From mboxrd@z Thu Jan 1 00:00:00 1970 From: Johan Jonker Subject: [PATCH] dt-bindings: input: touchscreen: edt-ft5x06: change reg property Date: Wed, 20 May 2020 09:33:27 +0200 Message-ID: <20200520073327.6016-1-jbx6244@gmail.com> Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: linux-rockchip.vger.kernel.org A test with the command below gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: touchscreen@3e: reg:0:0: 56 was expected The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models was shipped with different addresses then the binding currently allows. Change the reg property that any address will pass. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/ edt-ft5x06.yaml Signed-off-by: Johan Jonker --- Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 383d64a91..baa8e8f7e 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -42,7 +42,7 @@ properties: - focaltech,ft6236 reg: - const: 0x38 + maxItems: 1 interrupts: maxItems: 1 -- 2.11.0