From: "Heiko Stübner" <heiko@sntech.de>
To: linux-rockchip@lists.infradead.org,
Ezequiel Garcia <ezequiel@collabora.com>
Cc: Peter Geis <pgwipeout@gmail.com>,
Kever Yang <kever.yang@rock-chips.com>,
Ezequiel Garcia <ezequiel@collabora.com>
Subject: Re: [PATCH 1/2] arm64: dts: rockchip: add GPU node for rk3568
Date: Thu, 29 Jul 2021 12:08:48 +0200 [thread overview]
Message-ID: <2147216.TLkxdtWsSY@diego> (raw)
In-Reply-To: <20210719224946.25359-1-ezequiel@collabora.com>
Am Dienstag, 20. Juli 2021, 00:49:45 CEST schrieb Ezequiel Garcia:
> Rockchip SoCs RK3566 and RK3568 have a Mali Gondul core
> which is based on the Bifrost architecture. It has
> one shader core and two execution engines.
>
> Quoting the datasheet:
>
> Mali-G52 1-Core-2EE
> * Support 1600Mpix/s fill rate when 800MHz clock frequency
> * Support 38.4GLOPs when 800MHz clock frequency
>
> Mesa side: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10771
missing an addition to
Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
Thanks
Heiko
>
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
> ---
> arch/arm64/boot/dts/rockchip/rk3568.dtsi | 47 ++++++++++++++++++++++++
> 1 file changed, 47 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> index 618849186c39..59844dfaeb86 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
> @@ -128,6 +128,35 @@ opp-1992000000 {
> };
> };
>
> + gpu_opp_table: opp-table2 {
> + compatible = "operating-points-v2";
> +
> + opp-200000000 {
> + opp-hz = /bits/ 64 <200000000>;
> + opp-microvolt = <825000>;
> + };
> + opp-300000000 {
> + opp-hz = /bits/ 64 <300000000>;
> + opp-microvolt = <825000>;
> + };
> + opp-400000000 {
> + opp-hz = /bits/ 64 <400000000>;
> + opp-microvolt = <825000>;
> + };
> + opp-600000000 {
> + opp-hz = /bits/ 64 <600000000>;
> + opp-microvolt = <825000>;
> + };
> + opp-700000000 {
> + opp-hz = /bits/ 64 <700000000>;
> + opp-microvolt = <900000>;
> + };
> + opp-800000000 {
> + opp-hz = /bits/ 64 <800000000>;
> + opp-microvolt = <1000000>;
> + };
> + };
> +
> firmware {
> scmi: scmi {
> compatible = "arm,scmi-smc";
> @@ -351,6 +380,24 @@ power-domain@RK3568_PD_PIPE {
> };
> };
>
> + gpu: gpu@fde60000 {
> + compatible = "rockchip,rk3568-mali", "arm,mali-bifrost";
> + reg = <0x0 0xfde60000 0x0 0x4000>;
> +
> + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "job", "mmu", "gpu";
> +
> + clocks = <&scmi_clk 1>, <&cru CLK_GPU>;
> + clock-names = "clk_mali", "bus";
> + operating-points-v2 = <&gpu_opp_table>;
> +
> + #cooling-cells = <2>;
> + power-domains = <&power RK3568_PD_GPU>;
> + status = "disabled";
> + };
> +
> sdmmc2: mmc@fe000000 {
> compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
> reg = <0x0 0xfe000000 0x0 0x4000>;
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
prev parent reply other threads:[~2021-07-29 10:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-19 22:49 [PATCH 1/2] arm64: dts: rockchip: add GPU node for rk3568 Ezequiel Garcia
2021-07-29 10:08 ` Heiko Stübner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2147216.TLkxdtWsSY@diego \
--to=heiko@sntech.de \
--cc=ezequiel@collabora.com \
--cc=kever.yang@rock-chips.com \
--cc=linux-rockchip@lists.infradead.org \
--cc=pgwipeout@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox