From: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
xxx-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org,
chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org
Subject: [PATCH v5 2/7] mfd: rk808: add rk805 regs addr and ID
Date: Mon, 27 Mar 2017 14:21:40 +0800 [thread overview]
Message-ID: <1490595705-28844-3-git-send-email-zhangqing@rock-chips.com> (raw)
In-Reply-To: <1490595705-28844-1-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Signed-off-by: Elaine Zhang <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
include/linux/mfd/rk808.h | 120 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 54feb140c210..d3156594674c 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -206,6 +206,97 @@ enum rk818_reg {
#define RK818_USB_ILMIN_2000MA 0x7
#define RK818_USB_CHG_SD_VSEL_MASK 0x70
+/* RK805 */
+enum rk805_reg {
+ RK805_ID_DCDC1,
+ RK805_ID_DCDC2,
+ RK805_ID_DCDC3,
+ RK805_ID_DCDC4,
+ RK805_ID_LDO1,
+ RK805_ID_LDO2,
+ RK805_ID_LDO3,
+};
+
+/* CONFIG REGISTER */
+#define RK805_VB_MON_REG 0x21
+#define RK805_THERMAL_REG 0x22
+
+/* POWER CHANNELS ENABLE REGISTER */
+#define RK805_DCDC_EN_REG 0x23
+#define RK805_SLP_DCDC_EN_REG 0x25
+#define RK805_SLP_LDO_EN_REG 0x26
+#define RK805_LDO_EN_REG 0x27
+
+/* BUCK AND LDO CONFIG REGISTER */
+#define RK805_BUCK_LDO_SLP_LP_EN_REG 0x2A
+#define RK805_BUCK1_CONFIG_REG 0x2E
+#define RK805_BUCK1_ON_VSEL_REG 0x2F
+#define RK805_BUCK1_SLP_VSEL_REG 0x30
+#define RK805_BUCK2_CONFIG_REG 0x32
+#define RK805_BUCK2_ON_VSEL_REG 0x33
+#define RK805_BUCK2_SLP_VSEL_REG 0x34
+#define RK805_BUCK3_CONFIG_REG 0x36
+#define RK805_BUCK4_CONFIG_REG 0x37
+#define RK805_BUCK4_ON_VSEL_REG 0x38
+#define RK805_BUCK4_SLP_VSEL_REG 0x39
+#define RK805_LDO1_ON_VSEL_REG 0x3B
+#define RK805_LDO1_SLP_VSEL_REG 0x3C
+#define RK805_LDO2_ON_VSEL_REG 0x3D
+#define RK805_LDO2_SLP_VSEL_REG 0x3E
+#define RK805_LDO3_ON_VSEL_REG 0x3F
+#define RK805_LDO3_SLP_VSEL_REG 0x40
+
+/* INTERRUPT REGISTER */
+#define RK805_PWRON_LP_INT_TIME_REG 0x47
+#define RK805_PWRON_DB_REG 0x48
+#define RK805_DEV_CTRL_REG 0x4B
+#define RK805_INT_STS_REG 0x4C
+#define RK805_INT_STS_MSK_REG 0x4D
+#define RK805_GPIO_IO_POL_REG 0x50
+#define RK805_OUT_REG 0x52
+#define RK805_ON_SOURCE_REG 0xAE
+#define RK805_OFF_SOURCE_REG 0xAF
+
+#define RK805_NUM_REGULATORS 7
+
+#define RK805_PWRON_FALL_RISE_INT_EN 0x0
+#define RK805_PWRON_FALL_RISE_INT_MSK 0x81
+
+/* RK805 IRQ Definitions */
+#define RK805_IRQ_PWRON_RISE 0
+#define RK805_IRQ_VB_LOW 1
+#define RK805_IRQ_PWRON 2
+#define RK805_IRQ_PWRON_LP 3
+#define RK805_IRQ_HOTDIE 4
+#define RK805_IRQ_RTC_ALARM 5
+#define RK805_IRQ_RTC_PERIOD 6
+#define RK805_IRQ_PWRON_FALL 7
+
+#define RK805_IRQ_PWRON_RISE_MSK BIT(0)
+#define RK805_IRQ_VB_LOW_MSK BIT(1)
+#define RK805_IRQ_PWRON_MSK BIT(2)
+#define RK805_IRQ_PWRON_LP_MSK BIT(3)
+#define RK805_IRQ_HOTDIE_MSK BIT(4)
+#define RK805_IRQ_RTC_ALARM_MSK BIT(5)
+#define RK805_IRQ_RTC_PERIOD_MSK BIT(6)
+#define RK805_IRQ_PWRON_FALL_MSK BIT(7)
+
+#define RK805_PWR_RISE_INT_STATUS BIT(0)
+#define RK805_VB_LOW_INT_STATUS BIT(1)
+#define RK805_PWRON_INT_STATUS BIT(2)
+#define RK805_PWRON_LP_INT_STATUS BIT(3)
+#define RK805_HOTDIE_INT_STATUS BIT(4)
+#define RK805_ALARM_INT_STATUS BIT(5)
+#define RK805_PERIOD_INT_STATUS BIT(6)
+#define RK805_PWR_FALL_INT_STATUS BIT(7)
+
+#define RK805_BUCK1_2_ILMAX_MASK (3 << 6)
+#define RK805_BUCK3_4_ILMAX_MASK (3 << 3)
+#define RK805_RTC_PERIOD_INT_MASK (1 << 6)
+#define RK805_RTC_ALARM_INT_MASK (1 << 5)
+#define RK805_INT_ALARM_EN (1 << 3)
+#define RK805_INT_TIMER_EN (1 << 2)
+
/* RK808 IRQ Definitions */
#define RK808_IRQ_VOUT_LO 0
#define RK808_IRQ_VB_LO 1
@@ -298,7 +389,14 @@ enum rk818_reg {
#define VOUT_LO_INT BIT(0)
#define CLK32KOUT2_EN BIT(0)
+#define TEMP115C 0x0c
+#define TEMP_HOTDIE_MSK 0x0c
+#define SLP_SD_MSK (0x3 << 2)
+#define SHUTDOWN_FUN (0x2 << 2)
+#define SLEEP_FUN (0x1 << 2)
#define RK8XX_ID_MSK 0xfff0
+#define FPWM_MODE BIT(7)
+
enum {
BUCK_ILMIN_50MA,
BUCK_ILMIN_100MA,
@@ -322,6 +420,28 @@ enum {
};
enum {
+ RK805_BUCK1_2_ILMAX_2500MA,
+ RK805_BUCK1_2_ILMAX_3000MA,
+ RK805_BUCK1_2_ILMAX_3500MA,
+ RK805_BUCK1_2_ILMAX_4000MA,
+};
+
+enum {
+ RK805_BUCK3_ILMAX_1500MA,
+ RK805_BUCK3_ILMAX_2000MA,
+ RK805_BUCK3_ILMAX_2500MA,
+ RK805_BUCK3_ILMAX_3000MA,
+};
+
+enum {
+ RK805_BUCK4_ILMAX_2000MA,
+ RK805_BUCK4_ILMAX_2500MA,
+ RK805_BUCK4_ILMAX_3000MA,
+ RK805_BUCK4_ILMAX_3500MA,
+};
+
+enum {
+ RK805_ID = 0x8050,
RK808_ID = 0x0000,
RK818_ID = 0x8181,
};
--
1.9.1
next prev parent reply other threads:[~2017-03-27 6:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-27 6:21 [PATCH v5 0/7] rk808: Add RK805 support Elaine Zhang
[not found] ` <1490595705-28844-1-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-03-27 6:21 ` [PATCH v5 1/7] mfd: rk808: fix up the chip id get failed Elaine Zhang
[not found] ` <1490595705-28844-2-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-04-03 11:00 ` Lee Jones
2017-03-27 6:21 ` Elaine Zhang [this message]
[not found] ` <1490595705-28844-3-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-04-03 11:04 ` [PATCH v5 2/7] mfd: rk808: add rk805 regs addr and ID Lee Jones
2017-03-27 6:21 ` [PATCH v5 3/7] regulator: rk808: Add regulator driver for RK805 Elaine Zhang
[not found] ` <1490595705-28844-4-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-03-27 9:40 ` Mark Brown
2017-03-27 6:21 ` [PATCH v5 4/7] mfd: rk808: Add RK805 support Elaine Zhang
2017-04-03 11:05 ` Lee Jones
2017-03-27 6:23 ` [PATCH v5 5/7] clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808 Elaine Zhang
2017-03-27 6:23 ` [PATCH v5 6/7] rtc: Kconfig: Name RK805 in Kconfig for RTC_DRV_RK808 Elaine Zhang
2017-03-27 6:23 ` [PATCH v5 7/7] mfd: dt-bindings: Add RK805 device tree bindings document Elaine Zhang
2017-03-27 6:53 ` [PATCH RESEND " Elaine Zhang
[not found] ` <1490597615-852-1-git-send-email-zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-03-31 18:53 ` Rob Herring
2017-04-03 11:06 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490595705-28844-3-git-send-email-zhangqing@rock-chips.com \
--to=zhangqing-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=w.egorov-guT5V/WYfQezQB+pC5nmwQ@public.gmane.org \
--cc=xxx-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox