public inbox for linux-rockchip@lists.infradead.org
 help / color / mirror / Atom feed
From: Frank Wang <frawang.cn@gmail.com>
To: heiko@sntech.de, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	william.wu@rock-chips.com, yubing.zhang@rock-chips.com,
	tim.chen@rock-chips.com, kever.yang@rock-chips.com,
	Frank Wang <frank.wang@rock-chips.com>
Subject: [PATCH] arm64: dts: rockchip: add usb related nodes for rk3576
Date: Tue, 10 Dec 2024 16:50:53 +0800	[thread overview]
Message-ID: <20241210085053.64294-1-frawang.cn@gmail.com> (raw)

From: Frank Wang <frank.wang@rock-chips.com>

This adds USB and USB-PHY related nodes for RK3576 SoC.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
The compatible string "rockchip,rk3576-naneng-combphy" in the patch
depends on the following commit which has not merged into this branch.
 - https://patchwork.kernel.org/project/linux-phy/patch/20241106021357.19782-1-frawang.cn@gmail.com/

 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 169 +++++++++++++++++++++++
 1 file changed, 169 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 436232ffe4d1..70cfa099089a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -445,6 +445,58 @@ soc {
 		#size-cells = <2>;
 		ranges;
 
+		usb_drd0_dwc3: usb@23000000 {
+			compatible = "rockchip,rk3576-dwc3", "snps,dwc3";
+			reg = <0x0 0x23000000 0x0 0x400000>;
+			clocks = <&cru CLK_REF_USB3OTG0>,
+				 <&cru CLK_SUSPEND_USB3OTG0>,
+				 <&cru ACLK_USB3OTG0>;
+			clock-names = "ref_clk", "suspend_clk", "bus_clk";
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_USB>;
+			resets = <&cru SRST_A_USB3OTG0>;
+			dr_mode = "otg";
+			phys = <&u2phy0_otg>, <&usbdp_phy PHY_TYPE_USB3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			snps,parkmode-disable-hs-quirk;
+			snps,parkmode-disable-ss-quirk;
+			status = "disabled";
+		};
+
+		usb_drd1_dwc3: usb@23400000 {
+			compatible = "rockchip,rk3576-dwc3", "snps,dwc3";
+			reg = <0x0 0x23400000 0x0 0x400000>;
+			clocks = <&cru CLK_REF_USB3OTG1>,
+				 <&cru CLK_SUSPEND_USB3OTG1>,
+				 <&cru ACLK_USB3OTG1>;
+			clock-names = "ref_clk", "suspend_clk", "bus_clk";
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3576_PD_PHP>;
+			resets = <&cru SRST_A_USB3OTG1>;
+			dr_mode = "otg";
+			phys = <&u2phy1_otg>, <&combphy1_psu PHY_TYPE_USB3>;
+			phy-names = "usb2-phy", "usb3-phy";
+			phy_type = "utmi_wide";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis-u2-freeclk-exists-quirk;
+			snps,dis-del-phy-power-chg-quirk;
+			snps,dis-tx-ipgap-linecheck-quirk;
+			snps,dis_rxdet_inp3_quirk;
+			snps,parkmode-disable-hs-quirk;
+			snps,parkmode-disable-ss-quirk;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		sys_grf: syscon@2600a000 {
 			compatible = "rockchip,rk3576-sys-grf", "syscon";
 			reg = <0x0 0x2600a000 0x0 0x2000>;
@@ -515,6 +567,65 @@ usbdpphy_grf: syscon@2602c000 {
 			reg = <0x0 0x2602c000 0x0 0x2000>;
 		};
 
