[PATCH v7 0/3] Add HDMI audio on the rk3588 SoC

[Detlev Casanova <detlev.casanova@collabora.com>]

To support HDMI audio on the rk3588 based devices, the generic HDMI
Codec framework is used in the dw-hdmi-qp DRM bridge driver.

The implementation is mainly based on the downstream driver, ported to the
generic HDMI Codec framework [1] recently merged in the master branch.
The parameters computation has been kept as is and the data stored in the
dw_hdmi_qp struct as been cleaned up.

The table for the N values has been edited to reflect N recommended values
as well as CTS recommended values.

The downstream kernel also implements a machine driver for HDMI audio but
it is doing exactly what the simple-audio-card driver does, so use that
instead in the RK3588 SoC device tree.

This adds HDMI audio support for both HDMI TX ports.

*** Dependencies ***

Based on Linus' master branch, but also needs Cristian's dts patches for HDMI1
support [2], which depends on Heiko's patchset for
phy-rockchip-samsung-hdptx [3]. Patches will apply without [3], but HDMI will
not work (at all).

[1]: https://lore.kernel.org/all/20241224-drm-bridge-hdmi-connector-v10-0-dc89577cd438@linaro.org
[2]: https://lore.kernel.org/linux-rockchip/20241211-rk3588-hdmi1-v2-0-02cdca22ff68@collabora.com
[3]: https://lore.kernel.org/lkml/20241206103401.1780416-3-heiko@sntech.de/

Changes since v6:
 - Fix arguments alignement (checkpatch --strict warnings)
 - Add hdmi1 audio support too
 - Move hdmi0_sound node under hdmi0_out_con

Changes since v5:
 - Simplify audio math computation for N
 - Move hdmi0-sound node up with other address-less nodes

Changes since v4:
 - Moved hdmi0_audio node the rk3588-base.dtsi
 - Enable hdmi0_audio in rk3588-rock-5b.dts

Changes since v3:
 - Renamed function to start with dw_hdmi_qp

Changes since v2:
 - Also clear the audio infoframe
 - Write AUDI_CONTENTS0 to its default value in case it gets overwritten.
 - Store tmds_char_rate in the dw_hdmi_qp struct in atomic_enable
 - Clear tmds_char_rate in atomic_disable and only write registers when
   tmds_char_rate is not 0.
 - Do not use connector_state duplicates

Changes since v1:
 - Remove useless audio_mutex (was used downstream for multiple drivers access
   to audio functions)
 - Let hdmi_codec build and setup audio infoframes
 - Only access audio registers when connector is connected
 - Rebased on master branch

Detlev Casanova (2):
  arm64: dts: rockchip: Add HDMI audio outputs for rk3588 SoC
  arm64: dts: rockchip: Enable HDMI audio outputs for Rock 5B

Sugar Zhang (1):
  drm/bridge: synopsys: Add audio support for dw-hdmi-qp

 arch/arm64/boot/dts/rockchip/rk3588-base.dtsi |  17 +
 .../arm64/boot/dts/rockchip/rk3588-extra.dtsi |  17 +
 .../boot/dts/rockchip/rk3588-rock-5b.dts      |  16 +
 drivers/gpu/drm/bridge/synopsys/dw-hdmi-qp.c  | 489 ++++++++++++++++++
 4 files changed, 539 insertions(+)

-- 
2.48.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip