Hi Jonas, On Wed, Oct 23, 2024 at 12:49 AM Jonas Karlman wrote: > > Hi Tianling, > > On 2024-10-20 19:39, Tianling Shen wrote: > > The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps > > Ethernet ports designed and developed by FriendlyElec for IoT > > applications. > > > > Specification: > > - Rockchip RK3566 > > - 2GB LPDDR4X RAM > > - optional 32GB eMMC module > > - SD card slot > > - 2x 1000 Base-T > > - 3x LEDs (POWER, LAN, WAN) > > - 2x Buttons (Reset, MaskROM) > > - 1x USB 3.0 Port > > - Type-C 5V 2A Power > > > > Signed-off-by: Tianling Shen > > --- > >  arch/arm64/boot/dts/rockchip/Makefile         |   1 + > >  .../boot/dts/rockchip/rk3566-nanopi-r3s.dts   | 554 ++++++++++++++++++ > >  2 files changed, 555 insertions(+) > >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts > > > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > > index 8e1025cb5d20..e641033d23d1 100644 > > --- a/arch/arm64/boot/dts/rockchip/Makefile > > +++ b/arch/arm64/boot/dts/rockchip/Makefile > > @@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb > > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb > >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts > > new file mode 100644 > > index 000000000000..951dd9bcb4b0 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/rockchip/rk3566-nanopi-r3s.dts > > @@ -0,0 +1,554 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > > +/* > > + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. > > + * > > + * Copyright (c) 2024 FriendlyElec Computer Tech. Co., Ltd. > > + * (http://www.friendlyarm.com/ > > + * > > + * Copyright (c) 2024 Tianling Shen > > + */ > > + > > +/dts-v1/; > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include "rk3566.dtsi" > > + > > +/ { > > +     model = "FriendlyARM NanoPi R3S"; > > Please use the marketing name, and the name added in binding: > >    FriendlyElec NanoPi R3S Sorry for the copy & paste error, will fix it in new patch. > > > +     compatible = "friendlyarm,nanopi-r3s", "rockchip,rk3566"; > > + > > +     aliases { > > +             ethernet0 = &gmac1; > > +             mmc0 = &sdmmc0; > > +             mmc1 = &sdhci; > > This board comes with on-board eMMC this please use mmc0 as alias for > &sdhci; and mmc1 for sd-card. Is using mmc0 for sdhci a common practice for eMMC boards? The eMMC module on R3S is optional and users may get boards without it. > > > +     }; > > + > > +     chosen: chosen { > > +             stdout-path = "serial2:1500000n8"; > > +     }; > > + > > +     gpio-keys { > > +             compatible = "gpio-keys"; > > +             pinctrl-names = "default"; > > +             pinctrl-0 = <&reset_button_pin>; > > + > > +             button-reset { > > +                     label = "reset"; > > +                     gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; > > +                     linux,code = ; > > +                     debounce-interval = <50>; > > +             }; > > +     }; > > + > > +     gpio-leds { > > +             compatible = "gpio-leds"; > > +             pinctrl-names = "default"; > > +             pinctrl-0 = <&power_led_pin>, <&lan_led_pin>, <&wan_led_pin>; > > + > > +             power_led: led-0 { > > +                     color = ; > > +                     function = LED_FUNCTION_POWER; > > +                     gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > > +                     default-state = "on"; > > +             }; > > + > > +             lan_led: led-1 { > > +                     color = ; > > +                     function = LED_FUNCTION_LAN; > > +                     gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; > > +             }; > > + > > +             wan_led: led-2 { > > +                     color = ; > > +                     function = LED_FUNCTION_WAN; > > +                     gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>; > > +             }; > > +     }; > > + > > +     vdd_usbc: vdd-usbc-regulator { > > +             compatible = "regulator-fixed"; > > +             regulator-name = "vdd_usbc"; > > +             regulator-always-on; > > +             regulator-boot-on; > > +             regulator-min-microvolt = <5000000>; > > +             regulator-max-microvolt = <5000000>; > > +     }; > > + > > +     vcc5v0_sys: vcc5v0-sys-regulator { > > This and other fixed regulators does not match the recommended naming > pattern: ^regulator-(.*)$, please rename fixed regulator nodes. Soory I missed the dt-binding update, also thanks Heiko for renaming the regulator nodes. > > > +             compatible = "regulator-fixed"; > > +             regulator-name = "vcc5v0_sys"; > > +             regulator-always-on; > > +             regulator-boot-on; > > +             regulator-min-microvolt = <5000000>; > > +             regulator-max-microvolt = <5000000>; > > +             vin-supply = <&vdd_usbc>; > > +     }; > > + > > +     vcc3v3_sys: vcc3v3-sys-regulator { > > +             compatible = "regulator-fixed"; > > +             regulator-name = "vcc3v3_sys"; > > +             regulator-always-on; > > +             regulator-boot-on; > > +             regulator-min-microvolt = <3300000>; > > +             regulator-max-microvolt = <3300000>; > > +             vin-supply = <&vcc5v0_sys>; > > +     }; > > + > > +     vcc5v0_usb: vcc5v0_usb-regulator { > > +             compatible = "regulator-fixed"; > > +             enable-active-high; > > +             gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; > > +             pinctrl-names = "default"; > > +             pinctrl-0 = <&vcc5v0_usb_host_en>; > > +             regulator-name = "vcc5v0_usb"; > > +             regulator-always-on; > > +             regulator-boot-on; > > +             regulator-min-microvolt = <5000000>; > > +             regulator-max-microvolt = <5000000>; > > +             vin-supply = <&vcc5v0_sys>; > > +     }; > > +}; > > + > > +&combphy1 { > > +     status = "okay"; > > +}; > > + > > +&combphy2 { > > +     status = "okay"; > > +}; > > + > > +&cpu0 { > > +     cpu-supply = <&vdd_cpu>; > > +}; > > + > > +&cpu1 { > > +     cpu-supply = <&vdd_cpu>; > > +}; > > + > > +&cpu2 { > > +     cpu-supply = <&vdd_cpu>; > > +}; > > + > > +&cpu3 { > > +     cpu-supply = <&vdd_cpu>; > > +}; > > + > > +&gmac1 { > > +     assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; > > +     assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; > > +     assigned-clock-rates = <0>, <125000000>; > > +     clock_in_out = "output"; > > +     phy-mode = "rgmii-id"; > > +     phy-handle = <&rgmii_phy1>; > > +     pinctrl-names = "default"; > > +     pinctrl-0 = <&gmac1m0_miim > > +                  &gmac1m0_tx_bus2_level3 > > +                  &gmac1m0_rx_bus2 > > +                  &gmac1m0_rgmii_clk_level2 > > +                  &gmac1m0_rgmii_bus_level3>; > > +     snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; > > +     snps,reset-active-low; > > +     /* Reset time is 20ms, 100ms for rtl8211f */ > > +     snps,reset-delays-us = <0 20000 100000>; > > These snps,reset props is deprecated, please add reset props to the > Ethernet PHY node. Will fix it in new patch. > > > +     status = "okay"; > > +}; > > + > > +&gpu { > > +     mali-supply = <&vdd_gpu>; > > +     status = "okay"; > > +}; > > + > > +&i2c0 { > > +     status = "okay"; > > + > > +     vdd_cpu: regulator@1c { > > +             compatible = "tcs,tcs4525"; > > +             reg = <0x1c>; > > +             fcs,suspend-voltage-selector = <1>; > > +             regulator-name = "vdd_cpu"; > > +             regulator-always-on; > > +             regulator-boot-on; > > +             regulator-min-microvolt = <800000>; > > +             regulator-max-microvolt = <1150000>; > > +             regulator-ramp-delay = <2300>; > > +             vin-supply = <&vcc5v0_sys>; > > + > > +             regulator-state-mem { > > +                     regulator-off-in-suspend; > > +             }; > > +     }; > > + > > +     rk809: pmic@20 { > > +             compatible = "rockchip,rk809"; > > +             reg = <0x20>; > > +             interrupt-parent = <&gpio0>; > > +             interrupts = ; > > +             #clock-cells = <1>; > > +             pinctrl-names = "default"; > > +             pinctrl-0 = <&pmic_int>; > > +             system-power-controller; > > +             vcc1-supply = <&vcc3v3_sys>; > > +             vcc2-supply = <&vcc3v3_sys>; > > +             vcc3-supply = <&vcc3v3_sys>; > > +             vcc4-supply = <&vcc3v3_sys>; > > +             vcc5-supply = <&vcc3v3_sys>; > > +             vcc6-supply = <&vcc3v3_sys>; > > +             vcc7-supply = <&vcc3v3_sys>; > > +             vcc8-supply = <&vcc3v3_sys>; > > +             vcc9-supply = <&vcc3v3_sys>; > > +             wakeup-source; > > + > > +             regulators { > > +                     vdd_logic: DCDC_REG1 { > > +                             regulator-name = "vdd_logic"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-initial-mode = <0x2>; > > +                             regulator-min-microvolt = <500000>; > > +                             regulator-max-microvolt = <1350000>; > > +                             regulator-ramp-delay = <6001>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vdd_gpu: DCDC_REG2 { > > +                             regulator-name = "vdd_gpu"; > > +                             regulator-always-on; > > +                             regulator-initial-mode = <0x2>; > > +                             regulator-min-microvolt = <500000>; > > +                             regulator-max-microvolt = <1350000>; > > +                             regulator-ramp-delay = <6001>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vcc_ddr: DCDC_REG3 { > > +                             regulator-name = "vcc_ddr"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-initial-mode = <0x2>; > > + > > +                             regulator-state-mem { > > +                                     regulator-on-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vdd_npu: DCDC_REG4 { > > +                             regulator-name = "vdd_npu"; > > +                             regulator-initial-mode = <0x2>; > > +                             regulator-min-microvolt = <500000>; > > +                             regulator-max-microvolt = <1350000>; > > +                             regulator-ramp-delay = <6001>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vcc_1v8: DCDC_REG5 { > > +                             regulator-name = "vcc_1v8"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-min-microvolt = <1800000>; > > +                             regulator-max-microvolt = <1800000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vdda0v9_image: LDO_REG1 { > > +                             regulator-name = "vdda0v9_image"; > > +                             regulator-min-microvolt = <950000>; > > +                             regulator-max-microvolt = <950000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vdda_0v9: LDO_REG2 { > > +                             regulator-name = "vdda_0v9"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-min-microvolt = <900000>; > > +                             regulator-max-microvolt = <900000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vdda0v9_pmu: LDO_REG3 { > > +                             regulator-name = "vdda0v9_pmu"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-min-microvolt = <900000>; > > +                             regulator-max-microvolt = <900000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-on-in-suspend; > > +                                     regulator-suspend-microvolt = <900000>; > > +                             }; > > +                     }; > > + > > +                     vccio_acodec: LDO_REG4 { > > +                             regulator-name = "vccio_acodec"; > > +                             regulator-min-microvolt = <3300000>; > > +                             regulator-max-microvolt = <3300000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vccio_sd: LDO_REG5 { > > +                             regulator-name = "vccio_sd"; > > +                             regulator-min-microvolt = <1800000>; > > +                             regulator-max-microvolt = <3300000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vcc3v3_pmu: LDO_REG6 { > > +                             regulator-name = "vcc3v3_pmu"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-min-microvolt = <3300000>; > > +                             regulator-max-microvolt = <3300000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-on-in-suspend; > > +                                     regulator-suspend-microvolt = <3300000>; > > +                             }; > > +                     }; > > + > > +                     vcca_1v8: LDO_REG7 { > > +                             regulator-name = "vcca_1v8"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-min-microvolt = <1800000>; > > +                             regulator-max-microvolt = <1800000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vcca1v8_pmu: LDO_REG8 { > > +                             regulator-name = "vcca1v8_pmu"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > +                             regulator-min-microvolt = <1800000>; > > +                             regulator-max-microvolt = <1800000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-on-in-suspend; > > +                                     regulator-suspend-microvolt = <1800000>; > > +                             }; > > +                     }; > > + > > +                     vcca1v8_image: LDO_REG9 { > > +                             regulator-name = "vcca1v8_image"; > > +                             regulator-min-microvolt = <1800000>; > > +                             regulator-max-microvolt = <1800000>; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vcc_3v3: SWITCH_REG1 { > > +                             regulator-name = "vcc_3v3"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > + > > +                     vcc3v3_sd: SWITCH_REG2 { > > +                             regulator-name = "vcc3v3_sd"; > > +                             regulator-always-on; > > +                             regulator-boot-on; > > + > > +                             regulator-state-mem { > > +                                     regulator-off-in-suspend; > > +                             }; > > +                     }; > > +             }; > > +     }; > > +}; > > + > > +&i2c1 { > > +     status = "okay"; > > + > > +     hym8563: rtc@51 { > > +             compatible = "haoyu,hym8563"; > > +             reg = <0x51>; > > +             #clock-cells = <0>; > > +             clock-output-names = "hym8563"; > > +             pinctrl-names = "default"; > > +             pinctrl-0 = <&hym8563_int>; > > +             interrupt-parent = <&gpio0>; > > +             interrupts = ; > > +             wakeup-source; > > +     }; > > +}; > > + > > +&mdio1 { > > +     rgmii_phy1: ethernet-phy@1 { > > +             compatible = "ethernet-phy-ieee802.3-c22"; > > +             reg = <1>; > > +             interrupt-parent = <&gpio4>; > > +             interrupts = ; > > +             pinctrl-names = "default"; > > +             pinctrl-0 = <ð_phy_reset_pin>; > > Please add the reset props here. > > > +     }; > > +}; > > + > > +&pcie2x1 { > > +     pinctrl-names = "default"; > > +     pinctrl-0 = <&pcie_reset_h>; > > +     reset-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; > > +     status = "okay"; > > +}; > > + > > +&pinctrl { > > +     gpio-leds { > > +             lan_led_pin: lan-led-pin { > > +                     rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; > > +             }; > > + > > +             power_led_pin: power-led-pin { > > +                     rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > > +             }; > > + > > +             wan_led_pin: wan-led-pin { > > +                     rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; > > +             }; > > +     }; > > + > > +     gmac { > > +             eth_phy_reset_pin: eth-phy-reset-pin { > > +                     rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; > > +             }; > > +     }; > > + > > +     pcie { > > +             pcie_reset_h: pcie-reset-h { > > +                     rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; > > +             }; > > +     }; > > + > > +     pmic { > > +             pmic_int: pmic-int { > > +                     rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > > +             }; > > +     }; > > + > > +     rockchip-key { > > +             reset_button_pin: reset-button-pin { > > +                     rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; > > +             }; > > +     }; > > + > > +     rtc { > > +             hym8563_int: hym8563-int { > > +                     rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; > > +             }; > > +     }; > > + > > +     usb { > > +             vcc5v0_usb_host_en: vcc5v0-usb-host-en { > > +                     rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; > > +             }; > > +     }; > > +}; > > + > > +&pmu_io_domains { > > +     status = "okay"; > > The status prop is typically the last prop. Will fix it in new patch. > > > +     pmuio1-supply = <&vcc3v3_pmu>; > > +     pmuio2-supply = <&vcc3v3_pmu>; > > +     vccio1-supply = <&vccio_acodec>; > > +     vccio2-supply = <&vcc_1v8>; > > +     vccio3-supply = <&vccio_sd>; > > +     vccio4-supply = <&vcc_3v3>; > > +     vccio5-supply = <&vcc_1v8>; > > +     vccio6-supply = <&vcc_3v3>; > > +     vccio7-supply = <&vcc_3v3>; > > +}; > > + > > +&sdhci { > > +     bus-width = <8>; > > +     max-frequency = <200000000>; > > +     non-removable; > > Please add the hs200 prop here, or we will need to add is in U-Boot to > be able to boot from eMMC. Thanks for the hint, will fix it in new patch. Thanks, Tianling. > > Regards, > Jonas > > > +     pinctrl-names = "default"; > > +     pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>; > > +     status = "okay"; > > +}; > > + > > +&sdmmc0 { > > +     bus-width = <4>; > > +     cap-mmc-highspeed; > > +     cap-sd-highspeed; > > +     disable-wp; > > +     no-sdio; > > +     no-mmc; > > +     pinctrl-names = "default"; > > +     pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; > > +     sd-uhs-sdr50; > > +     vmmc-supply = <&vcc3v3_sd>; > > +     vqmmc-supply = <&vccio_sd>; > > +     status = "okay"; > > +}; > > + > > +&tsadc { > > +     status = "okay"; > > +}; > > + > > +&uart2 { > > +     status = "okay"; > > +}; > > + > > +&usb2phy0 { > > +     status = "okay"; > > +}; > > + > > +&usb2phy0_host { > > +     phy-supply = <&vcc5v0_usb>; > > +     status = "okay"; > > +}; > > + > > +&usb2phy0_otg { > > +     status = "okay"; > > +}; > > + > > +&usb_host0_xhci { > > +     extcon = <&usb2phy0>; > > +     status = "okay"; > > +}; > > + > > +&usb_host1_xhci { > > +     status = "okay"; > > +}; > > + > > +&vop { > > +     assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; > > +     assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; > > +     status = "okay"; > > +}; > > + > > +&vop_mmu { > > +     status = "okay"; > > +}; >