From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hugh Cole-Baker Subject: [PATCH] arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Date: Sat, 21 Sep 2019 14:14:57 +0100 Message-ID: <20190921131457.36258-1-sigmaris@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: devicetree@vger.kernel.org Cc: Mark Rutland , Heiko Stuebner , Akash Gajjar , linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, Rob Herring , Hugh Cole-Baker , linux-arm-kernel@lists.infradead.org List-Id: linux-rockchip.vger.kernel.org Fix the pinctrl and interrupt specifier for RK808 to use GPIO3_B2. On the Rockpro64 schematic [1] page 16, it shows GPIO3_B2 used for the interrupt line PMIC_INT_L from the RK808, and there's a note which translates as: "PMU termination GPIO1_C5 changed to this". Tested by setting an RTC wakealarm and checking /proc/interrupts counters. Without this patch, neither the rockchip_gpio_irq counter for the RK808, nor the RTC alarm counter increment when the alarm time is reached. With this patch, both interrupt counters increment by 1 as expected. [1] http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf Fixes: e4f3fb4 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Signed-off-by: Hugh Cole-Baker --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index 0401d4ec1f45..c27d8a6ae1c5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -247,8 +247,8 @@ rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; - interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <1>; clock-output-names = "xin32k", "rk808-clkout2"; pinctrl-names = "default"; @@ -574,7 +574,7 @@ pmic { pmic_int_l: pmic-int-l { - rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; vsel1_gpio: vsel1-gpio { -- 2.17.2 (Apple Git-113)