From: Shawn Lin <shawn.lin@rock-chips.com>
To: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
FUKAUMI Naoki <naoki@radxa.com>,
Marco Schirrmeister <mschirrmeister@gmail.com>,
John Clark <inindev@gmail.com>, Tianling Shen <cnsztl@gmail.com>,
Detlev Casanova <detlev.casanova@collabora.com>,
Shawn Lin <shawn.lin@rock-chips.com>
Subject: [PATCH v2 2/3] soc: rockchip: grf: Support multiple grf to be handled
Date: Tue, 13 Jan 2026 09:18:24 +0800 [thread overview]
Message-ID: <1768267105-127385-3-git-send-email-shawn.lin@rock-chips.com> (raw)
In-Reply-To: <1768267105-127385-1-git-send-email-shawn.lin@rock-chips.com>
Currently, only the first matched node will be handled. This leads
to jtag switching broken for RK3576, as rk3576-sys-grf is found before
rk3576-ioc-grf. Change the code to scan all the possible nodes to fix
the problem.
Fixes: e1aaecacfa13 ("soc: rockchip: grf: Add rk3576 default GRF values")
Cc: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---
Changes in v2:
- use for_each_matching_node_and_match(Heiko)
drivers/soc/rockchip/grf.c | 54 +++++++++++++++++++++++-----------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/drivers/soc/rockchip/grf.c b/drivers/soc/rockchip/grf.c
index 8974d1c..9b36390 100644
--- a/drivers/soc/rockchip/grf.c
+++ b/drivers/soc/rockchip/grf.c
@@ -217,34 +217,34 @@ static int __init rockchip_grf_init(void)
struct regmap *grf;
int ret, i;
- np = of_find_matching_node_and_match(NULL, rockchip_grf_dt_match,
- &match);
- if (!np)
- return -ENODEV;
- if (!match || !match->data) {
- pr_err("%s: missing grf data\n", __func__);
+ for_each_matching_node_and_match(np, rockchip_grf_dt_match, &match) {
+ if (!of_device_is_available(np))
+ continue;
+ if (!match || !match->data) {
+ pr_err("%s: missing grf data\n", __func__);
+ of_node_put(np);
+ return -EINVAL;
+ }
+
+ grf_info = match->data;
+
+ grf = syscon_node_to_regmap(np);
of_node_put(np);
- return -EINVAL;
- }
-
- grf_info = match->data;
-
- grf = syscon_node_to_regmap(np);
- of_node_put(np);
- if (IS_ERR(grf)) {
- pr_err("%s: could not get grf syscon\n", __func__);
- return PTR_ERR(grf);
- }
-
- for (i = 0; i < grf_info->num_values; i++) {
- const struct rockchip_grf_value *val = &grf_info->values[i];
-
- pr_debug("%s: adjusting %s in %#6x to %#10x\n", __func__,
- val->desc, val->reg, val->val);
- ret = regmap_write(grf, val->reg, val->val);
- if (ret < 0)
- pr_err("%s: write to %#6x failed with %d\n",
- __func__, val->reg, ret);
+ if (IS_ERR(grf)) {
+ pr_err("%s: could not get grf syscon\n", __func__);
+ return PTR_ERR(grf);
+ }
+
+ for (i = 0; i < grf_info->num_values; i++) {
+ const struct rockchip_grf_value *val = &grf_info->values[i];
+
+ pr_debug("%s: adjusting %s in %#6x to %#10x\n", __func__,
+ val->desc, val->reg, val->val);
+ ret = regmap_write(grf, val->reg, val->val);
+ if (ret < 0)
+ pr_err("%s: write to %#6x failed with %d\n",
+ __func__, val->reg, ret);
+ }
}
return 0;
--
2.7.4
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-01-13 1:19 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-13 1:18 [PATCH v2 0/3] Fix sd card support for RK3576 Shawn Lin
2026-01-13 1:18 ` [PATCH v2 1/3] soc: rockchip: grf: Fix wrong RK3576_IOCGRF_MISC_CON definition Shawn Lin
2026-01-13 1:18 ` Shawn Lin [this message]
2026-01-13 17:43 ` [PATCH v2 2/3] soc: rockchip: grf: Support multiple grf to be handled Heiko Stübner
2026-01-14 1:34 ` Shawn Lin
2026-01-13 1:18 ` [PATCH v2 3/3] arm64: dts: rockchip: Add cd-gpios for sdmmc of RK3576 EVB1 Shawn Lin
2026-01-13 20:35 ` [PATCH v2 0/3] Fix sd card support for RK3576 Marco Schirrmeister
2026-01-14 2:01 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1768267105-127385-3-git-send-email-shawn.lin@rock-chips.com \
--to=shawn.lin@rock-chips.com \
--cc=cnsztl@gmail.com \
--cc=detlev.casanova@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=inindev@gmail.com \
--cc=linux-rockchip@lists.infradead.org \
--cc=mschirrmeister@gmail.com \
--cc=naoki@radxa.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox