From: Marc Zyngier <marc.zyngier@arm.com>
To: linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>, Heiko Stuebner <heiko@sntech.de>,
Jeffy Chen <jeffy.chen@rock-chips.com>,
arm@kernel.org
Subject: [PATCH v2 3/4] iommu/rockchip: Handle errors returned from PM framework
Date: Fri, 24 Aug 2018 16:06:36 +0100 [thread overview]
Message-ID: <20180824150637.15316-4-marc.zyngier@arm.com> (raw)
In-Reply-To: <20180824150637.15316-1-marc.zyngier@arm.com>
pm_runtime_get_if_in_use can fail: either PM has been disabled
altogether (-EINVAL), or the device hasn't been enabled yet (0).
Sadly, the Rockchip IOMMU driver tends to conflate the two things
by considering a non-zero return value as successful.
This has the consequence of hiding other bugs, so let's handle this
case throughout the driver, with a WARN_ON_ONCE so that we can try
and work out what happened.
Fixes: 0f181d3cf7d98 ("iommu/rockchip: Add runtime PM support")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
drivers/iommu/rockchip-iommu.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 054cd2c8e9c8..4e0f9b61cd7f 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -521,10 +521,11 @@ static irqreturn_t rk_iommu_irq(int irq, void *dev_id)
u32 int_status;
dma_addr_t iova;
irqreturn_t ret = IRQ_NONE;
- int i;
+ int i, err;
- if (WARN_ON(!pm_runtime_get_if_in_use(iommu->dev)))
- return 0;
+ err = pm_runtime_get_if_in_use(iommu->dev);
+ if (WARN_ON_ONCE(err <= 0))
+ return ret;
if (WARN_ON(clk_bulk_enable(iommu->num_clocks, iommu->clocks)))
goto out;
@@ -620,11 +621,15 @@ static void rk_iommu_zap_iova(struct rk_iommu_domain *rk_domain,
spin_lock_irqsave(&rk_domain->iommus_lock, flags);
list_for_each(pos, &rk_domain->iommus) {
struct rk_iommu *iommu;
+ int ret;
iommu = list_entry(pos, struct rk_iommu, node);
/* Only zap TLBs of IOMMUs that are powered on. */
- if (pm_runtime_get_if_in_use(iommu->dev)) {
+ ret = pm_runtime_get_if_in_use(iommu->dev);
+ if (WARN_ON_ONCE(ret < 0))
+ continue;
+ if (ret) {
WARN_ON(clk_bulk_enable(iommu->num_clocks,
iommu->clocks));
rk_iommu_zap_lines(iommu, iova, size);
@@ -891,6 +896,7 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
struct rk_iommu *iommu;
struct rk_iommu_domain *rk_domain = to_rk_domain(domain);
unsigned long flags;
+ int ret;
/* Allow 'virtual devices' (eg drm) to detach from domain */
iommu = rk_iommu_from_dev(dev);
@@ -909,7 +915,9 @@ static void rk_iommu_detach_device(struct iommu_domain *domain,
list_del_init(&iommu->node);
spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
- if (pm_runtime_get_if_in_use(iommu->dev)) {
+ ret = pm_runtime_get_if_in_use(iommu->dev);
+ WARN_ON_ONCE(ret < 0);
+ if (ret > 0) {
rk_iommu_disable(iommu);
pm_runtime_put(iommu->dev);
}
@@ -946,7 +954,8 @@ static int rk_iommu_attach_device(struct iommu_domain *domain,
list_add_tail(&iommu->node, &rk_domain->iommus);
spin_unlock_irqrestore(&rk_domain->iommus_lock, flags);
- if (!pm_runtime_get_if_in_use(iommu->dev))
+ ret = pm_runtime_get_if_in_use(iommu->dev);
+ if (!ret || WARN_ON_ONCE(ret < 0))
return 0;
ret = rk_iommu_enable(iommu);
--
2.18.0
next prev parent reply other threads:[~2018-08-24 15:06 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-24 15:06 [PATCH v2 0/4] iommu/rockchip: Runtime PM fixes Marc Zyngier
2018-08-24 15:06 ` [PATCH v2 1/4] ARM: rockchip: Force CONFIG_PM on Rockchip systems Marc Zyngier
2018-08-24 15:06 ` [PATCH v2 2/4] arm64: " Marc Zyngier
2018-08-24 15:06 ` Marc Zyngier [this message]
2018-08-24 15:06 ` [PATCH v2 4/4] iommu/rockchip: Move irq request past pm_runtime_enable Marc Zyngier
2018-08-24 15:50 ` [PATCH v2 0/4] iommu/rockchip: Runtime PM fixes Olof Johansson
2018-08-24 18:08 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180824150637.15316-4-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=arm@kernel.org \
--cc=heiko@sntech.de \
--cc=iommu@lists.linux-foundation.org \
--cc=jeffy.chen@rock-chips.com \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox