public inbox for linux-rockchip@lists.infradead.org
 help / color / mirror / Atom feed
From: Jonas Karlman <jonas@kwiboo.se>
To: Joerg Roedel <joro@8bytes.org>, Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Benjamin Gaignard <benjamin.gaignard@collabora.com>
Cc: iommu@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	Jonas Karlman <jonas@kwiboo.se>, Joerg Roedel <jroedel@suse.de>
Subject: [PATCH v2 1/3] iommu: rockchip: Fix discovery table address encoding
Date: Thu, 15 Jun 2023 20:10:46 +0000 (UTC)	[thread overview]
Message-ID: <20230615201042.2291867-2-jonas@kwiboo.se> (raw)
In-Reply-To: <20230615201042.2291867-1-jonas@kwiboo.se>

The address to the discovery table is currently encoded using the
following bit layout.

 31:12 - Address bit 31:0
 11: 4 - Address bit 39:32

This is also the bit layout used by the vendor kernel.

However, testing has shown that addresses to the discovery/page tables
and memory pages are all encoded using the same bit layout.

IOMMU v1:
 31:12 - Address bit 31:0

IOMMU v2:
 31:12 - Address bit 31:0
 11: 8 - Address bit 35:32
  7: 4 - Address bit 39:36

Change to use the mk_dtentries ops to encode the discovery table address
correctly. Also update the bit layout comment for the page address.

These changes render the dte_addr_phys and dma_addr_dte ops unused
and will be removed in a following patch.

Fixes: 227014b33f62 ("iommu: rockchip: Add internal ops to handle variants")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
v2:
- replace currently with correctly in commit message

 drivers/iommu/rockchip-iommu.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/rockchip-iommu.c b/drivers/iommu/rockchip-iommu.c
index 4054030c3237..d46319f77e5c 100644
--- a/drivers/iommu/rockchip-iommu.c
+++ b/drivers/iommu/rockchip-iommu.c
@@ -278,8 +278,8 @@ static u32 rk_mk_pte(phys_addr_t page, int prot)
 /*
  * In v2:
  * 31:12 - Page address bit 31:0
- *  11:9 - Page address bit 34:32
- *   8:4 - Page address bit 39:35
+ * 11: 8 - Page address bit 35:32
+ *  7: 4 - Page address bit 39:36
  *     3 - Security
  *     2 - Writable
  *     1 - Readable
@@ -577,7 +577,7 @@ static void log_iova(struct rk_iommu *iommu, int index, dma_addr_t iova)
 	page_offset = rk_iova_page_offset(iova);
 
 	mmu_dte_addr = rk_iommu_read(base, RK_MMU_DTE_ADDR);
-	mmu_dte_addr_phys = rk_ops->dte_addr_phys(mmu_dte_addr);
+	mmu_dte_addr_phys = rk_ops->pt_address(mmu_dte_addr);
 
 	dte_addr_phys = mmu_dte_addr_phys + (4 * dte_index);
 	dte_addr = phys_to_virt(dte_addr_phys);
@@ -967,7 +967,7 @@ static int rk_iommu_enable(struct rk_iommu *iommu)
 
 	for (i = 0; i < iommu->num_mmu; i++) {
 		rk_iommu_write(iommu->bases[i], RK_MMU_DTE_ADDR,
-			       rk_ops->dma_addr_dte(rk_domain->dt_dma));
+			       rk_ops->mk_dtentries(rk_domain->dt_dma));
 		rk_iommu_base_command(iommu->bases[i], RK_MMU_CMD_ZAP_CACHE);
 		rk_iommu_write(iommu->bases[i], RK_MMU_INT_MASK, RK_MMU_IRQ_MASK);
 	}
-- 
2.40.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2023-06-15 20:11 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15 20:10 [PATCH v2 0/3] iommu: rockchip: Fix discovery table address encoding Jonas Karlman
2023-06-15 20:10 ` Jonas Karlman [this message]
2023-06-15 21:24   ` [PATCH v2 1/3] " Robin Murphy
2023-06-15 21:55     ` Jonas Karlman
2023-06-15 20:10 ` [PATCH v2 2/3] iommu: rockchip: Remove unused variant ops Jonas Karlman
2023-06-15 20:10 ` [PATCH v2 3/3] iommu: rockchip: Allocate tables from all available memory Jonas Karlman
2023-06-15 21:25   ` Robin Murphy
2023-06-15 22:26     ` Jonas Karlman
2023-06-16 10:58       ` Robin Murphy
2023-06-17 15:30         ` Jonas Karlman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230615201042.2291867-2-jonas@kwiboo.se \
    --to=jonas@kwiboo.se \
    --cc=benjamin.gaignard@collabora.com \
    --cc=heiko@sntech.de \
    --cc=iommu@lists.linux.dev \
    --cc=joro@8bytes.org \
    --cc=jroedel@suse.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robin.murphy@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox