From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: hjc@rock-chips.com, airlied@linux.ie, robh+dt@kernel.org,
mark.rutland@arm.com, mturquette@baylibre.com, sboyd@kernel.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org
Subject: [PATCH v2 0/7] Enable rk3066 VOP and HDMI for MK808
Date: Sat, 29 Dec 2018 14:33:11 +0100 [thread overview]
Message-ID: <20181229133318.18128-1-jbx6244@gmail.com> (raw)
DISCLAIMER: Use at your own risk.
For testing only!
Version: V2
Title: Enable rk3066 VOP and HDMI for MK808.
This patch serie only works in combination with a MK808 TV stick and
a rk3066 processor. Other boxes and tablets with a rk3066
need extra software for power management and lcd's.
What does it do:
With these 7 kernel patches a MK808 can show 2 penquins and a console
on a DVI-D monitor in combination with a framebuffer.
Not tested:
HDMI TV
DRM
Xorg
Display managers
Android
etc.
Problems:
Fixed screen size for DVI-D.
HDMI sound not included.
etc.
///////////////////////////////////////////
# How to make rkfs.cpio
find . | cpio -o --format=newc > ../rkfs.cpio
# How to compile/flash
make menuconfig ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi-
make -j4 ARCH=arm CROSS_COMPILE=/usr/bin/arm-linux-gnueabi-
cp ./arch/arm/boot/zImage ../zImage-dtb
cat ./arch/arm/boot/dts/rk3066a-mk808.dtb >> ../zImage-dtb
../tools/rkcrc -k ../zImage-dtb ../mk808.img
sudo ../tools/rkflashtool w 0x4000 0x8000 < ../mk808.img
sudo ../tools/rkflashtool b
///////////////////////////////////////////
Finley Xiao (1):
clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk
Johan Jonker (2):
ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node
ARM: dts: rockchip: rk3066a-mk808: enable vop0 and hdmi nodes
Mark Yao (2):
drm: rockchip: vop: add rk3066 vop definitions
ARM: dts: rockchip: add rk3066 vop display nodes
Zheng Yang (2):
drm: rockchip: introduce rk3066 hdmi
ARM: dts: rockchip: add rk3066 hdmi nodes
.../bindings/display/rockchip/rockchip-vop.txt | 1 +
arch/arm/boot/dts/rk3066a-mk808.dts | 12 +
arch/arm/boot/dts/rk3066a.dtsi | 92 ++
drivers/clk/rockchip/clk-rk3188.c | 4 +-
drivers/gpu/drm/rockchip/Kconfig | 8 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/rk3066_hdmi.c | 928 +++++++++++++++++++++
drivers/gpu/drm/rockchip/rk3066_hdmi.h | 235 ++++++
drivers/gpu/drm/rockchip/rockchip_drm_drv.c | 2 +
drivers/gpu/drm/rockchip/rockchip_drm_drv.h | 1 +
drivers/gpu/drm/rockchip/rockchip_vop_reg.c | 110 +++
drivers/gpu/drm/rockchip/rockchip_vop_reg.h | 53 ++
12 files changed, 1445 insertions(+), 2 deletions(-)
create mode 100644 drivers/gpu/drm/rockchip/rk3066_hdmi.c
create mode 100644 drivers/gpu/drm/rockchip/rk3066_hdmi.h
--
2.11.0
next reply other threads:[~2018-12-29 13:33 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-29 13:33 Johan Jonker [this message]
2018-12-29 13:33 ` [PATCH v2 1/7] ARM: dts: rockchip: rk3066: add HCLK_HDMI to pmu node Johan Jonker
2018-12-30 14:03 ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 2/7] clk: rockchip: rk3188: add CLK_SET_RATE_PARENT for lcdc dclk Johan Jonker
2018-12-30 17:05 ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 3/7] drm: rockchip: vop: add rk3066 vop definitions Johan Jonker
2018-12-30 17:22 ` Heiko Stuebner
2019-01-11 14:54 ` Rob Herring
2019-01-12 18:53 ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 4/7] drm: rockchip: introduce rk3066 hdmi Johan Jonker
2019-02-01 14:25 ` Johan Jonker
2018-12-29 13:33 ` [PATCH v2 5/7] ARM: dts: rockchip: add rk3066 vop display nodes Johan Jonker
2019-01-12 19:24 ` Heiko Stuebner
2018-12-29 13:33 ` [PATCH v2 6/7] ARM: dts: rockchip: add rk3066 hdmi nodes Johan Jonker
2018-12-29 13:33 ` [PATCH v2 7/7] ARM: dts: rockchip: rk3066a-mk808: enable vop0 and " Johan Jonker
2019-02-01 12:32 ` [PATCH] dt-bindings: display: rockchip: add document for rk3066 hdmi Johan Jonker
2019-02-25 16:59 ` Rob Herring
2019-02-27 18:04 ` Johan Jonker
2019-02-27 19:06 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181229133318.18128-1-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).