[PATCH v7 0/6] Add support for Orange Pi 5 Pro

[Dennis Gilmore <dennis@ausil.us>]

This series adds initial support for Orange Pi 5 Pro. The PCIe attached
network driver(dwmac-motorcomm) was just added.

The series was tested against Linux 7.0-rc7

Please take a look.

Thank you,

Dennis Gilmore

Changes in v7:
- Fix up whitespace issues identified by checkpatch.pl --strict in
  rk3588s-orangepi-5-5b.dtsi
- checkpatch gave a warning for WARNING: phy-mode "rgmii-rxid" without
  comment, as this was moved over I left it untouched
- Added lontium,lt8711uxd to the compatible enum in the simple-bridge
  binding
- Added lontium,lt8711uxd match entry with DRM_MODE_CONNECTOR_HDMIA to
  the simple-bridge driver
- New patch to rename the regulator labels for the es8388 supplies to
  match the schematics as they all use vcca_*
- RK806 PLDO1 and PLDO2 outputs are swapped between the 5/5B and pro.
  move their definition to the shared 5/5B dtsi and 5 Pro dts
- Fixed ES8388 PVDD-supply — vcca_3v3_s0 → vcca_1v8_s0, 5 Pro is
  different to 5 and 5b.
- analog-sound: use CPU-as-clock-master on the Pro. The ES8388 is wired to
  i2s2_2ch (the only I2S block physically routed to the codec pins on this
  board), which uses the legacy rockchip_i2s driver. That driver's
  slave-mode trigger path hangs for 200 µs polling I2S_CLR and bails with
  -ETIMEDOUT ("lrclk update failed"). The TDM-capable i2s0/i2s1/i2s5
  blocks served by rockchip_i2s_tdm don't have this issue, which is why
  other mainline ES8388 boards get away with bitclock-master = masterdai.
  Drop bitclock-master/frame-master and the masterdai label to let the I2S
  block generate BCLK/LRCK itself
- Added pinctrl entries for all GPIO pins (dp_bridge_en, vcc3v3_phy1_en,
  wifi_enable_h, pcie2x1l1_rst, pcie2x1l2_rst)
- DP bridge rework — replaced dp-connector node with proper chain:
    - lt8711uxd bridge node (compatible lontium,lt8711uxd, with port@0/port@1
      endpoints). Bridge power is gated by the vcc3v3_dp regulator, whose
      enable GPIO (GPIO3_PC2) is driven via the dp_bridge_en pinctrl group;
      no enable-gpios/vdd-supply on the bridge node itself.
    - hdmi1-con connector node (compatible hdmi-connector, type a)
    - dp0_out endpoint now points to bridge input instead of old connector
- drop accidentally included, unrelated changes to
  drivers/gpu/drm/bridge/synopsys/dw-dp.c and
  Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
- link to v6 https://lore.kernel.org/linux-devicetree/20260411024743.195385-1-dennis@ausil.us/

Changes in v6:
- Move the shared configs for the Orange Pi 5 and Orange Pi 5b from each
  devices dts to a shared rk3588s-orangepi-5-5b.dtsi to avoid duplication
- Remove empty ports subnodeis from typea_con
- Move i2s2m1_mclk pinctrl from &i2s2 to the es8388 codec node
- Add dp-con, dp0_out, dp0_in, and vp1 nodes, plus the vcc3v3_dp regulator
  in order to get the second HDMI port working via its transparent
  LT8711UXD DP to HDMI bridge
- link to v5 https://lore.kernel.org/linux-devicetree/20260401010707.2584962-1-dennis@ausil.us/

Changes in v5:
- define a connector node for Type-A port, and list the regulator as its VBUS supply explicitly.
- Requires https://lore.kernel.org/all/20260217-typea-vbus-v1-1-657b4e55a4c2@flipper.net/
- link to v4 https://lore.kernel.org/linux-devicetree/20260310031002.3921234-1-dennis@ausil.us/

Changes in v4:
- rename vcc3v3_pcie20 copied from rk3588s-orangepi-5.dts to vcc3v3_phy1 to match the schematic
- use vcc_3v3_s3 as the supply not vcc5v0_sys for PCIe
- remove the definition for vcc3v3_pcie_m2 as it does not really exist
  as a regulator

- link to v3 https://lore.kernel.org/linux-devicetree/20260306024634.239614-1-dennis@ausil.us/

Changes in v3:
- moved leds from gpio-leds to pwm-leds
- remove disable-wp from sdio
- rename vcc3v3_pcie_eth regulator to vcc3v3_pcie_m2 to reflect the
  purppose
- actually clean up the delete lines and comments missed in v2
- link to v2 https://lore.kernel.org/linux-devicetree/20260304025521.210377-1-dennis@ausil.us/

Changes in v2:
- moved items not shared by orangepi 5/5b/5 Pro from dtsi to 5 and 5b
  dts files
- removed all the comments and deleted properties from 5 Pro dts
- Link to v1 https://lore.kernel.org/linux-devicetree/20260228205418.2944620-1-dennis@ausil.us/


Dennis Gilmore (6):
  dt-bindings: arm: rockchip: Add Orange Pi 5 Pro
  dt-bindings: display: bridge: simple: document the Lontium LT8711UXD
    DP-to-HDMI bridge
  drm/bridge: simple: Add the Lontium LT8711UXD DP-to-HDMI bridge
  arm64: dts: rockchip: rk3588s-orangepi-5: rename PLDO regulator labels
    to match schematic
  arm64: dts: rockchip: refactor items from Orange Pi 5/b to prep for
    Pro
  arm64: dts: rockchip: Add Orange Pi 5 Pro board support

 .../devicetree/bindings/arm/rockchip.yaml     |   1 +
 .../display/bridge/simple-bridge.yaml         |   1 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3588s-orangepi-5-5b.dtsi   | 222 +++++++++
 .../dts/rockchip/rk3588s-orangepi-5-pro.dts   | 442 ++++++++++++++++++
 .../boot/dts/rockchip/rk3588s-orangepi-5.dts  |   6 +-
 .../boot/dts/rockchip/rk3588s-orangepi-5.dtsi | 235 +---------
 .../boot/dts/rockchip/rk3588s-orangepi-5b.dts |   2 +-
 drivers/gpu/drm/bridge/simple-bridge.c        |   5 +
 9 files changed, 695 insertions(+), 220 deletions(-)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-5b.dtsi
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5-pro.dts

-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip