Linux-Rockchip Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Morgan <macroalpha82@gmail.com>
To: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org,
	heiko@sntech.de, conor+dt@kernel.org, krzk+dt@kernel.org,
	robh@kernel.org, sre@kernel.org, t.schramm@manjaro.org,
	Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH 1/3] dt-bindings: power: cw2015: add cw2215, cw2217, and cw2218
Date: Tue, 27 Oct 2026 08:17:49 -0500	[thread overview]
Message-ID: <20261027131751.1724448-2-macroalpha82@gmail.com> (raw)
In-Reply-To: <20261027131751.1724448-1-macroalpha82@gmail.com>

From: Chris Morgan <macromorgan@hotmail.com>

Add bindings for the Cellwise cw2215/cw2217/cw2218 i2C interface
battery gauge. It is similar in function to the existing cw2015 but
with a different register layout. Each of the cw2215, cw2217 and cw2218
only really differ in the minor specs and the hardware ID they display
when queried. shunt-resistor-micro-ohms is a property in use for
multiple devices so not appending a vendor prefix to it.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../bindings/power/supply/cw2015_battery.yaml | 42 +++++++++++++++----
 1 file changed, 35 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
index f7bde324153d..12d2d9a9cf6f 100644
--- a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -14,12 +14,13 @@ description: |
   phandle in monitored-battery. If specified the driver uses the
   charge-full-design-microamp-hours property of the battery.
 
-allOf:
-  - $ref: power-supply.yaml#
-
 properties:
   compatible:
-    const: cellwise,cw2015
+    enum:
+      - cellwise,cw2015
+      - cellwise,cw2215
+      - cellwise,cw2217
+      - cellwise,cw2218
 
   reg:
     maxItems: 1
@@ -31,8 +32,6 @@ properties:
       it is to mail two batteries to a test facility of CellWise and receive
       back a test report with the binary blob.
     $ref: /schemas/types.yaml#/definitions/uint8-array
-    minItems: 64
-    maxItems: 64
 
   cellwise,monitor-interval-ms:
     description:
@@ -41,7 +40,14 @@ properties:
 
   power-supplies:
     minItems: 1
-    maxItems: 8 # Should be enough
+    maxItems: 8  # Should be enough
+
+  shunt-resistor-micro-ohms:
+    description: |
+      The value, in micro-ohms, of the shunt resistor used for sampling
+      the battery current.
+    minimum: 1000000
+    maximum: 50000000
 
   monitored-battery: true
 
@@ -49,6 +55,28 @@ required:
   - compatible
   - reg
 
+allOf:
+  - $ref: power-supply.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - cellwise,cw2015
+    then:
+      properties:
+        shunt-resistor-micro-ohms: false
+
+        cellwise,battery-profile:
+          minItems: 64
+          maxItems: 64
+
+    else:
+      properties:
+        cellwise,battery-profile:
+          minItems: 80
+          maxItems: 80
+
 additionalProperties: false
 
 examples:
-- 
2.53.0


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2026-10-27 13:18 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-27 13:17 [PATCH 0/3] Add Cellwise CW2217 Chris Morgan
2026-10-27 13:17 ` Chris Morgan [this message]
2026-10-27 15:57   ` [PATCH 1/3] dt-bindings: power: cw2015: add cw2215, cw2217, and cw2218 Krzysztof Kozlowski
2026-10-27 13:17 ` [PATCH 2/3] power: supply: cw2217: Add support for Cellwise cw2217 Chris Morgan
2026-10-27 13:34   ` Shawn Lin
2026-10-27 15:46     ` Chris Morgan
2026-10-29  6:24   ` kernel test robot
2026-10-27 13:17 ` [PATCH 3/3] arm64: dts: rockchip: Add Battery Gauge to Anbernic Vita-Pro Chris Morgan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261027131751.1724448-2-macroalpha82@gmail.com \
    --to=macroalpha82@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=macromorgan@hotmail.com \
    --cc=robh@kernel.org \
    --cc=sre@kernel.org \
    --cc=t.schramm@manjaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox