From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Akash Gajjar <akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org>
Cc: Paul Kocialkowski
<paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org
Subject: [PATCH v3 04/13] Kconfig: Add default SPL_FIT_GENERATOR for rockchip
Date: Thu, 25 Apr 2019 23:04:18 +0530 [thread overview]
Message-ID: <20190425173427.13445-5-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190425173427.13445-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Add default SPL_FIT_GENERATOR py script for rockchip platforms if
specific target enabled SPL_LOAD_FIT.
So, this would help get rid of explicitly mentioning the default
SPL FIT generator in defconfigs. however some targets, like puma_rk3399
still require their own FIT generator so in those cases the default will
override with defconfig defined generator.
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
---
Kconfig | 1 +
configs/chromebook_bob_defconfig | 1 -
configs/evb-rk3399_defconfig | 1 -
configs/ficus-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
configs/rock960-rk3399_defconfig | 1 -
6 files changed, 1 insertion(+), 5 deletions(-)
diff --git a/Kconfig b/Kconfig
index 305b265ed7..5679a288ec 100644
--- a/Kconfig
+++ b/Kconfig
@@ -424,6 +424,7 @@ config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
+ default "arch/arm/mach-rockchip/make_fit_atf.py" if SPL_LOAD_FIT && ARCH_ROCKCHIP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig
index ce3deccb8a..04e25e1d4f 100644
--- a/configs/chromebook_bob_defconfig
+++ b/configs/chromebook_bob_defconfig
@@ -19,7 +19,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index d98535357a..49b2e2e089 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/ficus-rk3399_defconfig b/configs/ficus-rk3399_defconfig
index 94c565efc2..fe3b9964e8 100644
--- a/configs/ficus-rk3399_defconfig
+++ b/configs/ficus-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 6725b48970..914304bb43 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/rock960-rk3399_defconfig b/configs/rock960-rk3399_defconfig
index cb5a35f4f5..5e6778ea20 100644
--- a/configs/rock960-rk3399_defconfig
+++ b/configs/rock960-rk3399_defconfig
@@ -13,7 +13,6 @@ CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.py"
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-04-25 17:34 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-25 17:34 [PATCH v3 00/13] rockchip: Add new rk3399 boards Jagan Teki
[not found] ` <20190425173427.13445-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-25 17:34 ` [PATCH v3 01/13] rockchip: dts: rk3399: Sync rk3399-opp from Linux Jagan Teki
2019-04-25 17:34 ` [PATCH v3 02/13] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2 Jagan Teki
2019-04-25 17:34 ` [PATCH v3 03/13] rockchip: dts: rk3399: Create initial rk3399-u-boot.dtsi Jagan Teki
[not found] ` <20190425173427.13445-4-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-04-26 13:21 ` Jagan Teki
2019-04-26 13:33 ` Paul Kocialkowski
2019-04-25 17:34 ` Jagan Teki [this message]
2019-04-25 17:34 ` [PATCH v3 05/13] arm: rockchip: rk3399: Move common configs in Kconfig Jagan Teki
2019-04-25 17:34 ` [PATCH v3 06/13] rockchip: rk3399: Add Orangepi RK3399 support Jagan Teki
2019-04-26 14:17 ` Paul Kocialkowski
[not found] ` <51dab1c2fea1ca16b892c9face5fd4c6b451d07d.camel-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
2019-04-26 14:27 ` Jagan Teki
2019-04-26 14:34 ` Paul Kocialkowski
[not found] ` <f89a6bbc7390db5f9ed6f7ad732b6451cdea15c4.camel-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
2019-04-26 14:45 ` Jagan Teki
2019-04-26 14:54 ` Paul Kocialkowski
[not found] ` <5953e5f8b8d45cdc5c208c75b16e831391f3db08.camel-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
2019-04-26 15:01 ` Jagan Teki
2019-04-26 15:12 ` Paul Kocialkowski
2019-04-26 15:18 ` Jagan Teki
2019-04-26 15:38 ` Paul Kocialkowski
2019-04-26 15:48 ` Jagan Teki
2019-04-26 16:08 ` Paul Kocialkowski
2019-04-26 16:09 ` Philipp Tomsich
[not found] ` <d5d26a75416da7249f21517e080cff2309393dfe.camel-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
2019-04-26 16:16 ` Jagan Teki
2019-04-26 16:40 ` Paul Kocialkowski
2019-04-26 16:53 ` Jagan Teki
2019-04-26 17:08 ` Paul Kocialkowski
2019-04-26 17:21 ` Jagan Teki
2019-04-26 17:37 ` Paul Kocialkowski
[not found] ` <e1fad022ad1407df514ab8fd4d44485cf3e4f82a.camel-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
2019-04-26 17:42 ` Jagan Teki
2019-04-26 18:02 ` Paul Kocialkowski
2019-04-25 17:34 ` [PATCH v3 07/13] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux Jagan Teki
2019-04-25 17:34 ` [PATCH v3 08/13] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1 Jagan Teki
2019-04-25 17:34 ` [PATCH v3 09/13] rockchip: rk3399: Add Nanopi M4 board support Jagan Teki
2019-04-25 17:34 ` [PATCH v3 10/13] rockchip: rk3399: Add Nanopi NEO4 " Jagan Teki
2019-04-25 17:34 ` [PATCH v3 11/13] rockchip: rk3399: Add Rockpro64 " Jagan Teki
2019-04-25 17:34 ` [PATCH v3 12/13] rockchip: rk3399: Add Rock PI 4 support Jagan Teki
2019-04-25 17:34 ` [PATCH v3 13/13] doc: rockchip: Add global doc for rk3399 build/flash Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190425173427.13445-5-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=akash-oRp2ZoJdM/RWk0Htik3J/w@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=paul.kocialkowski-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox