Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	joachim.eastwood@gmail.com
Cc: Shawn Lin <Shawn.lin@rock-chips.com>,
	Diederik de Haas <diederik@cknow-tech.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	Joachim Eastwood <joachim.eastwood@gmail.com>
Subject: Re: [PATCH v2 0/9] arm64: dts: rockchip: NanoPi 6 series fixes and improvements
Date: Sun, 01 Nov 2026 23:19:46 +0100	[thread overview]
Message-ID: <17766357.Ash8RoxBsO@diego> (raw)
In-Reply-To: <20261101-nanopi-m6-improvements-v2-0-a24769efda23@gmail.com>

Hi Joachim

Am Sonntag, 1. November 2026, 22:55:18 Mitteleuropäische Normalzeit schrieb Joachim Eastwood via B4 Relay:
> This patch series contains a few fixes and miscellaneous improvements
> for the NanoPi 6 series of boards.
> 
> Patch 1 fixes the voltage range on the SDMMC regulator.
> Patch 2 enables HS400 mode on eMMC. Tested on my M6 board.
> Patch 3 adds an IIO HWMON device to monitor the input voltage.
> Patch 4 moves a regulator that only exist R6 boards to the correct dtsi.
> Patch 5-9 renames DT names to match the schematics signals/nets.
> 
> If patch 5-9 is just considered churn I'll drop them. These are more
> nice to have and just makes it easier to cross-reference DT and
> schematics.
> 
> Schematics for the boards can be found here:
> M6: https://wiki.friendlyelec.com/wiki/images/8/85/NanoPi_M6_2405_SCH.PDF
> R6C: https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF
> R6S: https://wiki.friendlyelec.com/wiki/images/2/2f/NanoPi_R6S_2208_SCH.PDF
> 
> Signed-off-by: Joachim Eastwood <joachim.eastwood@gmail.com>
> ---
> Changes in v2:
> - Add schematic links to cover letter to ease review
> - Renamed rtl8211f node to gmac
> - Add R-b tags from Shawn Lin
> - Rebased on v7.4-rc1
> - Link to v1: https://patch.msgid.link/20261014-nanopi-m6-improvements-v1-0-e713f71eb4d3@gmail.com

looks like we worked at the same time :-) .

As you will have seen just now, I applied your v1, so please send any
needed changes as follow up patches.


Thanks
Heiko



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2026-11-01 22:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-01 21:55 [PATCH v2 0/9] arm64: dts: rockchip: NanoPi 6 series fixes and improvements Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 1/9] arm64: dts: rockchip: rk3588s-nanopi: fix sd min/max voltage Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 2/9] arm64: dts: rockchip: rk3588s-nanopi: enable mmc-hs400 and add supplies Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 3/9] arm64: dts: rockchip: rk3588s-nanopi: add voltage iio-hwmon device Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 4/9] arm64: dts: rockchip: rk3588s-nanopi: move vcc_3v3_s0 to nanopi-r6 Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 5/9] arm64: dts: rockchip: rk3588s-nanopi: rename sd power pin Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 6/9] arm64: dts: rockchip: rk3588s-nanopi: rename usb host " Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 7/9] arm64: dts: rockchip: rk3588s-nanopi: rename gmac1 reset pin Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 8/9] arm64: dts: rockchip: rk3588s-nanopi-m6: rename pcie2 power pin Joachim Eastwood via B4 Relay
2026-11-01 21:55 ` [PATCH v2 9/9] arm64: dts: rockchip: rk3588s-nanopi-m6: rename pcie2 power rail Joachim Eastwood via B4 Relay
2026-11-01 22:19 ` Heiko Stübner [this message]
2026-11-02 22:02   ` [PATCH v2 0/9] arm64: dts: rockchip: NanoPi 6 series fixes and improvements Joachim Eastwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17766357.Ash8RoxBsO@diego \
    --to=heiko@sntech.de \
    --cc=Shawn.lin@rock-chips.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=diederik@cknow-tech.com \
    --cc=joachim.eastwood@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox