Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Yan <andyshrk@163.com>
To: heiko@sntech.de
Cc: jbx6244@gmail.com, krzysztof.kozlowski+dt@linaro.org,
	robh+dt@kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	david.wu@rock-chips.com, Andy Yan <andy.yan@rock-chips.com>
Subject: [PATCH] Revert "ARM: dts: rockchip: restyle emac nodes"
Date: Wed, 20 Dec 2023 18:33:34 +0800	[thread overview]
Message-ID: <20231220103334.2665543-1-andyshrk@163.com> (raw)

From: Andy Yan <andy.yan@rock-chips.com>

When try to run rk3036 kylin board with mainline,
I found the emac ethernet probe failed:

[    2.324583] loop: module loaded
[    2.328435] SPI driver spidev has no spi_device_id for rockchip,spidev
[    2.338688] tun: Universal TUN/TAP device driver, 1.6
[    2.345397] rockchip_emac 10200000.ethernet: no regulator found
[    2.351892] rockchip_emac 10200000.ethernet: ARC EMAC detected with id: 0x7fd02
[    2.359331] rockchip_emac 10200000.ethernet: IRQ is 43
[    2.364719] rockchip_emac 10200000.ethernet: MAC address is now e6:58:d6:ec:d9:7c
[    2.396993] mdio_bus Synopsys MII Bus: mdio has invalid PHY address
[    2.403306] mdio_bus Synopsys MII Bus: scan phy mdio at address 0
[    2.508656] rockchip_emac 10200000.ethernet: of_phy_connect() failed
[    2.516334] rockchip_emac 10200000.ethernet: failed to probe arc emac (-19)

This reverts commit 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes")
make emac on rk3036 kylin board probe right again:
[    1.920385] CAN device driver interface
[    1.925499] rockchip_emac 10200000.ethernet: no regulator found
[    1.932535] rockchip_emac 10200000.ethernet: ARC EMAC detected with id: 0x7fd02
[    1.940735] rockchip_emac 10200000.ethernet: IRQ is 42
[    1.946743] rockchip_emac 10200000.ethernet: MAC address is now 96:7d:4f:0a:69:b3
[    2.581340] rockchip_emac 10200000.ethernet: connected to Generic PHY phy with id 0xffffc816
[    2.592560] e1000e: Intel(R) PRO/1000 Network Driver
[    2.598136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

Fixes: 1dabb74971b3 ("ARM: dts: rockchip: restyle emac nodes")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
---

 arch/arm/boot/dts/rockchip/rk3036-evb.dts     | 16 ++++++----------
 arch/arm/boot/dts/rockchip/rk3036-kylin.dts   | 16 ++++++----------
 arch/arm/boot/dts/rockchip/rk3036.dtsi        |  2 ++
 .../boot/dts/rockchip/rk3066a-marsboard.dts   | 17 +++++++----------
 .../boot/dts/rockchip/rk3066a-rayeager.dts    | 15 +++++----------
 .../boot/dts/rockchip/rk3188-radxarock.dts    | 19 ++++++++-----------
 arch/arm/boot/dts/rockchip/rk3xxx.dtsi        |  2 ++
 7 files changed, 36 insertions(+), 51 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk3036-evb.dts b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
index becdc0b664bf..94216f870b57 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-evb.dts
@@ -15,20 +15,16 @@ memory@60000000 {
 };
 
 &emac {
-	phy = <&phy0>;
-	phy-reset-duration = <10>; /* millisecond */
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
-	status = "okay";
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
 
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	status = "okay";
 
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
+	phy0: ethernet-phy@0 {
+		reg = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index 67e1e04139e7..e817eba8c622 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -80,20 +80,16 @@ &acodec {
 };
 
 &emac {
-	phy = <&phy0>;
-	phy-reset-duration = <10>; /* millisecond */
-	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
-	status = "okay";
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
 
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	status = "okay";
 
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-		};
+	phy0: ethernet-phy@0 {
+		reg = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi
index 78686fc72ce6..e240b89b0b35 100644
--- a/arch/arm/boot/dts/rockchip/rk3036.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi
@@ -228,6 +228,8 @@ emac: ethernet@10200000 {
 		compatible = "rockchip,rk3036-emac";
 		reg = <0x10200000 0x4000>;
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 		rockchip,grf = <&grf>;
 		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
 		clock-names = "hclk", "macref", "macclk";
diff --git a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
index f6e8d49a02ef..e3d6f0e81330 100644
--- a/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts
@@ -150,21 +150,18 @@ vcc28_cif: regulator@12 {
 #include "../tps65910.dtsi"
 
 &emac {
+	status = "okay";
+
 	phy = <&phy0>;
 	phy-supply = <&vcc_rmii>;
+
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			interrupt-parent = <&gpio1>;
-			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
-		};
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
index 29d8e5bf88f5..096616324c2d 100644
--- a/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
+++ b/arch/arm/boot/dts/rockchip/rk3066a-rayeager.dts
@@ -142,20 +142,15 @@ &cpu1 {
 };
 
 &emac {
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
 	status = "okay";
 
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
-		};
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
index 118deacd38c4..239d2ec37fdc 100644
--- a/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rockchip/rk3188-radxarock.dts
@@ -126,21 +126,18 @@ vsys: vsys-regulator {
 };
 
 &emac {
-	phy = <&phy0>;
-	phy-supply = <&vcc_rmii>;
+	status = "okay";
+
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
-	status = "okay";
 
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
 
-		phy0: ethernet-phy@0 {
-			reg = <0>;
-			interrupt-parent = <&gpio3>;
-			interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
-		};
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
index cb4e42ede56a..17e89d30de78 100644
--- a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi
@@ -193,6 +193,8 @@ emac: ethernet@10204000 {
 		compatible = "snps,arc-emac";
 		reg = <0x10204000 0x3c>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		rockchip,grf = <&grf>;
 
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

             reply	other threads:[~2023-12-20 10:34 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-20 10:33 Andy Yan [this message]
2023-12-20 11:58 ` [PATCH] Revert "ARM: dts: rockchip: restyle emac nodes" Johan Jonker
2023-12-21  8:28   ` Andy Yan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231220103334.2665543-1-andyshrk@163.com \
    --to=andyshrk@163.com \
    --cc=andy.yan@rock-chips.com \
    --cc=david.wu@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=jbx6244@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox