From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Stuebner Subject: [PATCH v3 1/4] arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328 Date: Mon, 10 Sep 2018 11:28:40 +0200 Message-ID: <20180910092843.1700-2-heiko@sntech.de> References: <20180910092843.1700-1-heiko@sntech.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180910092843.1700-1-heiko@sntech.de> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: linux-rockchip@lists.infradead.org Cc: Heiko Stuebner , robin.murphy@arm.com, hjc@rock-chips.com, linux-arm-kernel@lists.infradead.org, zhengyang@rock-chips.com List-Id: linux-rockchip.vger.kernel.org The rk3328 uses a hdmiphy from Innosilicon, so add the necessary node to the rk3328 soc devicetree. Signed-off-by: Heiko Stuebner Tested-by: Robin Murphy --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 2e3bd93c508c..beebab74ce17 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -616,6 +616,20 @@ status = "disabled"; }; + hdmiphy: phy@ff430000 { + compatible = "rockchip,rk3328-hdmi-phy"; + reg = <0x0 0xff430000 0x0 0x10000>; + interrupts = ; + clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>; + clock-names = "sysclk", "refoclk", "refpclk"; + clock-output-names = "hdmi_phy"; + #clock-cells = <0>; + nvmem-cells = <&efuse_cpu_version>; + nvmem-cell-names = "cpu-version"; + #phy-cells = <0>; + status = "disabled"; + }; + cru: clock-controller@ff440000 { compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon"; reg = <0x0 0xff440000 0x0 0x1000>; -- 2.17.0