From: Andy Yan <andy.yan@rock-chips.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Andy Yan <andy.yan@rock-chips.com>
Subject: [PATCH v3 12/13] ARM: dts: rockchip: add pmic rk805 dt node for rv1108 evb
Date: Fri, 11 Aug 2017 11:48:43 +0800 [thread overview]
Message-ID: <1502423323-31322-1-git-send-email-andy.yan@rock-chips.com> (raw)
In-Reply-To: <1502422578-30611-1-git-send-email-andy.yan@rock-chips.com>
RK805 is used as the voltage regulator on rv1108 evaluation
board. Add device tree node for it.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---
Changes in v3: None
Changes in v2: None
arch/arm/boot/dts/rv1108-evb.dts | 108 +++++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index 77ce707..a1bd95e 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -94,6 +94,114 @@
248 249 250 251 252 253 254 255>;
default-brightness-level = <200>;
};
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <275>;
+ i2c-scl-falling-time-ns = <16>;
+ clock-frequency = <400000>;
+
+ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+ rockchip,system-power-controller;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+
+ regulators {
+ vdd_core: DCDC_REG1 {
+ regulator-name= "vdd_core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ regulator-state-uv = <900000>;
+ };
+ };
+
+ vdd_cam: DCDC_REG2 {
+ regulator-name= "vdd_cam";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-state-mem {
+ regulator-state-disabled;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name= "vcc_ddr";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-name= "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ regulator-state-uv = <3300000>;
+ };
+ };
+
+ vdd_10: LDO_REG1 {
+ regulator-name= "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-state-disabled;
+ };
+ };
+
+ vcc_18: LDO_REG2 {
+ regulator-name= "vcc_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-state-disabled;
+ };
+ };
+
+ vdd10_pmu: LDO_REG3 {
+ regulator-name= "vdd10_pmu";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-state-enabled;
+ regulator-state-uv = <1000000>;
+ };
+ };
+ };
+ };
};
&pwm0 {
--
2.7.4
next prev parent reply other threads:[~2017-08-11 3:48 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-11 3:36 [PATCH v3 00/13] Support more devices on rockchip rv1108 Andy Yan
2017-08-11 3:48 ` Andy Yan [this message]
[not found] ` <1502422578-30611-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-08-11 3:49 ` [PATCH v3 13/13] ARM: dts: rockchip: add accelerometer bma250e dt node for rv1108 evb Andy Yan
[not found] ` <1502423358-31375-1-git-send-email-andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-08-13 12:16 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502423323-31322-1-git-send-email-andy.yan@rock-chips.com \
--to=andy.yan@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox