From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH v2 1/3] dt-bindings: leds: common: Drop enumeration for linux,default-triggers Date: Mon, 27 Apr 2020 15:31:30 +0800 Message-ID: <20200427073132.29997-2-wens@kernel.org> References: <20200427073132.29997-1-wens@kernel.org> Mime-Version: 1.0 Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200427073132.29997-1-wens@kernel.org> Sender: linux-leds-owner@vger.kernel.org To: Heiko Stuebner , Rob Herring , Jacek Anaszewski , Pavel Machek , Dan Murphy Cc: Chen-Yu Tsai , linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-rockchip.vger.kernel.org From: Chen-Yu Tsai The bindings currently list a very small subset of valid triggers for LEDs. Since many drivers or subsystems in Linux register custom triggers, the list would become very hard to maintain. Instead, just drop the list and allow free form strings. Signed-off-by: Chen-Yu Tsai --- .../devicetree/bindings/leds/common.yaml | 21 +------------------ 1 file changed, 1 insertion(+), 20 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 4c270fde4567..3b3cdab3fc15 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -79,26 +79,7 @@ properties: description: This parameter, if present, is a string defining the trigger assigned to the LED. - allOf: - - $ref: /schemas/types.yaml#definitions/string - enum: - # LED will act as a back-light, controlled by the framebuffer system - - backlight - # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.yaml) - - default-on - # LED "double" flashes at a load average based rate - - heartbeat - # LED indicates disk activity - - disk-activity - # LED indicates IDE disk activity (deprecated), in new implementations - # use "disk-activity" - - ide-disk - # LED flashes at a fixed, configurable rate - - timer - # LED alters the brightness for the specified duration with one software - # timer (requires "led-pattern" property) - - pattern + $ref: /schemas/types.yaml#definitions/string led-pattern: description: | -- 2.26.0