From: Alex Bee <knaerzche@gmail.com>
To: Heiko Stuebner <heiko@sntech.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Alex Bee <knaerzche@gmail.com>
Subject: [PATCH 1/3] ARM: dts: rockchip: Move gpio aliases to SoC dtsi for RK3128
Date: Sat, 2 Dec 2023 14:05:05 +0100 [thread overview]
Message-ID: <20231202130506.66738-3-knaerzche@gmail.com> (raw)
In-Reply-To: <20231202130506.66738-2-knaerzche@gmail.com>
SoC TRM, SoC datasheet and board schematics always refer to the
same gpio numbers - even if not all are used for a specific board.
In order to not have to re-define them for every board move the
aliases to SoC dtsi for RK3128 like it's being done for most other
Rockchip ARM SoCs.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm/boot/dts/rockchip/rk3128-evb.dts | 4 ----
arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts | 4 ----
arch/arm/boot/dts/rockchip/rk3128.dtsi | 7 +++++++
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
index c38f42497cbd..776a483cc26b 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts
@@ -12,10 +12,6 @@ / {
compatible = "rockchip,rk3128-evb", "rockchip,rk3128";
aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
i2c1 = &i2c1;
mmc0 = &emmc;
};
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 61b9f069c8a2..b448e2b96e08 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -11,10 +11,6 @@ / {
compatible = "geniatech,xpi-3128", "rockchip,rk3128";
aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
mmc0 = &emmc;
mmc1 = &sdmmc;
serial0 = &uart1;
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index 4e8b38604ecd..5b751284d6ca 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -15,6 +15,13 @@ / {
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ };
+
arm-pmu {
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
--
2.43.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2023-12-02 13:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-02 13:05 [PATCH 0/3] Move core bus and gpio aliases to SoC dtsi for RK3128 Alex Bee
2023-12-02 13:05 ` Alex Bee [this message]
2023-12-02 13:05 ` [PATCH 2/3] ARM: dts: rockchip: Move i2c " Alex Bee
2023-12-02 13:05 ` [PATCH] ARM: dts: rockchip: Move uart " Alex Bee
2023-12-05 0:05 ` [PATCH 0/3] Move core bus and gpio " Heiko Stuebner
2023-12-05 13:33 ` Alex Bee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231202130506.66738-3-knaerzche@gmail.com \
--to=knaerzche@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox