public inbox for linux-rockchip@lists.infradead.org
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: linux-pm@vger.kernel.org, dri-devel@lists.freedesktop.org,
	devicetree@vger.kernel.org, xsf@rock-chips.com, sre@kernel.org,
	simona@ffwll.ch, airlied@gmail.com, tzimmermann@suse.de,
	mripard@kernel.org, maarten.lankhorst@linux.intel.com,
	jesszhan0024@gmail.com, neil.armstrong@linaro.org,
	heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
	robh@kernel.org, Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 6/6] arm64: dts: rockchip: Add Anbernic RG Vita-Pro
Date: Mon, 27 Apr 2026 12:09:14 -0500	[thread overview]
Message-ID: <20260427170914.5062-7-macroalpha82@gmail.com> (raw)
In-Reply-To: <20260427170914.5062-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add device tree for the Anbernic RG Vita-Pro, based on the Rockchip
RK3576. All hardware is currently working except for the accelerometer,
the touchscreen, the battery monitor, and DisplayPort over USB-C. PWM
is also missing currently, and as a result the LEDs and panel backlight
are currently controlled via GPIO but will be changed to PWM once
supported.

The Anbernic RG Vita-Pro includes the following hardware:
 - A 1080x1920 DSI display with touch.
 - 21 buttons.
 - 2 Analog joysticks controlled via userspace.
 - 3 LEDs.
 - 64GB eMMC, 2 SDMMC slots.
 - RTL8852BE WiFi/Bluetooth combo
 - 1 USB 3.0 USB-C port in OTG mode.
 - 3.5mm headphone jack with play button support.
 - 5000mAH battery

The following hardware has incomplete driver support and is not yet
working:
 - An Invensense icm42607p accelerometer.
 - A Cellwise cw221x battery monitor.
 - A Synaptics i2c touchscreen.
 - DisplayPort over USB-C alt-mode.
 - PWM controller.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |    3 +
 .../rockchip/rk3576-anbernic-rg-vita-pro.dts  | 1317 +++++++++++++++++
 2 files changed, 1320 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-anbernic-rg-vita-pro.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index cb55c6b70d0e..78c3778eaf4e 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -165,6 +165,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-display-vz.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-wolfvision-pf5-io-expander.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-100ask-dshanpi-a1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-anbernic-rg-vita-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
@@ -215,6 +216,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-gameforce-ace.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova-tower.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova-test.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-anbernic-rg-vita-pro.dts b/arch/arm64/boot/dts/rockchip/rk3576-anbernic-rg-vita-pro.dts
new file mode 100644
index 000000000000..9dcf3f5a12d1
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3576-anbernic-rg-vita-pro.dts
@@ -0,0 +1,1317 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2026 Chris Morgan <macromorgan@hotmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+
+#include "rk3576.dtsi"
+
+/ {
+	model = "Anbernic RG Vita Pro";
+	chassis-type = "handset";
+	compatible = "anbernic,rg-vita-pro", "rockchip,rk3576";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc_keys_home: adc-keys-home {
+		compatible = "adc-keys";
+		io-channel-names = "buttons";
+		io-channels = <&saradc 1>;
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <60>;
+
+		button-home {
+			label = "HOME";
+			linux,code = <BTN_MODE>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	adc_keys_play: adc-keys-play {
+		compatible = "adc-keys";
+		io-channel-names = "buttons";
+		io-channels = <&saradc 3>;
+		keyup-threshold-microvolt = <1300000>;
+		poll-interval = <60>;
+
+		button-play {
+			label = "PLAY";
+			linux,code = <KEY_PLAYPAUSE>;
+			press-threshold-microvolt = <1750>;
+		};
+	};
+
+	/*
+	 * Values from BSP, except for internal resistance which was set
+	 * to 80 micro ohms which is more likely 80000 micro ohms.
+	 */
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <8000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <10000000>;
+		constant-charge-voltage-max-microvolt = <4350000>;
+		factory-internal-resistance-micro-ohms = <80000>;
+		precharge-current-microamp = <180000>;
+		precharge-upper-limit-microvolt = <3600000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
+	hp_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&hp_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Headphone Amp";
+	};
+
+	/*
+	 * LEDs and Backlights can be controlled as a PWM, but PWM
+	 * driver is not yet available.
+	 */
+	gpio_backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&led_backlight_h>;
+		pinctrl-names = "default";
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_amber_h>, <&led_green_h>, <&led_red_h>;
+		pinctrl-names = "default";
+
+		charging-led {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_CHARGING;
+			gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+		};
+
+		full-led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+		};
+
+		bat-low-led {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ALARM;
+			gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio_keys_control: gpio-keys-control {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&gamepad_keys_l>;
+		pinctrl-names = "default";
+
+		button-a {
+			gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
+			label = "EAST";
+			linux,code = <BTN_EAST>;
+		};
+
+		button-b {
+			gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+			label = "SOUTH";
+			linux,code = <BTN_SOUTH>;
+		};
+
+		button-down {
+			gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+			label = "DPAD-DOWN";
+			linux,code = <BTN_DPAD_DOWN>;
+		};
+
+		button-l1 {
+			gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>;
+			label = "TL";
+			linux,code = <BTN_TL>;
+		};
+
+		button-l2 {
+			gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+			label = "TL2";
+			linux,code = <BTN_TL2>;
+		};
+
+		button-left {
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+			label = "DPAD-LEFT";
+			linux,code = <BTN_DPAD_LEFT>;
+		};
+
+		button-menu {
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
+			label = "HOME";
+			linux,code = <KEY_HOME>;
+		};
+
+		button-right {
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+			label = "DPAD-RIGHT";
+			linux,code = <BTN_DPAD_RIGHT>;
+		};
+
+		button-r1 {
+			gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+			label = "T2";
+			linux,code = <BTN_TR>;
+		};
+
+		button-r2 {
+			gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
+			label = "TR2";
+			linux,code = <BTN_TR2>;
+		};
+
+		button-select {
+			gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>;
+			label = "SELECT";
+			linux,code = <BTN_SELECT>;
+		};
+
+		button-start {
+			gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>;
+			label = "START";
+			linux,code = <BTN_START>;
+		};
+
+		button-thumbl {
+			gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+			label = "THUMBL";
+			linux,code = <BTN_THUMBL>;
+		};
+
+		button-thumbr {
+			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_LOW>;
+			label = "THUMBR";
+			linux,code = <BTN_THUMBR>;
+		};
+
+		button-up {
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+			label = "DPAD-UP";
+			linux,code = <BTN_DPAD_UP>;
+		};
+
+		button-x {
+			gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+			label = "NORTH";
+			linux,code = <BTN_NORTH>;
+		};
+
+		button-y {
+			gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>;
+			label = "WEST";
+			linux,code = <BTN_WEST>;
+		};
+	};
+
+	gpio_keys_volume: gpio-keys-volume {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-0 = <&vol_keys_l>;
+		pinctrl-names = "default";
+
+		vol-down-key {
+			gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEDOWN";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		vol-up-key {
+			gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
+			label = "VOLUMEUP";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "c";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_en_h>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_det>;
+		pinctrl-names = "default";
+		simple-audio-card,aux-devs = <&aw87391_pa_l>, <&aw87391_pa_r>,
+					     <&hp_amp>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,name = "rockchip,es8388-codec";
+		simple-audio-card,pin-switches = "Headphones", "Internal Speakers";
+		simple-audio-card,routing =
+			"LINPUT1", "Mic Jack",
+			"LINPUT2", "Mic Jack",
+			"RINPUT1", "Onboard Microphone",
+			"RINPUT2", "Onboard Microphone",
+			"Headphones", "Headphone Amp OUTL",
+			"Headphones", "Headphone Amp OUTR",
+			"Headphone Amp INL", "LOUT1",
+			"Headphone Amp INR", "ROUT1",
+			"Internal Speakers", "Left Amp OUT",
+			"Internal Speakers", "Right Amp OUT",
+			"Left Amp IN", "LOUT2",
+			"Right Amp IN", "ROUT2";
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Internal Speakers";
+		status = "okay";
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <1100000>;
+		regulator-min-microvolt = <1100000>;
+		regulator-name = "vcc_1v1_nldo_s3";
+		vin-supply = <&vcc_3v8_sys>;
+	};
+
+	vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <2000000>;
+		regulator-min-microvolt = <2000000>;
+		regulator-name = "vcc_2v0_pldo_s3";
+		vin-supply = <&vcc_3v8_sys>;
+	};
+
+	vcc_3v8_sys: regulator-vcc-3v8-sys {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3800000>;
+		regulator-min-microvolt = <3800000>;
+		regulator-name = "vcc_3v8_sys";
+	};
+
+	vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_3v3_sd_s0_h>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc3v3_sd_s0";
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vcc_sdio: regulator-vcc-sdio {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sdio";
+		gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_sdio_h>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <1800000>;
+		states = <1800000 0>, <3300000 1>;
+	};
+
+	vcc_wifi: regulator-vcc-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_wifi";
+		enable-active-high;
+		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wifi_h>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	vdd_lcd: regulator-vdd-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_lcd";
+		regulator-always-on;
+		enable-active-high;
+		gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vdd_lcd_h>;
+		pinctrl-names = "default";
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&dsi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel: panel@0 {
+		compatible = "anbernic,panel-vita-pro";
+		reg = <0>;
+		backlight = <&gpio_backlight>;
+		enable-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable>, <&lcd_rst>;
+		reset-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
+		rotation = <270>;
+		vdd-supply = <&vdd_lcd>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+};
+
+&dsi_in {
+	dsi_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_dsi>;
+	};
+};
+
+&dsi_out {
+	mipi_out_panel: endpoint {
+		remote-endpoint = <&mipi_in_panel>;
+	};
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&hdptxphy {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0m1_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* synaptics,dsx-i2c touchscreen at 0x70 */
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic@23 {
+		compatible = "rockchip,rk806";
+		reg = <0x23>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins
+			     &rk806_dvs1_null
+			     &rk806_dvs2_null
+			     &rk806_dvs3_null>;
+		system-power-controller;
+		vcc1-supply = <&vcc_3v8_sys>;
+		vcc2-supply = <&vcc_3v8_sys>;
+		vcc3-supply = <&vcc_3v8_sys>;
+		vcc4-supply = <&vcc_3v8_sys>;
+		vcc5-supply = <&vcc_3v8_sys>;
+		vcc6-supply = <&vcc_3v8_sys>;
+		vcc7-supply = <&vcc_3v8_sys>;
+		vcc8-supply = <&vcc_3v8_sys>;
+		vcc9-supply = <&vcc_3v8_sys>;
+		vcc10-supply = <&vcc_3v8_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc_3v8_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc_3v8_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs1_rst: dvs1-rst-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs1_slp: dvs1-slp-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs2_dvs: dvs2-dvs-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs2_gpio: dvs2-gpio-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs2_rst: dvs2-rst-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs2_slp: dvs2-slp-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun1";
+		};
+
+		rk806_dvs3_dvs: dvs3-dvs-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun4";
+		};
+
+		rk806_dvs3_gpio: dvs3-gpio-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun5";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun2";
+		};
+
+		rk806_dvs3_rst: dvs3-rst-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun3";
+		};
+
+		rk806_dvs3_slp: dvs3-slp-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun1";
+		};
+
+		regulators {
+			vdd_cpu_big_s0: dcdc-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_big_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_npu_s0: dcdc-reg2 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_npu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: dcdc-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_gpu_s0: dcdc-reg5 {
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <900000>;
+				regulator-name = "vdd_gpu_s0";
+				regulator-ramp-delay = <12500>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vddq_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_logic_s0: dcdc-reg7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <800000>;