+		usb2phy_grf: syscon@2602e000 {
+			compatible = "rockchip,rk3576-usb2phy-grf", "syscon", "simple-mfd";
+			reg = <0x0 0x2602e000 0x0 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			u2phy0: usb2-phy@0 {
+				compatible = "rockchip,rk3576-usb2phy";
+				reg = <0x0 0x10>;
+				resets = <&cru SRST_OTGPHY_0>, <&cru SRST_P_USBPHY_GRF_0>;
+				reset-names = "phy", "apb";
+				clocks = <&cru CLK_PHY_REF_SRC>,
+					 <&cru ACLK_MMU2>,
+					 <&cru ACLK_SLV_MMU2>;
+				clock-names = "phyclk", "aclk", "aclk_slv";
+				clock-output-names = "usb480m_phy0";
+				#clock-cells = <0>;
+				status = "disabled";
+
+				u2phy0_otg: otg-port {
+					#phy-cells = <0>;
+					interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "otg-bvalid", "otg-id", "linestate";
+					status = "disabled";
+				};
+			};
+
+			u2phy1: usb2-phy@2000 {
+				compatible = "rockchip,rk3576-usb2phy";
+				reg = <0x2000 0x10>;
+				resets = <&cru SRST_OTGPHY_1>, <&cru SRST_P_USBPHY_GRF_1>;
+				reset-names = "phy", "apb";
+				clocks = <&cru CLK_PHY_REF_SRC>,
+					 <&cru ACLK_MMU1>,
+					 <&cru ACLK_SLV_MMU1>;
+				clock-names = "phyclk", "aclk", "aclk_slv";
+				clock-output-names = "usb480m_phy1";
+				#clock-cells = <0>;
+				status = "disabled";
+
+				u2phy1_otg: otg-port {
+					#phy-cells = <0>;
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "otg-bvalid", "otg-id", "linestate";
+					status = "disabled";
+				};
+			};
+		};
+
+		vo1_grf: syscon@26036000 {
+			compatible = "rockchip,rk3576-vo1-grf", "syscon";
+			reg = <0x0 0x26036000 0x0 0x100>;
+			clocks = <&cru PCLK_VO1_ROOT>;
+		};
+
 		sdgmac_grf: syscon@26038000 {
 			compatible = "rockchip,rk3576-sdgmac-grf", "syscon";
 			reg = <0x0 0x26038000 0x0 0x1000>;
@@ -1587,6 +1698,64 @@ uart11: serial@2afd0000 {
 			status = "disabled";
 		};
 
+		usbdp_phy: phy@2b010000 {
+			compatible = "rockchip,rk3576-usbdp-phy";
+			reg = <0x0 0x2b010000 0x0 0x10000>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_PHY_REF_SRC >,
+				 <&cru CLK_USBDP_COMBO_PHY_IMMORTAL>,
+				 <&cru PCLK_USBDPPHY>,
+				 <&u2phy0>;
+			clock-names = "refclk", "immortal", "pclk", "utmi";
+			resets = <&cru SRST_USBDP_COMBO_PHY_INIT>,
+				 <&cru SRST_USBDP_COMBO_PHY_CMN>,
+				 <&cru SRST_USBDP_COMBO_PHY_LANE>,
+				 <&cru SRST_USBDP_COMBO_PHY_PCS>,
+				 <&cru SRST_P_USBDPPHY>;
+			reset-names = "init", "cmn", "lane", "pcs_apb", "pma_apb";
+			rockchip,u2phy-grf = <&usb2phy_grf>;
+			rockchip,usb-grf = <&usb_grf>;
+			rockchip,usbdpphy-grf = <&usbdpphy_grf>;
+			rockchip,vo-grf = <&vo1_grf>;
+			status = "disabled";
+		};
+
+		combphy0_ps: phy@2b050000 {
+			compatible = "rockchip,rk3576-naneng-combphy";
+			reg = <0x0 0x2b050000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_REF_PCIE0_PHY>,
+				 <&cru PCLK_PCIE2_COMBOPHY0>,
+				 <&cru PCLK_PCIE0>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_REF_PCIE0_PHY>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PCIE0_PIPE_PHY>,
+				 <&cru SRST_P_PCIE2_COMBOPHY0>;
+			reset-names = "phy", "apb";
+			rockchip,pipe-grf = <&php_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy0_grf>;
+			status = "disabled";
+		};
+
+		combphy1_psu: phy@2b060000 {
+			compatible = "rockchip,rk3576-naneng-combphy";
+			reg = <0x0 0x2b060000 0x0 0x100>;
+			#phy-cells = <1>;
+			clocks = <&cru CLK_REF_PCIE1_PHY>,
+				 <&cru PCLK_PCIE2_COMBOPHY1>,
+				 <&cru PCLK_PCIE1>;
+			clock-names = "ref", "apb", "pipe";
+			assigned-clocks = <&cru CLK_REF_PCIE1_PHY>;
+			assigned-clock-rates = <100000000>;
+			resets = <&cru SRST_PCIE1_PIPE_PHY>,
+				 <&cru SRST_P_PCIE2_COMBOPHY1>;
+			reset-names = "phy", "apb";
+			rockchip,pipe-grf = <&php_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
+			status = "disabled";
+		};
+
 		sram: sram@3ff88000 {
 			compatible = "mmio-sram";
 			reg = <0x0 0x3ff88000 0x0 0x78000>;
-- 
2.25.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

             reply	other threads:[~2024-12-10  8:52 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-10  8:50 Frank Wang [this message]
2025-01-09 15:29 ` [PATCH] arm64: dts: rockchip: add usb related nodes for rk3576 Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241210085053.64294-1-frawang.cn@gmail.com \
    --to=frawang.cn@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=frank.wang@rock-chips.com \
    --cc=heiko@sntech.de \
    --cc=kever.yang@rock-chips.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    --cc=tim.chen@rock-chips.com \
    --cc=william.wu@rock-chips.com \
    --cc=yubing.zhang@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox