public inbox for linux-rockchip@lists.infradead.org
 help / color / mirror / Atom feed
From: Jianqun Xu <jay.xu@rock-chips.com>
To: jbx6244@gmail.com, heiko@sntech.de, linus.walleij@linaro.org,
	andriy.shevchenko@linux.intel.com
Cc: brgl@bgdev.pl, linux-gpio@vger.kernel.org,
	linux-rockchip@lists.infradead.org,
	Jianqun Xu <jay.xu@rock-chips.com>
Subject: [PATCH 2/2] gpio: rockchip: support acpi
Date: Fri, 16 Sep 2022 16:43:47 +0800	[thread overview]
Message-ID: <20220916084347.458619-3-jay.xu@rock-chips.com> (raw)
In-Reply-To: <20220916084347.458619-1-jay.xu@rock-chips.com>

The gpio driver for rockchip gpio controller is seperated from rockchip
pinctrl driver, at the first version, it keeps things original to make
the patch easy to be reviewed, such as the gpio driver must work with
the pinctrl dt node to be its parent node.

This patch wants to fix driver to support acpi since gpio controller
should work well during acpi is enabled. But during upstream, driver is
better to fix other thing together includes:
 - only get clocks when is_of_node.
 - get io resource and irq by platform common apis.
 - use fwnode instead of of_node from device structure.
 - drop pinctrl related codes.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
---
 drivers/gpio/gpio-rockchip.c | 300 ++++++++++++++++++-----------------
 1 file changed, 158 insertions(+), 142 deletions(-)

diff --git a/drivers/gpio/gpio-rockchip.c b/drivers/gpio/gpio-rockchip.c
index ebb50c25a461..e6ab3a134e1d 100644
--- a/drivers/gpio/gpio-rockchip.c
+++ b/drivers/gpio/gpio-rockchip.c
@@ -6,9 +6,9 @@
  * Copyright (c) 2021 Rockchip Electronics Co. Ltd.
  */
 
+#include <linux/acpi.h>
 #include <linux/bitops.h>
 #include <linux/clk.h>
-#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/gpio/driver.h>
 #include <linux/init.h>
@@ -16,19 +16,90 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
-#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 
-#include "../pinctrl/core.h"
-#include "../pinctrl/pinctrl-rockchip.h"
-
 #define GPIO_TYPE_V1		(0)           /* GPIO Version ID reserved */
 #define GPIO_TYPE_V2		(0x01000C2B)  /* GPIO Version ID 0x01000C2B */
 #define GPIO_TYPE_V2_1		(0x0101157C)  /* GPIO Version ID 0x0101157C */
 
+#define GPIO_MAX_PINS	(32)
+
+/**
+ * struct rockchip_gpio_regs
+ * @port_dr: data register
+ * @port_ddr: data direction register
+ * @int_en: interrupt enable
+ * @int_mask: interrupt mask
+ * @int_type: interrupt trigger type, such as high, low, edge trriger type.
+ * @int_polarity: interrupt polarity enable register
+ * @int_bothedge: interrupt bothedge enable register
+ * @int_status: interrupt status register
+ * @int_rawstatus: int_status = int_rawstatus & int_mask
+ * @debounce: enable debounce for interrupt signal
+ * @dbclk_div_en: enable divider for debounce clock
+ * @dbclk_div_con: setting for divider of debounce clock
+ * @port_eoi: end of interrupt of the port
+ * @ext_port: port data from external
+ * @version_id: controller version register
+ */
+struct rockchip_gpio_regs {
+	u32 port_dr;
+	u32 port_ddr;
+	u32 int_en;
+	u32 int_mask;
+	u32 int_type;
+	u32 int_polarity;
+	u32 int_bothedge;
+	u32 int_status;
+	u32 int_rawstatus;
+	u32 debounce;
+	u32 dbclk_div_en;
+	u32 dbclk_div_con;
+	u32 port_eoi;
+	u32 ext_port;
+	u32 version_id;
+};
+
+/**
+ * struct rockchip_pin_bank
+ * @dev: the pinctrl device bind to the bank
+ * @reg_base: register base of the gpio bank
+ * @clk: clock of the gpio bank
+ * @db_clk: clock of the gpio debounce
+ * @irq: interrupt of the gpio bank
+ * @saved_masks: Saved content of GPIO_INTEN at suspend time.
+ * @pin_base: first pin number
+ * @nr_pins: number of pins in this bank
+ * @name: name of the bank
+ * @bank_num: number of the bank, to account for holes
+ * @domain: irqdomain of the gpio bank
+ * @gpio_chip: gpiolib chip
+ * @grange: gpio range
+ * @slock: spinlock for the gpio bank
+ * @toggle_edge_mode: bit mask to toggle (falling/rising) edge mode
+ */
+struct rockchip_pin_bank {
+	struct device			*dev;
+	void __iomem			*reg_base;
+	struct clk			*clk;
+	struct clk			*db_clk;
+	int				irq;
+	u32				saved_masks;
+	u32				pin_base;
+	u8				nr_pins;
+	char				*name;
+	u8				bank_num;
+	struct device_node		*of_node;
+	struct irq_domain		*domain;
+	struct gpio_chip		gpio_chip;
+	raw_spinlock_t			slock;
+	const struct rockchip_gpio_regs	*gpio_regs;
+	u32				gpio_type;
+	u32				toggle_edge_mode;
+};
+
 static const struct rockchip_gpio_regs gpio_regs_v1 = {
 	.port_dr = 0x00,
 	.port_ddr = 0x04,
@@ -200,6 +271,9 @@ static int rockchip_gpio_set_debounce(struct gpio_chip *gc,
 	if (bank->gpio_type == GPIO_TYPE_V2 && !IS_ERR(bank->db_clk)) {
 		div_debounce_support = true;
 		freq = clk_get_rate(bank->db_clk);
+		if (!freq)
+			return -EINVAL;
+
 		max_debounce = (GENMASK(23, 0) + 1) * 2 * 1000000 / freq;
 		if (debounce > max_debounce)
 			return -EINVAL;
@@ -507,21 +581,20 @@ static int rockchip_interrupts_register(struct rockchip_pin_bank *bank)
 	struct irq_chip_generic *gc;
 	int ret;
 
