Re: [RESEND PATCH v7 0/4] the fix for the USB HOST1 at rk3288 platform

ayaka
2016-09-13T11:26:03Z

On 09/13/2016 07:06 PM, Heiko Stuebner wrote:
> Hi Randy,
>
> could you check if the other host-only dwc2 are also affected by this (rk3188,
> rk3036) please? Because they also seem to act up in some strange way
But I don't have those board currently. I would arrange them anyway.
Btw, I would send a new version to correct the fault reported by the
auto build machine.
> sometimes.
>
> Thanks
> Heiko
>
> Am Samstag, 10. September 2016, 02:59:36 CEST schrieb Randy Li:
>> At this stage it is the only "full features" and well verified
>> USB EHCI controller in this platform. More review is always necessary.
>>
>> Changelog:
>> - v7:
>> adding a wrapper for the reset operation for phy
>> using that wrapper
>> - v6:
>> move pwms pinctrl to pwms node
>> fix the order of the dtb file in Makefile
>> - v5:
>> - correct the mail format
>> - v4:
>> - re-order some nodes in alphabetical order
>> - fix some minor bugs
>> - add a entry in vendor list
>> - v3:
>> - fixing the rtc clock, using clock source from PMIC
>> - enable the tmu
>> - enable the fimc for elite board
>> - suuport the audio codec at elite board
>> - fixing minor bugs in the last commit
>> - v2:
>> - removing rtc node
>> the clock source driver is not done yet.
>> - adding exynos-bus
>> - fixing the MFC
>>
>> Randy Li (4):
>> phy: Add reset callback
>> phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during
>> wakeup
>> usb: dwc2: assert phy reset when waking up in rk3288 platform
>> ARM: dts: rockchip: Point rk3288 dwc2 usb at the full PHY reset
>>
>> .../devicetree/bindings/phy/rockchip-usb-phy.txt | 3 +++
>> arch/arm/boot/dts/rk3288.dtsi | 4 ++++
>> drivers/phy/phy-core.c | 14 ++++++++++++++
>> drivers/phy/phy-rockchip-usb.c | 20
>> ++++++++++++++++++++ drivers/usb/dwc2/core_intr.c |
>> 11 +++++++++++ include/linux/phy/phy.h | 3
>> +++
>> 6 files changed, 55 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in