From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org, sebastian.reichel@collabora.com,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V2 4/4] arm64: dts: rockchip: Add host wake pin for wifi on Indiedroid Nova
Date: Tue, 18 Nov 2025 16:30:48 -0600 [thread overview]
Message-ID: <20251118223048.4531-5-macroalpha82@gmail.com> (raw)
In-Reply-To: <20251118223048.4531-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
Add the pin definition for the host wake interrupt on the Indiedroid
Nova. This necessitates adding a node for the wifi controller to
properly define the interrupt. Additionally, we can consolidate both
pinctrl definitions under a wifi node to note their common functionality.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
.../dts/rockchip/rk3588s-indiedroid-nova.dts | 30 ++++++++++++++-----
1 file changed, 23 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
index 7233e290d0cf..174d299cc6bb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts
@@ -525,13 +525,6 @@ hym8563_int: hym8563-int {
};
};
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins =
- <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
usb-typec {
usbc0_int: usbc0-int {
rockchip,pins =
@@ -543,6 +536,18 @@ typec5v_pwren: typec5v-pwren {
<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_host_wake_irq: wifi-host-wake-irq {
+ rockchip,pins =
+ <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
};
&rknn_core_0 {
@@ -593,6 +598,7 @@ &sdhci {
};
&sdio {
+ #address-cells = <1>;
bus-width = <4>;
cap-sd-highspeed;
cap-sdio-irq;
@@ -604,9 +610,19 @@ &sdio {
no-sd;
non-removable;
sd-uhs-sdr104;
+ #size-cells = <0>;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vcc_1v8_s3>;
status = "okay";
+
+ sdio_wifi: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "host-wake";
+ pinctrl-0 = <&wifi_host_wake_irq>;
+ pinctrl-names = "default";
+ };
};
&sdmmc {
--
2.43.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-11-18 22:33 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-18 22:30 [PATCH V2 0/4] Indiedroid Nova Devicetree Updates Chris Morgan
2025-11-18 22:30 ` [PATCH V2 1/4] arm64: dts: rockchip: Add clk32k_in for Indiedroid Nova Chris Morgan
2025-11-18 22:30 ` [PATCH V2 2/4] arm64: dts: rockchip: Define regulator for pcie2x1l2 Chris Morgan
2025-11-18 22:30 ` [PATCH V2 3/4] arm64: dts: rockchip: Correct pinctrl for pcie for Indiedroid Nova Chris Morgan
2025-11-18 22:30 ` Chris Morgan [this message]
2025-11-20 22:23 ` [PATCH V2 0/4] Indiedroid Nova Devicetree Updates Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251118223048.4531-5-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).