From: Chris Morgan <macroalpha82@gmail.com>
To: linux-rockchip@lists.infradead.org
Cc: linux-pm@vger.kernel.org, maccraft123mc@gmail.com,
heiko@sntech.de, lee@kernel.org, sre@kernel.org,
Chris Morgan <macromorgan@hotmail.com>,
Zetarancio <zetarancio@users.noreply.github.com>
Subject: [PATCH V2 3/4] power: supply: rk817-charger: Clear SYS_CAN_SD register by default
Date: Mon, 2 Nov 2026 08:39:41 -0600 [thread overview]
Message-ID: <20261102143942.305293-4-macroalpha82@gmail.com> (raw)
In-Reply-To: <20261102143942.305293-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
The BSP driver for the rk817 charger by default clears the SYS_CAN_SD.
This register tells the PMIC that the system voltage can be shut down in
battery off mode. Though the BSP driver also included a way to bypass
this behavior, no boards have been observed using the override.
When this register is not cleared, it can result in a persistent power
drain on certain devices while the device is off, as observed by users.
Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Suggested-by: Zetarancio <zetarancio@users.noreply.github.com>
---
drivers/power/supply/rk817_charger.c | 9 +++++++++
include/linux/mfd/rk808.h | 1 +
2 files changed, 10 insertions(+)
diff --git a/drivers/power/supply/rk817_charger.c b/drivers/power/supply/rk817_charger.c
index 0c7287ad27c6..d7d367211d5e 100644
--- a/drivers/power/supply/rk817_charger.c
+++ b/drivers/power/supply/rk817_charger.c
@@ -1166,6 +1166,15 @@ static int rk817_battery_init(struct rk817_charger *charger,
regmap_write_bits(rk808->regmap, RK817_PMIC_CHRG_IN, RK817_USB_ILIM_EN,
(0x01 << 3));
+ /*
+ * Do not shut down the system voltage in bat_off mode. The BSP driver
+ * cleared this bit for all devices unless a specific device tree
+ * parameter was used, however I have yet to see such parameter on any
+ * device.
+ */
+ regmap_clear_bits(rk808->regmap,
+ RK817_PMIC_CHRG_TERM, RK817_SYS_CAN_SD);
+
return 0;
}
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 72419d311626..2bc58de53d82 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -1297,6 +1297,7 @@ enum rk809_reg_id {
#define RK817_USB_ILIM_EN (0x01 << 3)
#define RK817_USB_ILIM_SEL (0x07 << 0)
#define RK817_PMIC_CHRG_TERM 0xe6
+#define RK817_SYS_CAN_SD (0x01 << 7)
#define RK817_CHRG_TERM_ANA_DIG (0x01 << 2)
#define RK817_CHRG_TERM_ANA_SEL (0x03 << 0)
#define RK817_CHRG_EN (0x01 << 6)
--
2.53.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2026-11-02 14:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 14:39 [PATCH V2 0/4] Fix Incorrect State of Charge for RK817 Chris Morgan
2026-11-02 14:39 ` [PATCH V2 1/4] power: supply: rk817-charger: Fix NVRAM SoC Value Chris Morgan
2026-11-02 14:39 ` [PATCH V2 2/4] power: supply: rk817-charger: Resolve boot state of charge from the coulomb counter Chris Morgan
2026-11-02 14:39 ` Chris Morgan [this message]
2026-11-02 14:39 ` [PATCH V2 4/4] power: supply: rk817-charger: Clear full charge cal on resume Chris Morgan
2026-11-03 9:24 ` [PATCH V2 0/4] Fix Incorrect State of Charge for RK817 Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261102143942.305293-4-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=heiko@sntech.de \
--cc=lee@kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maccraft123mc@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=sre@kernel.org \
--cc=zetarancio@users.noreply.github.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox