From: Nicolas Dufresne <nicolas.dufresne@collabora.com>
To: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: kernel@collabora.com, Jonas Karlman <jonas@kwiboo.se>,
Ezequiel Garcia <ezequiel@collabora.com>,
linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: [PATCH v1 18/24] media: rkvdec: h264: Fix bit depth wrap in pps packet
Date: Mon, 28 Mar 2022 15:59:30 -0400 [thread overview]
Message-ID: <20220328195936.82552-19-nicolas.dufresne@collabora.com> (raw)
In-Reply-To: <20220328195936.82552-1-nicolas.dufresne@collabora.com>
From: Jonas Karlman <jonas@kwiboo.se>
The luma and chroma bit depth fields in the pps packet is 3 bits wide.
8 is wrongly added to the bit depth value written to these 3-bit fields.
Because only the 3 LSB is written the hardware is configured correctly.
Correct this by not adding 8 to the luma and chroma bit depth value.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
---
drivers/staging/media/rkvdec/rkvdec-h264.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 847b8957dad3..ec52b195bbd7 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -662,8 +662,8 @@ static void assemble_hw_pps(struct rkvdec_ctx *ctx,
WRITE_PPS(0xff, PROFILE_IDC);
WRITE_PPS(1, CONSTRAINT_SET3_FLAG);
WRITE_PPS(sps->chroma_format_idc, CHROMA_FORMAT_IDC);
- WRITE_PPS(sps->bit_depth_luma_minus8 + 8, BIT_DEPTH_LUMA);
- WRITE_PPS(sps->bit_depth_chroma_minus8 + 8, BIT_DEPTH_CHROMA);
+ WRITE_PPS(sps->bit_depth_luma_minus8, BIT_DEPTH_LUMA);
+ WRITE_PPS(sps->bit_depth_chroma_minus8, BIT_DEPTH_CHROMA);
WRITE_PPS(0, QPPRIME_Y_ZERO_TRANSFORM_BYPASS_FLAG);
WRITE_PPS(sps->log2_max_frame_num_minus4, LOG2_MAX_FRAME_NUM_MINUS4);
WRITE_PPS(sps->max_num_ref_frames, MAX_NUM_REF_FRAMES);
--
2.34.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2022-03-28 20:00 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220328195936.82552-1-nicolas.dufresne@collabora.com>
2022-03-28 19:59 ` [PATCH v1 01/24] media: h264: Increase reference lists size to 32 Nicolas Dufresne
2022-03-29 8:25 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 12/24] media: rkvdec: Stop overclocking the decoder Nicolas Dufresne
2022-03-29 15:15 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 13/24] media: rkvdec: h264: Fix reference frame_num wrap for second field Nicolas Dufresne
2022-03-29 15:17 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 14/24] media: rkvdec: h264: Fix dpb_valid implementation Nicolas Dufresne
2022-03-29 15:27 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 15/24] media: rkvdec: Enable capture buffer holding for H264 Nicolas Dufresne
2022-03-29 15:34 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 16/24] media: rkvdec: Ensure decoded resolution fit coded resolution Nicolas Dufresne
2022-03-29 15:39 ` Sebastian Fricke
2022-03-30 9:06 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 17/24] media: rkvdec: h264: Validate and use pic width and height in mbs Nicolas Dufresne
2022-03-30 6:48 ` Sebastian Fricke
2022-03-28 19:59 ` Nicolas Dufresne [this message]
2022-03-30 6:59 ` [PATCH v1 18/24] media: rkvdec: h264: Fix bit depth wrap in pps packet Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 19/24] media: rkvdec-h264: Add field decoding support Nicolas Dufresne
2022-03-29 8:13 ` Dan Carpenter
2022-03-29 20:54 ` Nicolas Dufresne
2022-03-30 5:15 ` Dan Carpenter
2022-03-30 13:39 ` Nicolas Dufresne
2022-03-30 15:16 ` Dan Carpenter
2022-03-31 13:40 ` Nicolas Dufresne
2022-03-30 7:10 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 20/24] media: hantro: Enable HOLD_CAPTURE_BUF for H.264 Nicolas Dufresne
2022-03-30 7:36 ` Sebastian Fricke
2022-03-31 18:25 ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 21/24] media: hantro: Stop using H.264 parameter pic_num Nicolas Dufresne
2022-03-30 7:42 ` Sebastian Fricke
2022-03-30 15:08 ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 22/24] media: hantro: h264: Make dpb entry management more robust Nicolas Dufresne
2022-03-30 7:59 ` Sebastian Fricke
2022-03-30 15:15 ` Nicolas Dufresne
2022-03-30 23:43 ` Ezequiel Garcia
2022-03-31 6:54 ` Sebastian Fricke
2022-03-28 19:59 ` [PATCH v1 23/24] media: hantro: Add H.264 field decoding support Nicolas Dufresne
2022-03-30 9:03 ` Sebastian Fricke
2022-03-30 15:25 ` Nicolas Dufresne
2022-03-28 19:59 ` [PATCH v1 24/24] media: rkvdec-h264: Don't hardcode SPS/PPS parameters Nicolas Dufresne
2022-03-29 7:22 ` Sebastian Fricke
2022-03-30 15:27 ` Nicolas Dufresne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220328195936.82552-19-nicolas.dufresne@collabora.com \
--to=nicolas.dufresne@collabora.com \
--cc=ezequiel@collabora.com \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=gregkh@linuxfoundation.org \
--cc=jonas@kwiboo.se \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox