Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: William Wu <william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org
Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	mark.rutland-5wv7dgnIgG8@public.gmane.org,
	linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	daniel.meng-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
	william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org
Subject: [PATCH 2/2] ARM: dts: rockchip: enable usb for rk3229 evb board
Date: Wed, 31 May 2017 09:21:24 +0800	[thread overview]
Message-ID: <1496193684-30449-3-git-send-email-william.wu@rock-chips.com> (raw)
In-Reply-To: <1496193684-30449-1-git-send-email-william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Rockchip's rk3229 evaluation board has one usb otg controller
and three usb host controllers. Each usb controller connect
with one usb2 phy port through UTMI+ interface. And the three
usb host interfaces use the same GPIO VBUS drive. Let's enable
them to support usb on rk3229 evb board.

Signed-off-by: William Wu <william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
 arch/arm/boot/dts/rk3229-evb.dts | 74 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 74 insertions(+)

diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts
index 275092a..1b55192 100644
--- a/arch/arm/boot/dts/rk3229-evb.dts
+++ b/arch/arm/boot/dts/rk3229-evb.dts
@@ -58,6 +58,17 @@
 		#clock-cells = <0>;
 	};
 
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vcc_phy: vcc-phy-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -85,6 +96,69 @@
 	status = "okay";
 };
 
+&pinctrl {
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
+
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_otg: otg-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+
+	u2phy1_host: host-port {
+		phy-supply = <&vcc_host>;
+		status = "okay";
+	};
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host2_ehci {
+	status = "okay";
+};
+
+&usb_host2_ohci {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
-- 
2.0.0


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2017-05-31  1:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-31  1:21 [PATCH 0/2] Add usb nodes on rk322x SoCs and enable usb on rk3229 evb William Wu
     [not found] ` <1496193684-30449-1-git-send-email-william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-05-31  1:21   ` [PATCH 1/2] ARM: dts: rockchip: add usb nodes on rk322x William Wu
     [not found]     ` <1496193684-30449-2-git-send-email-william.wu-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-06-01 20:22       ` Heiko Stuebner
2017-06-02  1:44         ` wlf
2017-05-31  1:21   ` William Wu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1496193684-30449-3-git-send-email-william.wu@rock-chips.com \
    --to=william.wu-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
    --cc=daniel.meng-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox