[PATCH v2 0/2] Add RK3588 Tiger DisplayPort carrier

[PATCH v2 0/2] Add RK3588 Tiger DisplayPort carrier

[Heiko Stuebner]

A board that allows easy testing of the Analogix eDP controller on the
RK3588. Requires Damon's recent work on allowing bridges in the
Rockchip variant of the controller driver [0].

changes in v2:
- collect Ack/Review for binding
- address Quentin's comments
  - sorting in Makefile and dp-connector properties
  - ethernet alias
  - drop data-lanes comment

[0] https://lore.kernel.org/dri-devel/20250709070139.3130635-1-damon.ding@rock-chips.com/

Heiko Stuebner (2):
  dt-bindings: arm: rockchip: add RK3588 DP carrier from Theobroma
    Systems
  arm64: dts: rockchip: add RK3588 DP carrier from Theobroma Systems

 .../devicetree/bindings/arm/rockchip.yaml     |   6 +-
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../rk3588-tiger-displayport-carrier.dts      | 109 ++++++++++++++++++
 3 files changed, 114 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts

-- 
2.47.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 1/2] dt-bindings: arm: rockchip: add RK3588 DP carrier from Theobroma Systems

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@cherry.de>

The DisplayPort carrier is a very simple baseboard only providing serial,
ethernet and a displayport output.

But its main functionality is that it routes the Analogix eDP controller
to this DisplayPort output, which allows to test that controller simply
by hooking it up to a suitable monitor.

Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5772d905f390..8dc83263c892 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -1164,9 +1164,11 @@ properties:
           - const: tsd,rk3588-jaguar
           - const: rockchip,rk3588
 
-      - description: Theobroma Systems RK3588-Q7 with Haikou baseboard
+      - description: Theobroma Systems RK3588-Q7 with baseboards
         items:
-          - const: tsd,rk3588-tiger-haikou
+          - enum:
+              - tsd,rk3588-tiger-displayport-carrier
+              - tsd,rk3588-tiger-haikou
           - const: tsd,rk3588-tiger
           - const: rockchip,rk3588
 
-- 
2.47.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 2/2] arm64: dts: rockchip: add RK3588 DP carrier from Theobroma Systems

[Heiko Stuebner]

From: Heiko Stuebner <heiko.stuebner@cherry.de>

The DisplayPort carrier is a very simple baseboard only providing serial,
ethernet and a displayport output.

But its main functionality is that it routes the Analogix eDP controller
to this DisplayPort output, which allows to test that controller simply
by hooking it up to a suitable monitor.

The Analogix-DP controller supports eDP 1.3 and DP 1.2, so can drive
both eDP displays as well as full DP monitors. It does not support DP+
so passive DP-to-HDMI adapters won't work.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../rk3588-tiger-displayport-carrier.dts      | 109 ++++++++++++++++++
 2 files changed, 110 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 7946bec10670..a1acde3c23fa 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -176,6 +176,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-dsi1-fhd10.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-srns.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-displayport-carrier.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-tiger-haikou-video-demo.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-toybrick-x0.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts b/arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts
new file mode 100644
index 000000000000..025b2853c708
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger-displayport-carrier.dts
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Cherry Embedded Solutions GmbH
+ */
+
+/dts-v1/;
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3588-tiger.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3588-Q7 SoM on Tiger Displayport Carrier v1";
+	compatible = "tsd,rk3588-tiger-displayport-carrier", "tsd,rk3588-tiger", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	dp-connector {
+		compatible = "dp-connector";
+		dp-pwr-supply = <&vcc3v3_baseboard>;
+		/* Q7_DP_HPD# but Q7_HDMI_HPD# could be used too */
+		hpd-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+		label = "dp0";
+		pinctrl-0 = <&edp0_hpd_l>;
+		pinctrl-names = "default";
+		type = "full-size";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&edp0_out_con>;
+			};
+		};
+	};
+
+	vcc3v3_baseboard: regulator-vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vcc5v0_baseboard: regulator-vcc5v0-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&edp0 {
+	status = "okay";
+};
+
+&edp0_in {
+	edp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_edp0>;
+	};
+};
+
+&edp0_out {
+	edp0_out_con: endpoint {
+		remote-endpoint = <&dp_con_in>;
+	};
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&pinctrl {
+	edp0 {
+		edp0_hpd_l: edp0-hpd-l-pin {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m2_xfer>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp2 {
+	vp2_out_edp0: endpoint@ROCKCHIP_VOP2_EP_EDP0 {
+		reg = <ROCKCHIP_VOP2_EP_EDP0>;
+		remote-endpoint = <&edp0_in_vp2>;
+	};
+};
-- 
2.47.2


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v2 2/2] arm64: dts: rockchip: add RK3588 DP carrier from Theobroma Systems

[Quentin Schulz]

Hi Heiko,

On 7/23/25 9:09 PM, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner@cherry.de>
> 
> The DisplayPort carrier is a very simple baseboard only providing serial,
> ethernet and a displayport output.
> 
> But its main functionality is that it routes the Analogix eDP controller
> to this DisplayPort output, which allows to test that controller simply
> by hooking it up to a suitable monitor.
> 
> The Analogix-DP controller supports eDP 1.3 and DP 1.2, so can drive
> both eDP displays as well as full DP monitors. It does not support DP+
> so passive DP-to-HDMI adapters won't work.
> 

I tested this on master (2942242dde896) + v2 of the eDP driver as listed 
in the cover letter, or with v3 of the eDP driver + 
48f05c3b4b701ae7687fd44d462c88b7ac67e952 and in both cases I have weird 
behaviors.

First, `reboot` is stuck for a very long time before actually rebooting. 
I think you have a stacktrace when you tried yourself, I don't so cannot 
send one.

Also, I tested on two different DP displays, one has a green tint, the 
other one purple. When trying out other resolutions with modetest, the 
kernel would often crash (no trace, just nothing on console, SSH dead). 
Note that the same HW setup with downstream kernel from 
https://git.theobroma-systems.com/tiger-linux.git/log/?h=linux-6.1-stan-rkr3.2-tiger 
works just fine. I would assume this has nothing to do with this Device 
Tree patch here but rather the eDP patches missing some bits maybe?

@Damon do you have some idea?

The display with green tint is a Iiyama ProLite XU2294HSU and the one 
with the purple tint is a Dell P2319H if that helps.

modetest output: https://paste.debian.net/1387797/.
modetest output with downstream kernel: https://paste.debian.net/1387798/

The Device Tree looks good to me otherwise.

Cheers,
Quentin

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v2 2/2] arm64: dts: rockchip: add RK3588 DP carrier from Theobroma Systems

[Heiko Stübner]

Am Freitag, 25. Juli 2025, 14:29:12 Mitteleuropäische Sommerzeit schrieb Quentin Schulz:
> Hi Heiko,
> 
> On 7/23/25 9:09 PM, Heiko Stuebner wrote:
> > From: Heiko Stuebner <heiko.stuebner@cherry.de>
> > 
> > The DisplayPort carrier is a very simple baseboard only providing serial,
> > ethernet and a displayport output.
> > 
> > But its main functionality is that it routes the Analogix eDP controller
> > to this DisplayPort output, which allows to test that controller simply
> > by hooking it up to a suitable monitor.
> > 
> > The Analogix-DP controller supports eDP 1.3 and DP 1.2, so can drive
> > both eDP displays as well as full DP monitors. It does not support DP+
> > so passive DP-to-HDMI adapters won't work.
> > 
> 
> I tested this on master (2942242dde896) + v2 of the eDP driver as listed 
> in the cover letter, or with v3 of the eDP driver + 
> 48f05c3b4b701ae7687fd44d462c88b7ac67e952 and in both cases I have weird 
> behaviors.
> 
> First, `reboot` is stuck for a very long time before actually rebooting. 
> I think you have a stacktrace when you tried yourself, I don't so cannot 
> send one.

I tracked this down last week. The hang is easily reproduceable and the
fault of the PCIe SMMU. See
  https://lore.kernel.org/all/4400329.mogB4TqSGs@diego/
for the full detail.

TL;DR is, SMMU without users (and thus clocks/power-domains/or whatever)
hangs on reboot.


> Also, I tested on two different DP displays, one has a green tint, the 
> other one purple. When trying out other resolutions with modetest, the 
> kernel would often crash (no trace, just nothing on console, SSH dead). 
> Note that the same HW setup with downstream kernel from 
> https://git.theobroma-systems.com/tiger-linux.git/log/?h=linux-6.1-stan-rkr3.2-tiger 
> works just fine. I would assume this has nothing to do with this Device 
> Tree patch here but rather the eDP patches missing some bits maybe?
> 
> @Damon do you have some idea?
> 
> The display with green tint is a Iiyama ProLite XU2294HSU and the one 
> with the purple tint is a Dell P2319H if that helps.
> 
> modetest output: https://paste.debian.net/1387797/.
> modetest output with downstream kernel: https://paste.debian.net/1387798/
> 
> The Device Tree looks good to me otherwise.
> 
> Cheers,
> Quentin
> 





_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip