From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org, xsf@rock-chips.com, sre@kernel.org,
heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
robh@kernel.org, Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V8 0/4] Add Anbernic RG Vita-Pro
Date: Tue, 21 Jul 2026 12:09:03 -0500 [thread overview]
Message-ID: <20260721170907.131731-1-macroalpha82@gmail.com> (raw)
From: Chris Morgan <macromorgan@hotmail.com>
Add support for the Anbernic RG Vita-Pro, based on the Rockchip RK3576 SoC.
Changes Since V1:
- Updated documentation filename to matche compatible string.
- Corrected order of allocating IRQ in charger driver and switched
to using devm managed function to allocate work queue.
Changes Since V2:
- Corrected issue with naming of panel binding document and added
fallback compatible string.
- Switched to devm helpers in panel driver. Note that
devm_drm_panel_add() is currently only in the drm-next branch.
- Optimized setting GPIOs for panel driver.
Changes Since V3:
- Fixed numerous issues identifed by Sashiko bot, mainly relating
to unclamped or improperly clamped values from within the
charger driver.
- Corrected hard-coded values in the panel driver unprepare routine
as well as correcting an improperly checked return condition.
Changes Since V4:
- Fixed errors identified by Sashiko bot on charger driver that could
result in an improper value being written to the registers.
- Corrected some error handling in the panel driver.
Changes Since V5:
- Corrected minor errors in documentation and added default values.
- Further corrected clamping behavior in charger driver.
Changes Since V6:
- Additional corrections as suggested by Sashiko bot to fix potential
edge cases during probe for sgm41542.
- Corrected an improperly shifted value being written to register for
sgm41542.
- Changed a MV value to UV in sgm41542 driver to simplify function.
Changes Since V7:
- Added PM functions to sgm41542 driver per request from Sashiko,
which stops the hardware watchdog during suspend.
- Switched from device_init_wakeup() to devm_device_init_wakeup().
- Confirmed a state change in IRQ handler for sgm41542 to ensure we
don't update input current limit except when the vbus goes from
not okay to okay.
- Removed panel patches, which have already been accepted upstream.
Please note that this *may* cause an error about missing bindings.
See commit 0fd6ead8270270d859a28d0196a4b47e7d6845b8 in linux-next.
Chris Morgan (4):
dt-bindings: power: supply: sgm41542: document sgm41542
power: supply: sgm41542: Add SG Micro sgm41542 charger
dt-bindings: arm: rockchip: Add Anbernic RG Vita-Pro
arm64: dts: rockchip: Add Anbernic RG Vita-Pro
.../devicetree/bindings/arm/rockchip.yaml | 6 +
.../power/supply/sgmicro,sgm41542.yaml | 96 ++
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../rockchip/rk3576-anbernic-rg-vita-pro.dts | 1327 +++++++++++++++++
drivers/power/supply/Kconfig | 8 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/sgm41542_charger.c | 1111 ++++++++++++++
7 files changed, 2550 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/supply/sgmicro,sgm41542.yaml
create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-anbernic-rg-vita-pro.dts
create mode 100644 drivers/power/supply/sgm41542_charger.c
--
2.43.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next reply other threads:[~2026-07-21 17:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 17:09 Chris Morgan [this message]
2026-07-21 17:09 ` [PATCH V8 1/4] dt-bindings: power: supply: sgm41542: document sgm41542 Chris Morgan
2026-07-21 17:09 ` [PATCH V8 2/4] power: supply: sgm41542: Add SG Micro sgm41542 charger Chris Morgan
2026-07-21 17:09 ` [PATCH V8 3/4] dt-bindings: arm: rockchip: Add Anbernic RG Vita-Pro Chris Morgan
2026-07-21 17:09 ` [PATCH V8 4/4] arm64: dts: " Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260721170907.131731-1-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
--cc=xsf@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox