[PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Brian Norris]

Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
200 MHz, to support all supported timing modes.

Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
have a compliant Arasan controller, but let's have a rockchip property
as the canonical backup/precautionary measure. Per Heiko's previous
suggestion, let's not clutter the arasan doc with it.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---
v2:

 * improved commit message
 * assign eMMC clock to 200 MHz

 arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 46f325a143b0..9980c2eab4e9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -215,6 +215,19 @@
 		status = "disabled";
 	};
 
+	sdhci: sdhci@fe330000 {
+		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
+		reg = <0x0 0xfe330000 0x0 0x10000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
+		clock-names = "clk_xin", "clk_ahb";
+		assigned-clocks = <&cru SCLK_EMMC>;
+		assigned-clock-rates = <200000000>;
+		phys = <&emmc_phy>;
+		phy-names = "phy_arasan";
+		status = "disabled";
+	};
+
 	usb_host0_ehci: usb@fe380000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xfe380000 0x0 0x20000>;
@@ -481,8 +494,18 @@
 	};
 
 	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
+		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xff770000 0x0 0x10000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		emmc_phy: phy@f780 {
+			compatible = "rockchip,rk3399-emmc-phy";
+			reg = <0xf780 0x20>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
 	};
 
 	watchdog@ff840000 {
-- 
2.8.0.rc3.226.g39d4020

[PATCH v2 2/2] ARM64: dts: rockchip: enable eMMC for rk3399 EVB

[Brian Norris]

Rockchip's rk3399 evaluation board has eMMC. Let's enable the
newly-added node.

Signed-off-by: Brian Norris <briannorris@chromium.org>
---
v2:

 * better commit description

 arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
index 1a3eb1482050..0b27d91084c4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
@@ -89,6 +89,18 @@
 	status = "okay";
 };
 
+&emmc_phy {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	non-removable;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
-- 
2.8.0.rc3.226.g39d4020

Re: [PATCH v2 2/2] ARM64: dts: rockchip: enable eMMC for rk3399 EVB

[Heiko Stuebner]

Am Donnerstag, 12. Mai 2016, 15:35:52 schrieb Brian Norris:
> Rockchip's rk3399 evaluation board has eMMC. Let's enable the
> newly-added node.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
> v2:
> 
>  * better commit description
> 
>  arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index
> 1a3eb1482050..0b27d91084c4 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts
> @@ -89,6 +89,18 @@
>  	status = "okay";
>  };
> 
> +&emmc_phy {
> +	status = "okay";
> +};

another thing I should've seen yesterday, emmc_phy should not be below the 
&pwm nodes (aka alphabetically please)


Heiko

> +&sdhci {
> +	bus-width = <8>;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	non-removable;
> +	status = "okay";
> +};
> +
>  &uart2 {
>  	status = "okay";
>  };

Re: [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Shawn Lin]

在 2016/5/13 6:35, Brian Norris 写道:
> Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
> 200 MHz, to support all supported timing modes.
>
> Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
> have a compliant Arasan controller, but let's have a rockchip property
> as the canonical backup/precautionary measure. Per Heiko's previous
> suggestion, let's not clutter the arasan doc with it.
>
> Signed-off-by: Brian Norris <briannorris@chromium.org>

Except for adding "rockchip,rk3399-sdhci-5.1", it looks nice and keeps
consistent with our local kernel-4.4 tree.

Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>

> ---
> v2:
>
>  * improved commit message
>  * assign eMMC clock to 200 MHz
>
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 46f325a143b0..9980c2eab4e9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -215,6 +215,19 @@
>  		status = "disabled";
>  	};
>
> +	sdhci: sdhci@fe330000 {
> +		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
> +		reg = <0x0 0xfe330000 0x0 0x10000>;
> +		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
> +		clock-names = "clk_xin", "clk_ahb";
> +		assigned-clocks = <&cru SCLK_EMMC>;
> +		assigned-clock-rates = <200000000>;
> +		phys = <&emmc_phy>;
> +		phy-names = "phy_arasan";
> +		status = "disabled";
> +	};
> +
>  	usb_host0_ehci: usb@fe380000 {
>  		compatible = "generic-ehci";
>  		reg = <0x0 0xfe380000 0x0 0x20000>;
> @@ -481,8 +494,18 @@
>  	};
>
>  	grf: syscon@ff770000 {
> -		compatible = "rockchip,rk3399-grf", "syscon";
> +		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
>  		reg = <0x0 0xff770000 0x0 0x10000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		emmc_phy: phy@f780 {
> +			compatible = "rockchip,rk3399-emmc-phy";
> +			reg = <0xf780 0x20>;
> +			#phy-cells = <0>;
> +			status = "disabled";
> +		};
>  	};
>
>  	watchdog@ff840000 {
>


-- 
Best Regards
Shawn Lin


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Doug Anderson]

Hi,

On Thu, May 12, 2016 at 3:35 PM, Brian Norris <briannorris@chromium.org> wrote:
> Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
> 200 MHz, to support all supported timing modes.
>
> Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
> have a compliant Arasan controller, but let's have a rockchip property
> as the canonical backup/precautionary measure. Per Heiko's previous
> suggestion, let's not clutter the arasan doc with it.
>
> Signed-off-by: Brian Norris <briannorris@chromium.org>
> ---
> v2:
>
>  * improved commit message
>  * assign eMMC clock to 200 MHz
>
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> index 46f325a143b0..9980c2eab4e9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -215,6 +215,19 @@
>                 status = "disabled";
>         };
>
> +       sdhci: sdhci@fe330000 {
> +               compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
> +               reg = <0x0 0xfe330000 0x0 0x10000>;
> +               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +               clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
> +               clock-names = "clk_xin", "clk_ahb";
> +               assigned-clocks = <&cru SCLK_EMMC>;
> +               assigned-clock-rates = <200000000>;
> +               phys = <&emmc_phy>;
> +               phy-names = "phy_arasan";
> +               status = "disabled";
> +       };
> +
>         usb_host0_ehci: usb@fe380000 {
>                 compatible = "generic-ehci";
>                 reg = <0x0 0xfe380000 0x0 0x20000>;
> @@ -481,8 +494,18 @@
>         };
>
>         grf: syscon@ff770000 {
> -               compatible = "rockchip,rk3399-grf", "syscon";
> +               compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
>                 reg = <0x0 0xff770000 0x0 0x10000>;
> +
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +
> +               emmc_phy: phy@f780 {
> +                       compatible = "rockchip,rk3399-emmc-phy";
> +                       reg = <0xf780 0x20>;

This is slightly wrong.  It should be:

reg = <0xf780 0x24>;

The status register is at an offset of 0x20 and is 4 bytes big, so we
need room for it.


After that is fixed, feel free to add my Reviewed-by tag.

-Doug

Re: [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Brian Norris]

On Fri, May 13, 2016 at 02:42:06PM -0700, Doug Anderson wrote:
> On Thu, May 12, 2016 at 3:35 PM, Brian Norris <briannorris@chromium.org> wrote:
> > +               emmc_phy: phy@f780 {
> > +                       compatible = "rockchip,rk3399-emmc-phy";
> > +                       reg = <0xf780 0x20>;
> 
> This is slightly wrong.  It should be:
> 
> reg = <0xf780 0x24>;
> 
> The status register is at an offset of 0x20 and is 4 bytes big, so we
> need room for it.

Fixed.

> After that is fixed, feel free to add my Reviewed-by tag.

Done.

Thanks for the review.

Brian

Re: [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Heiko Stuebner]

Am Donnerstag, 12. Mai 2016, 15:35:51 schrieb Brian Norris:
> Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
> 200 MHz, to support all supported timing modes.
> 
> Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
> have a compliant Arasan controller, but let's have a rockchip property
> as the canonical backup/precautionary measure. Per Heiko's previous
> suggestion, let's not clutter the arasan doc with it.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>

At least one split is necessary.
So please at least split out the simple-mfd addition into a separate patch
(I should've seen that in v1 already, but sadly didn't)

I'm undecided if the emmc-phy addition also should get its own patch, but I 
guess it can stay together with the emmc controller.

> ---
> v2:
> 
>  * improved commit message
>  * assign eMMC clock to 200 MHz
> 
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index
> 46f325a143b0..9980c2eab4e9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -215,6 +215,19 @@
>  		status = "disabled";
>  	};
> 
> +	sdhci: sdhci@fe330000 {
> +		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
> +		reg = <0x0 0xfe330000 0x0 0x10000>;
> +		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
> +		clock-names = "clk_xin", "clk_ahb";
> +		assigned-clocks = <&cru SCLK_EMMC>;
> +		assigned-clock-rates = <200000000>;
> +		phys = <&emmc_phy>;
> +		phy-names = "phy_arasan";
> +		status = "disabled";
> +	};
> +
>  	usb_host0_ehci: usb@fe380000 {
>  		compatible = "generic-ehci";
>  		reg = <0x0 0xfe380000 0x0 0x20000>;
> @@ -481,8 +494,18 @@
>  	};
> 
>  	grf: syscon@ff770000 {
> -		compatible = "rockchip,rk3399-grf", "syscon";
> +		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
>  		reg = <0x0 0xff770000 0x0 0x10000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		emmc_phy: phy@f780 {
> +			compatible = "rockchip,rk3399-emmc-phy";
> +			reg = <0xf780 0x20>;
> +			#phy-cells = <0>;
> +			status = "disabled";
> +		};
>  	};
> 
>  	watchdog@ff840000 {

Re: [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Brian Norris]

On Fri, May 13, 2016 at 11:47:57PM +0200, Heiko Stuebner wrote:
> Am Donnerstag, 12. Mai 2016, 15:35:51 schrieb Brian Norris:
> > Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
> > 200 MHz, to support all supported timing modes.
> > 
> > Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
> > have a compliant Arasan controller, but let's have a rockchip property
> > as the canonical backup/precautionary measure. Per Heiko's previous
> > suggestion, let's not clutter the arasan doc with it.
> > 
> > Signed-off-by: Brian Norris <briannorris@chromium.org>
> 
> At least one split is necessary.
> So please at least split out the simple-mfd addition into a separate patch

Will do.

BTW, should this be noted in
Documentation/devicetree/bindings/soc/rockchip/grf.txt now?

> (I should've seen that in v1 already, but sadly didn't)

No problem.

> I'm undecided if the emmc-phy addition also should get its own patch, but I 
> guess it can stay together with the emmc controller.

I think it makes sense for them to stay together. What's a phy without a
controller to use it? :)

Brian

Re: [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399

[Heiko Stuebner]

Am Freitag, 13. Mai 2016, 14:57:24 schrieb Brian Norris:
> On Fri, May 13, 2016 at 11:47:57PM +0200, Heiko Stuebner wrote:
> > Am Donnerstag, 12. Mai 2016, 15:35:51 schrieb Brian Norris:
> > > Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it
> > > to
> > > 200 MHz, to support all supported timing modes.
> > > 
> > > Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
> > > have a compliant Arasan controller, but let's have a rockchip property
> > > as the canonical backup/precautionary measure. Per Heiko's previous
> > > suggestion, let's not clutter the arasan doc with it.
> > > 
> > > Signed-off-by: Brian Norris <briannorris@chromium.org>
> > 
> > At least one split is necessary.
> > So please at least split out the simple-mfd addition into a separate
> > patch
> Will do.
> 
> BTW, should this be noted in
> Documentation/devicetree/bindings/soc/rockchip/grf.txt now?

The simple-mfd is already documented in mfd/mfd.txt in a general way, so I 
don't think every instance needs to have that, especially as it mainly 
affects sub-nodes alone.