From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: Re: [PATCH 1/3] ARM: dts: rockchip: add sram to bus_intmem nodename for rv1108 Date: Sun, 01 Mar 2020 00:49:34 +0100 Message-ID: <2000313.0TYPBYeV91@phil> References: <20200228155354.27206-1-jbx6244@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <20200228155354.27206-1-jbx6244-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Johan Jonker Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rockchip.vger.kernel.org Am Freitag, 28. Februar 2020, 16:53:52 CET schrieb Johan Jonker: > A test with the command below gives these errors: > > arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: > bus_intmem@10080000: $nodename:0: 'bus_intmem@10080000' > does not match '^sram(@.*)?' > arch/arm/boot/dts/rv1108-evb.dt.yaml: > bus_intmem@10080000: $nodename:0: 'bus_intmem@10080000' > does not match '^sram(@.*)?' > > Fix this error by adding sram to the bus_intmem nodename > in rv1108.dtsi. > > make ARCH=arm dtbs_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/sram/sram.yaml > > Signed-off-by: Johan Jonker applied all 3 patches for 5.7 Thanks Heiko