From mboxrd@z Thu Jan 1 00:00:00 1970 From: Johan Jonker Subject: [PATCH] dt-bindings: usb: dwc2: add power-domains property Date: Sat, 25 Apr 2020 19:08:33 +0200 Message-ID: <20200425170833.26718-1-jbx6244@gmail.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rockchip.vger.kernel.org A test with the command below gives this error: arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' With the conversion to yaml it also filters things in a node that are used by other drivers like 'power-domains' for Rockchip px30 usb nodes, so add them to 'dwc2.yaml'. make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml Signed-off-by: Johan Jonker --- Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml index fb2f62aef..9352a8ef6 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.yaml +++ b/Documentation/devicetree/bindings/usb/dwc2.yaml @@ -78,6 +78,9 @@ properties: phy-names: const: usb2-phy + power-domains: + maxItems: 1 + vbus-supply: description: reference to the VBUS regulator. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The -- 2.11.0