linux-rockchip.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Joseph Kogut <joseph.kogut@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	 Jimmy Hon <honyuenkwun@gmail.com>
Cc: Steve deRosier <derosier@cal-sierra.com>,
	devicetree@vger.kernel.org,  linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	 Joseph Kogut <joseph.kogut@gmail.com>
Subject: [PATCH v5 2/3] arm64: dts: rockchip: Add rk3588 based Radxa CM5
Date: Tue, 17 Jun 2025 15:12:00 -0700	[thread overview]
Message-ID: <20250617-rk3588s-cm5-io-dts-upstream-v5-2-8d96854a5bbd@gmail.com> (raw)
In-Reply-To: <20250617-rk3588s-cm5-io-dts-upstream-v5-0-8d96854a5bbd@gmail.com>

Add initial support for the Radxa Compute Module 5 (CM5). The CM5 uses a
proprietary connector.

Specification:
- Rockchip RK3588
- Up to 32 GB LPDDR4X
- Up to 128 GB eMMC
- 1x HDMI TX up to 8k@60 hz
- 1x eDP TX up to 4k@60 hz
- Gigabit Ethernet PHY

Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
---
 .../arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi | 135 +++++++++++++++++++++
 1 file changed, 135 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..6410ea5255dc783e5d24677853ccf1c78008e834
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Joseph Kogut <joseph.kogut@gmail.com>
+ */
+
+/*
+ * CM5 data sheet
+ * https://dl.radxa.com/cm5/v2210/radxa_cm5_v2210_schematic.pdf
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+
+/ {
+	compatible = "radxa,cm5", "rockchip,rk3588s";
+
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_sys: led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8602";
+		reg = <0x43>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+	};
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&sdhci {
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+

-- 
2.50.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2025-06-17 22:12 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-17 22:11 [PATCH v5 0/3] Add Radxa CM5 module and IO board dts Joseph Kogut
2025-06-17 22:11 ` [PATCH v5 1/3] dt-bindings: arm: rockchip: Add Radxa CM5 IO board Joseph Kogut
2025-06-17 22:12 ` Joseph Kogut [this message]
2025-08-07 11:47   ` [PATCH v5 2/3] arm64: dts: rockchip: Add rk3588 based Radxa CM5 FUKAUMI Naoki
2025-08-07 13:26   ` FUKAUMI Naoki
2025-06-17 22:12 ` [PATCH v5 3/3] arm64: dts: rockchip: Add support for CM5 IO carrier Joseph Kogut
2025-06-18  1:59   ` Jimmy Hon
2025-06-18 17:51     ` Joseph Kogut
2025-07-11 23:09   ` Dmitriy Filchenko
2025-08-07 13:20   ` FUKAUMI Naoki
2025-09-03  8:28 ` [PATCH v5 0/3] Add Radxa CM5 module and IO board dts FUKAUMI Naoki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250617-rk3588s-cm5-io-dts-upstream-v5-2-8d96854a5bbd@gmail.com \
    --to=joseph.kogut@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=derosier@cal-sierra.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=honyuenkwun@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).