+				regulator-name = "vdd_logic_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_1v8_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg9 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vdd2_ddr_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg10 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdd_ddr_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_s0: pldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca_1v8_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo2_s0: pldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_1v2_s0: pldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vdda_1v2_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_3v3_s0: pldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_3v3_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd_s0";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcca1v8_pldo6_s3: pldo-reg6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcca1v8_pldo6_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdd_0v75_s3";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdda_ddr_pll_s0: nldo-reg2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_ddr_pll_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v75_hdmi_s0: nldo-reg3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda0v75_hdmi_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v85_s0: nldo-reg4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-name = "vdda_0v85_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v75_s0: nldo-reg5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+				regulator-name = "vdda_0v75_s0";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* inv,icm42607 IMU at 0x68 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	es8388: audio-codec@10 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x10>;
+		assigned-clock-rates = <12288000>;
+		assigned-clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		AVDD-supply = <&vcca_3v3_s0>;
+		clocks = <&cru CLK_SAI1_MCLKOUT_TO_IO>;
+		DVDD-supply = <&vcc_3v3_s3>;
+		HPVDD-supply = <&vcca_3v3_s0>;
+		pinctrl-0 = <&sai1m0_mclk>;
+		pinctrl-names = "default";
+		PVDD-supply = <&vcc_3v3_s3>;
+		#sound-dai-cells = <0>;
+	};
+
+	aw87391_pa_l: audio-codec@58 {
+		compatible = "anbernic,rgds-amp", "awinic,aw87391";
+		reg = <0x58>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "Left Amp";
+	};
+
+	aw87391_pa_r: audio-codec@5b {
+		compatible = "anbernic,rgds-amp", "awinic,aw87391";
+		reg = <0x5b>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "Right Amp";
+	};
+};
+
+&i2c6 {
+	pinctrl-0 = <&i2c6m3_xfer>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	sgm41542: charger@3b {
+		compatible = "sgmicro,sgm41542";
+		reg = <0x3b>;
+		input-current-limit-microamp = <3000000>;
+		input-voltage-limit-microvolt = <4500000>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&charger_irq>;
+		pinctrl-names = "default";
+		monitored-battery = <&battery>;
+		status = "okay";
+
+		regulators {
+			vbus5v0_typec: otg-vbus {
+				regulator-name = "vbus5v0_typec";
+				regulator-max-microvolt = <5000000>;
+				regulator-min-microvolt = <5000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+
+	/* Unused iSmartWare SW2001 encryption device at 0x3c */
+
+	husb311: typec-portc@4e {
+		compatible = "hynetek,husb311", "richtek,rt1711h";
+		reg = <0x4e>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&usbc_int>;
+		pinctrl-names = "default";
+		status = "okay";
+		vbus-supply = <&vbus5v0_typec>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <10000000>;
+			power-role = "dual";
+			try-power-role  = "sink";
+
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_FIXED(9000, 2000, PDO_FIXED_USB_COMM)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0xffffffff>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_hs_ep: endpoint {
+						remote-endpoint = <&usb_drd0_hs_ep>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					usbc0_ss_ep: endpoint {
+						remote-endpoint = <&usb_drd0_ss_ep>;
+					};
+				};
+				port@2 {
+					reg = <2>;
+					usbc0_dp_ep: endpoint {
+						remote-endpoint = <&usbdp_phy_ep>;
+					};
+				};
+			};
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+
+	/* cellwise,cw221X battery manager at 0x64 */
+};
+
+&mipidcphy {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_perstn>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_wifi>;
+	status = "okay";
+};
+
+&pinctrl {
+	audio {
+		hp_amp_enable_h: hp-amp-enable {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		hp_det: hp-det {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	bluetooth {
+		bt_reset_gpio: bt-reset-pin {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_gpio: bt-wake-pin {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_irq: bt-wake-host-irq {
+			rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	charger {
+		charger_irq: charger-irq {
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	display {
+		lcd_enable: lcd-enable {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lcd_rst: lcd-rst {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	gpio-keys {
+		vol_keys_l: vol-keys_l {
+			rockchip,pins =
+				<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		gamepad_keys_l: gamepad-keys-l {
+			rockchip,pins =
+				<3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
+				<3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	gpio-leds {
+		led_amber_h: led-amber-h {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_backlight_h: led-backlight-h {
+			rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_green_h: led-green-h {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_red_h: led-red-h {
+			rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		pcie0_perstn: pcie0-perstn {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	regulator {
+		vcc_3v3_sd_s0_h: vcc-3v3-sd-s0-h {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_sdio_h: vcc-sdio-h {
+			rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc_wifi_h: vcc-wifi-h {
+			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vdd_lcd_h: vdd-lcd-h {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	touch {
+		touch_int: touch-int {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usbc_int: usbc-int {
+			rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		usbc0_sbu1: usbc0-sbu1 {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		usbc0_sbu2: usbc0-sbu2 {
+			rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+	wifi {
+		wifi_en_h: wifi-en-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&sai1 {
+	pinctrl-0 = <&sai1m0_lrck
+		     &sai1m0_sclk
+		     &sai1m0_sdi0
+		     &sai1m0_sdo0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai6 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca1v8_pldo2_s0>;
+	status = "okay";
+};
+
+&sdio {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-mmc;
+	no-sdio;
+	pinctrl-0 = <&sdmmc1m0_bus4>, <&sdmmc1m0_clk>,
+		    <&sdmmc1m0_cmd>, <&sdmmc1m0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd_s0>;
+	vqmmc-supply = <&vcc_sdio>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	no-sd;
+	no-sdio;
+	non-removable;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>,
+		    <&sdmmc0_cmd>, <&sdmmc0_det>;
+	pinctrl-names = "default";
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi1 {
+	num-cs = <1>;
+	pinctrl-0 = <&spi1m2_pins>, <&spi1m2_csn0>;
+	status = "okay";
+
+	/* SPI controlled MCU for joystick and joystick LEDs. */
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_dsi: endpoint@ROCKCHIP_VOP2_EP_MIPI0 {
+		reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+		remote-endpoint = <&dsi_in_vp1>;
+	};
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-0 = <&uart6m1_xfer>, <&uart6m1_ctsn>, <&uart6m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		device-wake-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&bt_reset_gpio>, <&bt_wake_gpio>, <&bt_wake_host_irq>;
+		pinctrl-names = "default";
+	};
+};
+
+&usbdp_phy {
+	mode-switch;
+	orientation-switch;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc0_sbu1 &usbc0_sbu2>;
+	sbu1-dc-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		usbdp_phy_ep: endpoint {
+			remote-endpoint = <&usbc0_dp_ep>;
+		};
+	};
+};
+
+&usb_drd0_dwc3 {
+	usb-role-switch;
+	dr_mode = "otg";
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			usb_drd0_hs_ep: endpoint {
+				remote-endpoint = <&usbc0_hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			usb_drd0_ss_ep: endpoint {
+				remote-endpoint = <&usbc0_ss_ep>;
+			};
+		};
+	};
+};
-- 
2.43.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  parent reply	other threads:[~2026-04-27 17:11 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-27 17:09 [PATCH 0/6] Add Anbernic RG Vita-Pro Chris Morgan
2026-04-27 17:09 ` [PATCH 1/6] dt-bindings: power: supply: sgm41542: document sgm41542 Chris Morgan
2026-04-28  7:47   ` Krzysztof Kozlowski
2026-04-27 17:09 ` [PATCH 2/6] power: supply: sgm41542: Add SG Micro sgm41542 charger Chris Morgan
2026-04-28  7:56   ` Krzysztof Kozlowski
2026-04-27 17:09 ` [PATCH 3/6] dt-bindings: display: panel: document Anbernic TD4310 panel Chris Morgan
2026-04-28  7:49   ` Krzysztof Kozlowski
2026-04-27 17:09 ` [PATCH 4/6] drm/panel: anbernic-td4310: Add RG Vita Pro panel Chris Morgan
2026-04-27 17:09 ` [PATCH 5/6] dt-bindings: arm: rockchip: Add Anbernic RG Vita-Pro Chris Morgan
2026-04-28  7:48   ` Krzysztof Kozlowski
2026-04-27 17:09 ` Chris Morgan [this message]
2026-04-27 17:13   ` [PATCH 6/6] arm64: dts: " Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260427170914.5062-7-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=jesszhan0024@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=macromorgan@hotmail.com \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=sre@kernel.org \
    --cc=tzimmermann@suse.de \
    --cc=xsf@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox