From: MidG971 <midgy971@gmail.com>
To: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Cc: linux-rockchip@lists.infradead.org,
Tomeu Vizoso <tomeu@tomeuvizoso.net>,
Simon Xue <xxm@rock-chips.com>, Heiko Stuebner <heiko@sntech.de>,
dri-devel@lists.freedesktop.org
Subject: Re: RK3568 NPU: what triggers the CNA weight-fetch DMA after the executer engages? (mainline rocket vs vendor rknpu)
Date: Fri, 20 Nov 2026 12:27:54 +0100 [thread overview]
Message-ID: <20261120112754.1400099-1-midgy971@gmail.com> (raw)
In-Reply-To: <20260721230746.175786-1-midgy971@gmail.com>
Hi Chaoyi, hi all,
A gentle follow-up on the thread above from July: no reply yet, and I
wanted to add the new evidence I gathered since, in case it sharpens
the question.
Since then I confirmed the engage/completion split explicitly:
- Loading the vendor rknpu and running ONE vendor job ("priming"),
then unloading it (no power cycle) and loading mainline rocket,
makes rocket's executers engage for the first time (S_POINTER
bit 16 = 0x1000e on all five units, matching the working vendor
signature). So the engage is one-time HW state established by a
*working vendor job*, not by probe/init writes.
- But completion still fails afterwards: even primed, rocket's job
times out with wt_rd = 0 / dt_wr = 0 (vendor: 0x1900 / 0x6400).
- An NIU reset pulse (CRU SOFTRST_CON2 bits 8..10) at resume CLEARS
the primed state (reads drop to 0); nothing we write re-arms it.
I also tested a kiln-style reset edge inside rockchip_pd_power()
at PD power-on (RK3576 kiln 0002 analog) on v7.4-rc3, including a
forced cold power cycle of the PMU island from userspace:
negative -- the pulse does not re-arm the sequencer, and the PD
never actually cold-cycles on this board.
- Cache coherency ruled out (forced dma_sync of all BOs at submit;
live DT has no dma-coherent). CBUF_DBG matches the vendor's engaged
values pre/post job. The board now runs mainline v7.4-rc3 and the
gate reproduces there unchanged.
So the refined question: after a vendor job has left the NPU in the
armed per-power-session state, which step of that job arms the CNA
weight-fetch sequencer - and is there any RK3568-visible precondition
(CBUF/DCOMP/weight-DMA enable, ordering vs. engage) I could replicate
in rocket so it computes without the vendor prime?
Happy to run any targeted capture on the board (RK3568, ROCK 3B).
Thanks again.
Kind regards,
Midgy
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
prev parent reply other threads:[~2026-11-20 11:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 23:07 RK3568 NPU: what triggers the CNA weight-fetch DMA after the executer engages? (mainline rocket vs vendor rknpu) Midgy BALON
2026-11-20 11:27 ` MidG971 [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120112754.1400099-1-midgy971@gmail.com \
--to=midgy971@gmail.com \
--cc=chaoyi.chen@rock-chips.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=linux-rockchip@lists.infradead.org \
--cc=tomeu@tomeuvizoso.net \
--cc=xxm@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox