From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Heiko Stuebner
<heiko.stuebner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>,
heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
christoph.muellner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org
Subject: [PATCH 1/2] arm64: dts: rockchip: add thermal infrastructure to px30
Date: Sat, 16 Nov 2019 10:52:48 +0100 [thread overview]
Message-ID: <20191116095249.31193-1-heiko@sntech.de> (raw)
From: Heiko Stuebner <heiko.stuebner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
Add tsadc and necessary connections to core px30 components.
Signed-off-by: Heiko Stuebner <heiko.stuebner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 71 ++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index c9cb73ba7bec..c68d6fede53d 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/px30-power.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,px30";
@@ -181,6 +182,55 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ thermal_zones: thermal-zones {
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <750>;
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ threshold: trip-point-0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: trip-point-1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc_crit: soc-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+
+ map1 {
+ trip = <&target>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+ };
+
+ gpu_thermal: gpu-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&tsadc 1>;
+ };
+ };
+
xin24m: xin24m {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -645,6 +695,26 @@
};
};
+ tsadc: tsadc@ff280000 {
+ compatible = "rockchip,px30-tsadc";
+ reg = <0x0 0xff280000 0x0 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <50000>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ rockchip,grf = <&grf>;
+ rockchip,hw-tshut-temp = <120000>;
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&tsadc_otp_gpio>;
+ pinctrl-1 = <&tsadc_otp_out>;
+ pinctrl-2 = <&tsadc_otp_gpio>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
saradc: saradc@ff288000 {
compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
reg = <0x0 0xff288000 0x0 0x100>;
@@ -886,6 +956,7 @@
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru SCLK_GPU>;
+ #cooling-cells = <2>;
power-domains = <&power PX30_PD_GPU>;
status = "disabled";
};
--
2.24.0
next reply other threads:[~2019-11-16 9:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-16 9:52 Heiko Stuebner [this message]
2019-11-16 9:52 ` [PATCH 2/2] arm64: dts: rockchip: enable tsadc on px30-evb Heiko Stuebner
2019-11-18 0:58 ` [PATCH 1/2] arm64: dts: rockchip: add thermal infrastructure to px30 Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191116095249.31193-1-heiko@sntech.de \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=christoph.muellner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=heiko.stuebner-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox