Re: [PATCH v6 03/16] media: v4l2-common: Support custom imagesize in fill_pixfmt()

[Boris Brezillon <boris.brezillon-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>]

On Wed, 29 May 2019 11:04:35 -0300
Ezequiel Garcia <ezequiel-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org> wrote:

> On Wed, 2019-05-29 at 14:31 +0200, Hans Verkuil wrote:
> > On 5/29/19 2:16 PM, Boris Brezillon wrote:  
> > > On Wed, 29 May 2019 08:58:54 -0300
> > > Mauro Carvalho Chehab <mchehab+samsung-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> wrote:
> > >   
> > > > Em Wed, 29 May 2019 13:43:20 +0200
> > > > Hans Verkuil <hverkuil-qWit8jRvyhVmR6Xm/wNWPw@public.gmane.org> escreveu:
> > > >   
> > > > > On 5/29/19 1:28 PM, Mauro Carvalho Chehab wrote:    
> > > > > > Em Tue, 28 May 2019 14:02:19 -0300
> > > > > > Ezequiel Garcia <ezequiel-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org> escreveu:
> > > > > >       
> > > > > > > From: Boris Brezillon <boris.brezillon-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> > > > > > > 
> > > > > > > Users can define custom sizeimage as long as they're big enough to
> > > > > > > store the amount of pixels required for a specific width/height under a
> > > > > > > specific format. Avoid overriding those fields in this case.
> > > > > > > 
> > > > > > > We could possibly do the same for bytesperline, but it gets tricky when
> > > > > > > dealing with !MPLANE definitions, so this case is omitted for now and      
> > > > > > > ->bytesperline is always overwritten with the value calculated in      
> > > > > > > fill_pixfmt().
> > > > > > > 
> > > > > > > Signed-off-by: Boris Brezillon <boris.brezillon-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
> > > > > > > ---
> > > > > > > Changes from v5:
> > > > > > > * Overwrite bytesperline with the value calculated in fill_pixfmt()
> > > > > > > 
> > > > > > > Changes from v4:
> > > > > > > * New patch
> > > > > > > 
> > > > > > >  drivers/media/v4l2-core/v4l2-common.c | 58 ++++++++++++++++++++-------
> > > > > > >  1 file changed, 43 insertions(+), 15 deletions(-)
> > > > > > > 
> > > > > > > diff --git a/drivers/media/v4l2-core/v4l2-common.c b/drivers/media/v4l2-core/v4l2-common.c
> > > > > > > index b2d1e55d9561..fd286f6e17d7 100644
> > > > > > > --- a/drivers/media/v4l2-core/v4l2-common.c
> > > > > > > +++ b/drivers/media/v4l2-core/v4l2-common.c
> > > > > > > @@ -585,9 +585,9 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt,
> > > > > > >  	pixfmt->num_planes = info->mem_planes;
> > > > > > >  
> > > > > > >  	if (info->mem_planes == 1) {
> > > > > > > +		u32 sizeimage = 0;
> > > > > > > +
> > > > > > >  		plane = &pixfmt->plane_fmt[0];
> > > > > > > -		plane->bytesperline = ALIGN(width, v4l2_format_block_width(info, 0)) * info->bpp[0];
> > > > > > > -		plane->sizeimage = 0;
> > > > > > >  
> > > > > > >  		for (i = 0; i < info->comp_planes; i++) {
> > > > > > >  			unsigned int hdiv = (i == 0) ? 1 : info->hdiv;
> > > > > > > @@ -598,10 +598,21 @@ int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt,
> > > > > > >  			aligned_width = ALIGN(width, v4l2_format_block_width(info, i));
> > > > > > >  			aligned_height = ALIGN(height, v4l2_format_block_height(info, i));
> > > > > > >  
> > > > > > > -			plane->sizeimage += info->bpp[i] *
> > > > > > > -				DIV_ROUND_UP(aligned_width, hdiv) *
> > > > > > > -				DIV_ROUND_UP(aligned_height, vdiv);
> > > > > > > +			sizeimage += info->bpp[i] *
> > > > > > > +				     DIV_ROUND_UP(aligned_width, hdiv) *
> > > > > > > +				     DIV_ROUND_UP(aligned_height, vdiv);
> > > > > > >  		}
> > > > > > > +
> > > > > > > +		/* Custom bytesperline value is not supported yet. */
> > > > > > > +		plane->bytesperline = ALIGN(width,
> > > > > > > +					    v4l2_format_block_width(info, 0)) *
> > > > > > > +				      info->bpp[0];
> > > > > > > +
> > > > > > > +		/*
> > > > > > > +		 * The user might have specified a custom sizeimage, only
> > > > > > > +		 * override it if it's not big enough.
> > > > > > > +		 */
> > > > > > > +		plane->sizeimage = max(sizeimage, plane->sizeimage);      
> > > > > > 
> > > > > > No upper limit? That doesn't sound a good idea to me, specially since some
> > > > > > (broken) app might not be memset the format to zero before filling the ioctl
> > > > > > structure.
> > > > > > 
> > > > > > Perhaps we could do something like:
> > > > > > 
> > > > > > 		sizeimage = min (sizeimage, 2 * plane->sizeimage)
> > > > > > 
> > > > > > or something similar that would be reasonable.      
> > > > > 
> > > > > I've no idea what's sane.
> > > > > 
> > > > > Buffers can be really large. The largest video resolution defined by CTA-861-G
> > > > > is 10240x4320, so at 4 bytes per pixel that's 0x0a8c0000. So perhaps we can
> > > > > use min(sizeimage, 0x10000000)? Although we should probably use the clamp function
> > > > > instead of min/max.    
> > > > 
> > > > Well, the max is driver-specific. 
> > > > 
> > > > For example, for a camera with a max resolution of 640x480 with 2 bytes
> > > > per pixel as the max format can only be
> > > > 
> > > > 	max_size = 640*480*2 (plus some alignment value if pertinent)
> > > > 
> > > > It sounds to me that the best would be to have a callback function
> > > > or value filled by the drivers that would support custom sizeimage.
> > > > 
> > > > The core could actually calculate during init (by asking the driver
> > > > to a very big resolution and getting the returned value), but
> > > > it sounds better to let the drivers to explicitly calculate it.  
> > > 
> > > If we want max_sizeimage to be driver specific I can add it as an extra
> > > arg to the fill_pixfmt() funcs.  
> > 
> > Looking more closely, only compressed formats can accept a user-specified
> > sizeimage value, and this function is only called for uncompressed formats.
> > 
> > So doesn't that mean that this sizeimage override code can be dropped?
> >   
> 
> I think this is a good idea, which means just picking all patches except this one
> (and the RK3328 one).
> 
> So it would be patches: 1,2 and 4 to 15.
> 
> Boris, Hans: are you OK with this?

I doesn't work => the prototype of the fill_pixfmt() changed.