-	bank->domain = irq_domain_add_linear(bank->of_node, 32,
-					&irq_generic_chip_ops, NULL);
+	bank->domain = irq_domain_create_linear(dev_fwnode(bank->dev),
+						GPIO_MAX_PINS,
+						&irq_generic_chip_ops, NULL);
 	if (!bank->domain) {
-		dev_warn(bank->dev, "could not init irq domain for bank %s\n",
-			 bank->name);
+		dev_warn(bank->dev, "could not init irq domain\n");
 		return -EINVAL;
 	}
 
-	ret = irq_alloc_domain_generic_chips(bank->domain, 32, 1,
+	ret = irq_alloc_domain_generic_chips(bank->domain, GPIO_MAX_PINS, 1,
 					     "rockchip_gpio_irq",
 					     handle_level_irq,
 					     clr, 0, 0);
 	if (ret) {
-		dev_err(bank->dev, "could not alloc generic chips for bank %s\n",
-			bank->name);
+		dev_err(bank->dev, "could not alloc generic chips\n");
 		irq_domain_remove(bank->domain);
 		return -EINVAL;
 	}
@@ -575,8 +648,13 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
 	gc = &bank->gpio_chip;
 	gc->base = bank->pin_base;
 	gc->ngpio = bank->nr_pins;
-	gc->label = bank->name;
 	gc->parent = bank->dev;
+	gc->label = devm_kasprintf(bank->dev, GFP_KERNEL, "gpio%d", bank->bank_num);
+	if (!gc->label)
+		return -ENOMEM;
+#ifdef CONFIG_OF_GPIO
+	gc->of_node = of_node_get(bank->dev->of_node);
+#endif
 
 	ret = gpiochip_add_data(gc, bank);
 	if (ret) {
@@ -585,35 +663,6 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
 		return ret;
 	}
 
-	/*
-	 * For DeviceTree-supported systems, the gpio core checks the
-	 * pinctrl's device node for the "gpio-ranges" property.
-	 * If it is present, it takes care of adding the pin ranges
-	 * for the driver. In this case the driver can skip ahead.
-	 *
-	 * In order to remain compatible with older, existing DeviceTree
-	 * files which don't set the "gpio-ranges" property or systems that
-	 * utilize ACPI the driver has to call gpiochip_add_pin_range().
-	 */
-	if (!of_property_read_bool(bank->of_node, "gpio-ranges")) {
-		struct device_node *pctlnp = of_get_parent(bank->of_node);
-		struct pinctrl_dev *pctldev = NULL;
-
-		if (!pctlnp)
-			return -ENODATA;
-
-		pctldev = of_pinctrl_get(pctlnp);
-		if (!pctldev)
-			return -ENODEV;
-
-		ret = gpiochip_add_pin_range(gc, dev_name(pctldev->dev), 0,
-					     gc->base, gc->ngpio);
-		if (ret) {
-			dev_err(bank->dev, "Failed to add pin range\n");
-			goto fail;
-		}
-	}
-
 	ret = rockchip_interrupts_register(bank);
 	if (ret) {
 		dev_err(bank->dev, "failed to register interrupt, %d\n", ret);
@@ -628,144 +677,110 @@ static int rockchip_gpiolib_register(struct rockchip_pin_bank *bank)
 	return ret;
 }
 
-static int rockchip_get_bank_data(struct rockchip_pin_bank *bank)
+static int rockchip_gpio_set_regs(struct rockchip_pin_bank *bank)
 {
-	struct resource res;
-	int id = 0;
-
-	if (of_address_to_resource(bank->of_node, 0, &res)) {
-		dev_err(bank->dev, "cannot find IO resource for bank\n");
-		return -ENOENT;
-	}
-
-	bank->reg_base = devm_ioremap_resource(bank->dev, &res);
-	if (IS_ERR(bank->reg_base))
-		return PTR_ERR(bank->reg_base);
-
-	bank->irq = irq_of_parse_and_map(bank->of_node, 0);
-	if (!bank->irq)
-		return -EINVAL;
+	struct device *dev = bank->dev;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	int version_id;
+	int ret;
 
-	bank->clk = of_clk_get(bank->of_node, 0);
-	if (IS_ERR(bank->clk))
-		return PTR_ERR(bank->clk);
+	if (is_of_node(fwnode)) {
+		bank->clk = of_clk_get(to_of_node(fwnode), 0);
+		if (IS_ERR(bank->clk))
+			return PTR_ERR(bank->clk);
 
-	clk_prepare_enable(bank->clk);
-	id = readl(bank->reg_base + gpio_regs_v2.version_id);
+		ret = clk_prepare_enable(bank->clk);
+		if (ret < 0)
+			return ret;
+	}
 
-	/* If not gpio v2, that is default to v1. */
-	if (id == GPIO_TYPE_V2 || id == GPIO_TYPE_V2_1) {
+	version_id = readl(bank->reg_base + gpio_regs_v2.version_id);
+	if (version_id == GPIO_TYPE_V2 || version_id == GPIO_TYPE_V2_1) {
 		bank->gpio_regs = &gpio_regs_v2;
 		bank->gpio_type = GPIO_TYPE_V2;
-		bank->db_clk = of_clk_get(bank->of_node, 1);
-		if (IS_ERR(bank->db_clk)) {
-			dev_err(bank->dev, "cannot find debounce clk\n");
-			clk_disable_unprepare(bank->clk);
-			return -EINVAL;
-		}
 	} else {
 		bank->gpio_regs = &gpio_regs_v1;
 		bank->gpio_type = GPIO_TYPE_V1;
 	}
 
+	if (bank->gpio_type == GPIO_TYPE_V2 && is_of_node(fwnode)) {
+		bank->db_clk = of_clk_get(to_of_node(fwnode), 1);
+		if (IS_ERR(bank->db_clk))
+			return PTR_ERR(bank->db_clk);
+
+		ret = clk_prepare_enable(bank->db_clk);
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
-static struct rockchip_pin_bank *
-rockchip_gpio_find_bank(struct pinctrl_dev *pctldev, int id)
+static int rockchip_gpio_get_bank_id(struct device *dev)
 {
-	struct rockchip_pinctrl *info;
-	struct rockchip_pin_bank *bank;
-	int i, found = 0;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	int bank_id = -EINVAL;
+	u64 uid;
+	int ret;
+	static int gpio;
 
-	info = pinctrl_dev_get_drvdata(pctldev);
-	bank = info->ctrl->pin_banks;
-	for (i = 0; i < info->ctrl->nr_banks; i++, bank++) {
-		if (bank->bank_num == id) {
-			found = 1;
-			break;
-		}
+	if (is_acpi_node(fwnode)) {
+		ret = acpi_dev_uid_to_integer(ACPI_COMPANION(dev), &uid);
+		if (ret < 0)
+			return ret;
+
+		bank_id = uid;
+	} else {
+		bank_id = of_alias_get_id(to_of_node(fwnode), "gpio");
+		if (bank_id < 0)
+			bank_id = gpio++;
 	}
 
-	return found ? bank : NULL;
+	return bank_id;
 }
 
 static int rockchip_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
-	struct device_node *pctlnp = of_get_parent(np);
-	struct pinctrl_dev *pctldev = NULL;
-	struct rockchip_pin_bank *bank = NULL;
-	struct rockchip_pin_deferred *cfg;
-	static int gpio;
-	int id, ret;
+	struct rockchip_pin_bank *bank;
+	int ret;
 
-	if (!np || !pctlnp)
-		return -ENODEV;
+	bank = devm_kzalloc(dev, sizeof(*bank), GFP_KERNEL);
+	if (!bank)
+		return -ENOMEM;
 
-	pctldev = of_pinctrl_get(pctlnp);
-	if (!pctldev)
-		return -EPROBE_DEFER;
+	bank->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(bank->reg_base))
+		return PTR_ERR(bank->reg_base);
 
-	id = of_alias_get_id(np, "gpio");
-	if (id < 0)
-		id = gpio++;
+	bank->irq = platform_get_irq(pdev, 0);
+	if (bank->irq < 0)
+		return bank->irq;
 
-	bank = rockchip_gpio_find_bank(pctldev, id);
-	if (!bank)
-		return -EINVAL;
+	bank->bank_num = rockchip_gpio_get_bank_id(dev);
+	if (bank->bank_num < 0)
+		return bank->bank_num;
 
 	bank->dev = dev;
-	bank->of_node = np;
-
-	raw_spin_lock_init(&bank->slock);
+	bank->pin_base = GPIO_MAX_PINS * bank->bank_num;
+	bank->nr_pins = GPIO_MAX_PINS;
 
-	ret = rockchip_get_bank_data(bank);
+	ret = rockchip_gpio_set_regs(bank);
 	if (ret)
 		return ret;
 
-	/*
-	 * Prevent clashes with a deferred output setting
-	 * being added right at this moment.
-	 */
-	mutex_lock(&bank->deferred_lock);
+	raw_spin_lock_init(&bank->slock);
 
 	ret = rockchip_gpiolib_register(bank);
 	if (ret) {
+		dev_err(bank->dev, "Failed to register gpio %d\n", ret);
 		clk_disable_unprepare(bank->clk);
-		mutex_unlock(&bank->deferred_lock);
+		clk_disable_unprepare(bank->db_clk);
 		return ret;
 	}
 
-	while (!list_empty(&bank->deferred_pins)) {
-		cfg = list_first_entry(&bank->deferred_pins,
-				       struct rockchip_pin_deferred, head);
-		list_del(&cfg->head);
-
-		switch (cfg->param) {
-		case PIN_CONFIG_OUTPUT:
-			ret = rockchip_gpio_direction_output(&bank->gpio_chip, cfg->pin, cfg->arg);
-			if (ret)
-				dev_warn(dev, "setting output pin %u to %u failed\n", cfg->pin,
-					 cfg->arg);
-			break;
-		case PIN_CONFIG_INPUT_ENABLE:
-			ret = rockchip_gpio_direction_input(&bank->gpio_chip, cfg->pin);
-			if (ret)
-				dev_warn(dev, "setting input pin %u failed\n", cfg->pin);
-			break;
-		default:
-			dev_warn(dev, "unknown deferred config param %d\n", cfg->param);
-			break;
-		}
-		kfree(cfg);
-	}
-
-	mutex_unlock(&bank->deferred_lock);
-
 	platform_set_drvdata(pdev, bank);
-	dev_info(dev, "probed %pOF\n", np);
+	dev_info(dev, "probed %pfw\n", dev_fwnode(dev));
 
 	return 0;
 }
@@ -775,6 +790,7 @@ static int rockchip_gpio_remove(struct platform_device *pdev)
 	struct rockchip_pin_bank *bank = platform_get_drvdata(pdev);
 
 	clk_disable_unprepare(bank->clk);
+	clk_disable_unprepare(bank->db_clk);
 	gpiochip_remove(&bank->gpio_chip);
 
 	return 0;
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2022-09-16  8:44 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-16  8:43 [PATCH v7 0/2] gpio: rockchip: support acpi Jianqun Xu
2022-09-16  8:43 ` [PATCH 1/2] ACPI: utils: Add acpi_dev_uid_to_integer() helper to get _UID as integer Jianqun Xu
2022-09-16  8:43 ` Jianqun Xu [this message]
2022-09-19 13:54   ` [PATCH 2/2] gpio: rockchip: support acpi Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220916084347.458619-3-jay.xu@rock-chips.com \
    --to=jay.xu@rock-chips.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=brgl@bgdev.pl \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox