From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
p.zabel@pengutronix.de, yifeng.zhao@rock-chips.com,
kever.yang@rock-chips.com, cl@rock-chips.com,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [RFC PATCH v4 4/4] arm64: dts: rockchip: add naneng combo phy nodes for rk3568
Date: Wed, 8 Dec 2021 19:54:49 +0100 [thread overview]
Message-ID: <20211208185449.16763-5-jbx6244@gmail.com> (raw)
In-Reply-To: <20211208185449.16763-1-jbx6244@gmail.com>
From: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Add the core dt-node for the rk3568's naneng combo phys.
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Changed V4:
rename node name
remove reset-names
move #phy-cells
add rockchip,rk3568-pipe-grf
add rockchip,rk3568-pipe-phy-grf
---
arch/arm64/boot/dts/rockchip/rk3568.dtsi | 21 +++++++++++
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 47 ++++++++++++++++++++++++
2 files changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 2fd313a29..f11ab963b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -8,6 +8,11 @@
/ {
compatible = "rockchip,rk3568";
+ pipe_phy_grf0: syscon@fdc70000 {
+ compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfdc70000 0x0 0x1000>;
+ };
+
qos_pcie3x1: qos@fe190080 {
compatible = "rockchip,rk3568-qos", "syscon";
reg = <0x0 0xfe190080 0x0 0x20>;
@@ -71,6 +76,22 @@
queue0 {};
};
};
+
+ combphy0: phy@fe820000 {
+ compatible = "rockchip,rk3568-naneng-combphy";
+ reg = <0x0 0xfe820000 0x0 0x100>;
+ clocks = <&pmucru CLK_PCIEPHY0_REF>,
+ <&cru PCLK_PIPEPHY0>,
+ <&cru PCLK_PIPE>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_P_PIPEPHY0>, <&cru SRST_PIPEPHY0>;
+ rockchip,pipe-grf = <&pipegrf>;
+ rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
};
&cpu0_opp_table {
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 46d9552f6..2096fd820 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -214,11 +214,26 @@
};
};
+ pipegrf: syscon@fdc50000 {
+ compatible = "rockchip,rk3568-pipe-grf", "syscon";
+ reg = <0x0 0xfdc50000 0x0 0x1000>;
+ };
+
grf: syscon@fdc60000 {
compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
reg = <0x0 0xfdc60000 0x0 0x10000>;
};
+ pipe_phy_grf1: syscon@fdc80000 {
+ compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfdc80000 0x0 0x1000>;
+ };
+
+ pipe_phy_grf2: syscon@fdc90000 {
+ compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+ reg = <0x0 0xfdc90000 0x0 0x1000>;
+ };
+
pmucru: clock-controller@fdd00000 {
compatible = "rockchip,rk3568-pmucru";
reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -1077,6 +1092,38 @@
status = "disabled";
};
+ combphy1: phy@fe830000 {
+ compatible = "rockchip,rk3568-naneng-combphy";
+ reg = <0x0 0xfe830000 0x0 0x100>;
+ clocks = <&pmucru CLK_PCIEPHY1_REF>,
+ <&cru PCLK_PIPEPHY1>,
+ <&cru PCLK_PIPE>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_P_PIPEPHY1>, <&cru SRST_PIPEPHY1>;
+ rockchip,pipe-grf = <&pipegrf>;
+ rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ combphy2: phy@fe840000 {
+ compatible = "rockchip,rk3568-naneng-combphy";
+ reg = <0x0 0xfe840000 0x0 0x100>;
+ clocks = <&pmucru CLK_PCIEPHY2_REF>,
+ <&cru PCLK_PIPEPHY2>,
+ <&cru PCLK_PIPE>;
+ clock-names = "ref", "apb", "pipe";
+ assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+ assigned-clock-rates = <100000000>;
+ resets = <&cru SRST_P_PIPEPHY2>, <&cru SRST_PIPEPHY2>;
+ rockchip,pipe-grf = <&pipegrf>;
+ rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3568-pinctrl";
rockchip,grf = <&grf>;
--
2.20.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2021-12-08 18:56 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-08 18:54 [RFC PATCH v4 0/4] Add Naneng combo PHY support for RK3568 Johan Jonker
2021-12-08 18:54 ` [RFC PATCH v4 1/4] dt-bindings: mfd: syscon: add naneng combo phy register compatible Johan Jonker
2021-12-10 22:05 ` Rob Herring
2021-12-08 18:54 ` [RFC PATCH v4 2/4] dt-bindings: phy: rockchip: Add Naneng combo PHY bindings Johan Jonker
2021-12-10 22:05 ` Rob Herring
2021-12-14 8:58 ` Vinod Koul
2021-12-14 12:20 ` Johan Jonker
2021-12-08 18:54 ` [RFC PATCH v4 3/4] phy: rockchip: add naneng combo phy for RK3568 Johan Jonker
2021-12-11 14:06 ` Johan Jonker
2021-12-15 11:06 ` 赵仪峰
2021-12-14 9:11 ` Vinod Koul
2021-12-08 18:54 ` Johan Jonker [this message]
2021-12-11 19:18 ` [RFC PATCH v4 0/4] Add Naneng combo PHY support " Nicolas Frattaroli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211208185449.16763-5-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=cl@rock-chips.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kever.yang@rock-chips.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
--cc=yifeng.zhao@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox