[PATCH v2 0/2] Add support for 100ASK DShanPi A1

[PATCH v2 0/2] Add support for 100ASK DShanPi A1

[Hsun Lai]

This series add support for 100ASK DShanPi A1.

Info of device can be found at:
https://wiki.dshanpi.org/en/docs/DshanPi-A1/intro/

Changes in v2:
- Delete the pwm include file (Chukun Pan, v1)
- Fix vcc3v3_pcie gpios (Chukun Pan, v1)
- Adjust the order of some nodes (Chukun Pan, v1)
- Fix sdmmc (Chukun Pan, v1)
- Add phy-supply for u2phy0_otg (Chukun Pan, v1)

Changes in v1:
- Add support for 100ASK DShanPi A1

Hsun Lai (2):
  dt-bindings: arm: rockchip: Add 100ASK DShanPi A1
  arm64: dts: rockchip: add DTs for 100ASK DShanPi A1

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3576-100ask-dshanpi-a1.dts | 838 ++++++++++++++++++
 3 files changed, 844 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts

-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 1/2] dt-bindings: arm: rockchip: Add 100ASK DShanPi A1

[Hsun Lai]

This documents 100ASK DShanPi A1 which is a SBC based on RK3576 SoC.

Link: https://wiki.dshanpi.org/en/docs/DshanPi-A1/intro/

Signed-off-by: Hsun Lai <i@chainsx.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---

(no changes since v1)

 Documentation/devicetree/bindings/arm/rockchip.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 28db6bd6a..033730861 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -15,6 +15,11 @@ properties:
   compatible:
     oneOf:
 
+      - description: 100ASK DshanPi A1 board
+        items:
+          - const: 100ask,dshanpi-a1
+          - const: rockchip,rk3576
+
       - description: 96boards RK3399 Ficus (ROCK960 Enterprise Edition)
         items:
           - const: vamrs,ficus
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

[PATCH v2 2/2] arm64: dts: rockchip: add DTs for 100ASK DShanPi A1

[Hsun Lai]

Add device tree for 100ASK DShanPi A1 with Rockchip RK3576 SoC
(4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables
basic booting and connectivity.

Link: https://wiki.dshanpi.org/en/docs/DshanPi-A1/intro/

The device contains the following hardware that is tested/working:
 - 32 or 64GB eMMC
 - SDMMC card slot
 - M.2 WiFi slot
 - 4 or 8GB of RAM
 - 2x 1Gbps Ethernet
 - 2x USB 3.2 Gen 1 Type-A ports
 - USB 3.0 port
 - HDMI port
 - RTC with HYM8563TS

Signed-off-by: Hsun Lai <i@chainsx.cn>

---

Changes in v2:
- Delete the pwm include file (Chukun Pan, v1)
- Fix vcc3v3_pcie gpios (Chukun Pan, v1)
- Adjust the order of some nodes (Chukun Pan, v1)
- Fix sdmmc (Chukun Pan, v1)
- Add phy-supply for u2phy0_otg (Chukun Pan, v1)

Changes in v1:
- Add support for 100ASK DShanPi A1

 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3576-100ask-dshanpi-a1.dts | 838 ++++++++++++++++++
 2 files changed, 839 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 099520962..2a8a8f263 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -144,6 +144,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-100ask-dshanpi-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts
new file mode 100644
index 000000000..4c4e17d2f
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Rockchip Electronics Co., Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3576.dtsi"
+
+/ {
+	model = "100ASK DshanPi A1 board";
+	compatible = "100ask,dshanpi-a1", "rockchip,rk3576";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	es8388_sound: es8388-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "On-board Analog ES8388";
+		simple-audio-card,widgets = "Microphone", "Headphone Mic",
+					    "Microphone", "Mic Pads",
+					    "Headphone", "Headphone",
+					    "Line Out", "Line Out";
+		simple-audio-card,routing = "Headphone", "LOUT1",
+					    "Headphone", "ROUT1",
+					    "Line Out", "LOUT2",
+					    "Line Out", "ROUT2",
+					    "RINPUT1", "Headphone Mic",
+					    "LINPUT2", "Mic Pads",
+					    "RINPUT2", "Mic Pads";
+		simple-audio-card,pin-switches = "Headphone", "Line Out";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	vcc_12v0_dcin: regulator-vcc-12v0-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_12v0_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v2_ufs_vccq_s0: regulator-vcc-1v2-ufs-vccq-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v2_ufs_vccq_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_1v8_s0: regulator-vcc-1v8-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_1v8_ufs_vccq2_s0: regulator-vcc-1v8-ufs-vccq2-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8_ufs_vccq2_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_2v0_pldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <2000000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc3v3_pcie: regulator-vcc3v3-pcie {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwren_h>;
+		regulator-name = "vcc3v3_pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <5000>;
+		vin-supply = <&vcc_12v0_dcin>;
+	};
+
+	vcc_3v3_rtc_s5: regulator-vcc-3v3-rtc-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_rtc_s5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+
+	vcc_3v3_s0: regulator-vcc-3v3-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc_5v0_sys: regulator-vcc-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_12v0_dcin>;
+	};
+
+	vcc_5v0_device: regulator-vcc-5v0-device {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0_device";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_12v0_dcin>;
+	};
+
+	vcc_5v0_typec0: regulator-vcc-5v0-typec0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg0_pwren>;
+		regulator-name = "vcc_5v0_typec0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0_device>;
+	};
+
+	vcc_5v0_usbhost: regulator-vcc-5v0-usbhost {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_pwren>;
+		regulator-name = "vcc_5v0_usbhost";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_5v0_device>;
+	};
+
+	vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_ufs_s0";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth0m0_miim
+		     &eth0m0_tx_bus2
+		     &eth0m0_rx_bus2
+		     &eth0m0_rgmii_clk
+		     &eth0m0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth1m0_miim
+		     &eth1m0_tx_bus2
+		     &eth1m0_rx_bus2
+		     &eth1m0_rgmii_clk
+		     &eth1m0_rgmii_bus
+		     &ethm0_clk1_25m_out>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins
+			     &rk806_dvs1_null
+			     &rk806_dvs2_null
+			     &rk806_dvs3_null>;
+		system-power-controller;
+		vcc1-supply = <&vcc_5v0_sys>;
+		vcc2-supply = <&vcc_5v0_sys>;
+		vcc3-supply = <&vcc_5v0_sys>;
+		vcc4-supply = <&vcc_5v0_sys>;
+		vcc5-supply = <&vcc_5v0_sys>;
+		vcc6-supply = <&vcc_5v0_sys>;
+		vcc7-supply = <&vcc_5v0_sys>;
+		vcc8-supply = <&vcc_5v0_sys>;
+		vcc9-supply = <&vcc_5v0_sys>;
+		vcc10-supply = <&vcc_5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_npu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-enable-ramp-delay = <400>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <837500>;
+				regulator-max-microvolt = <837500>;
+				regulator-name = "vdda0v75_hdmi_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+		#clock-cells = <0>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	es8388: audio-codec@10 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x10>;
+		clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		AVDD-supply = <&vcca_3v3_s0>;
+		DVDD-supply = <&vcc_3v3_s0>;
+		HPVDD-supply = <&vcca_3v3_s0>;
+		PVDD-supply = <&vcc_3v3_s0>;
+		assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		assigned-clock-rates = <12288000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sai1m0_mclk>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&mdio0 {
+	rgmii_phy0: phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	gmac {
+		gmac0_rst: gmac0-rst {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		gmac1_rst: gmac1-rst {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	headphone {
+		hp_det: hp-det {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwren_h: pcie-pwren-h {
+			rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_pwren: usb-host-pwren {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb_otg0_pwren: usb-otg0-pwren {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sai1m0_lrck
+		     &sai1m0_sclk
+		     &sai1m0_sdi0
+		     &sai1m0_sdo0>;
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <200000000>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	phy-supply = <&vcc_5v0_typec0>;
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc_5v0_usbhost>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
-- 
2.34.1


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v2 0/2] Add support for 100ASK DShanPi A1

[Rob Herring (Arm)]

On Tue, 26 Aug 2025 11:08:15 +0800, Hsun Lai wrote:
> This series add support for 100ASK DShanPi A1.
> 
> Info of device can be found at:
> https://wiki.dshanpi.org/en/docs/DshanPi-A1/intro/
> 
> Changes in v2:
> - Delete the pwm include file (Chukun Pan, v1)
> - Fix vcc3v3_pcie gpios (Chukun Pan, v1)
> - Adjust the order of some nodes (Chukun Pan, v1)
> - Fix sdmmc (Chukun Pan, v1)
> - Add phy-supply for u2phy0_otg (Chukun Pan, v1)
> 
> Changes in v1:
> - Add support for 100ASK DShanPi A1
> 
> Hsun Lai (2):
>   dt-bindings: arm: rockchip: Add 100ASK DShanPi A1
>   arm64: dts: rockchip: add DTs for 100ASK DShanPi A1
> 
>  .../devicetree/bindings/arm/rockchip.yaml     |   5 +
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/rk3576-100ask-dshanpi-a1.dts | 838 ++++++++++++++++++
>  3 files changed, 844 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts
> 
> --
> 2.34.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/v6.17-rc1-22-g7d11b8c260ea (exact match)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/rockchip/' for 20250826030818.3485927-1-i@chainsx.cn:

arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dtb: syscon@26034000 (rockchip,rk3576-dcphy-grf): clocks: False schema does not allow [[21, 492]]
	from schema $id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dtb: /soc/dsi@27d80000: failed to match any schema with compatible: ['rockchip,rk3576-mipi-dsi2']






_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v2 0/2] Add support for 100ASK DShanPi A1

[Heiko Stuebner]

Am Dienstag, 26. August 2025, 15:56:43 Mitteleuropäische Sommerzeit schrieb Rob Herring (Arm):
> 
> On Tue, 26 Aug 2025 11:08:15 +0800, Hsun Lai wrote:
> > This series add support for 100ASK DShanPi A1.
> > 
> > Info of device can be found at:
> > https://wiki.dshanpi.org/en/docs/DshanPi-A1/intro/
> > 
> > Changes in v2:
> > - Delete the pwm include file (Chukun Pan, v1)
> > - Fix vcc3v3_pcie gpios (Chukun Pan, v1)
> > - Adjust the order of some nodes (Chukun Pan, v1)
> > - Fix sdmmc (Chukun Pan, v1)
> > - Add phy-supply for u2phy0_otg (Chukun Pan, v1)
> > 
> > Changes in v1:
> > - Add support for 100ASK DShanPi A1
> > 
> > Hsun Lai (2):
> >   dt-bindings: arm: rockchip: Add 100ASK DShanPi A1
> >   arm64: dts: rockchip: add DTs for 100ASK DShanPi A1
> > 
> >  .../devicetree/bindings/arm/rockchip.yaml     |   5 +
> >  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
> >  .../dts/rockchip/rk3576-100ask-dshanpi-a1.dts | 838 ++++++++++++++++++
> >  3 files changed, 844 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dts
> > 
> > --
> > 2.34.1
> > 
> > 
> > 
> 
> 
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
> 
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform
> maintainer whether these warnings are acceptable or not. No need to reply
> unless the platform maintainer has comments.
> 
> If you already ran DT checks and didn't see these error(s), then
> make sure dt-schema is up to date:
> 
>   pip3 install dtschema --upgrade
> 
> 
> This patch series was applied (using b4) to base:
>  Base: attempting to guess base-commit...
>  Base: tags/v6.17-rc1-22-g7d11b8c260ea (exact match)
> 
> If this is not the correct base, please add 'base-commit' tag
> (or use b4 which does this automatically)
> 
> New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/rockchip/' for 20250826030818.3485927-1-i@chainsx.cn:

both warnings are not the fault of this board addition, but instead
come from "unrelated" sources in the main rk3576 dtsi:


> arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dtb: syscon@26034000 (rockchip,rk3576-dcphy-grf): clocks: False schema does not allow [[21, 492]]
> 	from schema $id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#

I messed up and forgot to add the new syscon to the clocks-required list.
Will fix that shortly.


> arch/arm64/boot/dts/rockchip/rk3576-100ask-dshanpi-a1.dtb: /soc/dsi@27d80000: failed to match any schema with compatible: ['rockchip,rk3576-mipi-dsi2']

the rk3576 dsi compatible is in drm-misc-next [0], so should
hit linux-next shortly.


[0] https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/f05530bdaf42aa0e6bb4cde76ba6a081cf473d44



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

Re: [PATCH v2 2/2] arm64: dts: rockchip: add DTs for 100ASK DShanPi A1

[Chukun Pan]

Hi,

> +	vcc_12v0_dcin: regulator-vcc-12v0-dcin {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_12v0_dcin";

From the schematic [1], it should be called vcc_in?

> +	vcc3v3_pcie: regulator-vcc3v3-pcie {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie_pwren_h>;

Schematic: "PCIE0_PERSTn"
It seems that it should be the reset gpio of pcie
instead of the enable of regulator.

> +		regulator-name = "vcc3v3_pcie";
> +		vin-supply = <&vcc_12v0_dcin>;

From the schematic, it should be called vcc3v3_m2?
VCC5V0_SYS -> VCC3V3_M2

> +	vcc_5v0_sys: regulator-vcc-5v0-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_5v0_sys";

Schematic: "VCC5V0_SYS_S5" / "VCC5V0_SYS"

> +	vcc_5v0_typec0: regulator-vcc-5v0-typec0 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_otg0_pwren>;

Schematic: "TYPEC5V_PWREN_H"

> +		regulator-name = "vcc_5v0_typec0";
> +		vin-supply = <&vcc_5v0_device>;

Schematic: "VBUS5V0_TYPEC"
VCC5V0_SYS -> VBUS5V0_TYPEC

> +	vcc_5v0_usbhost: regulator-vcc-5v0-usbhost {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;

Does this regulator really exist?
GPIO0_C7_d -> ETH1_INTn

The power supply of USB3 host comes from
USB1_P1_PWR/USB1_P2_PWR - VCC5V0_SYS

> +	vcc_3v3_ufs_s0: regulator-vcc-ufs-s0 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_3v3_ufs_s0";
> +		regulator-boot-on;
> +		regulator-always-on;

The order of properties should be consistent:
```
		regulator-always-on;
		regulator-boot-on;
```

> +&i2c2 {
> +	status = "okay";
> +
> +	hym8563: rtc@51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		clock-output-names = "hym8563";
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;

GPIO0_A0 is connected to the button in the schematic [1]

[1] https://dl.100ask.net/Hardware/MPU/RK3576-DshanPi-A1/DshanPi-A1-RK3576-SCH_V1.0.pdf

--
2.25.1



_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip