wu --- drivers/usb/host/xhci-plat.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index ddfab30..f96caeb 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -232,9 +232,6 @@ static int xhci_plat_probe(struct platform_device *pdev) if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable")) xhci->quirks |= XHCI_LPM_SUPPORT; - if (HCC_MAX_PSA(xhci->hcc_params) >= 4) - xhci->shared_hcd->can_do_streams = 1; - hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0); if (IS_ERR(hcd->usb_phy)) { ret = PTR_ERR(hcd->usb_phy); @@ -251,6 +248,9 @@ static int xhci_plat_probe(struct platform_device *pdev) if (ret) goto disable_usb_phy; + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) goto dealloc_usb2_hcd; -- 2.7.4