Re: [PATCH v5 20/20] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board

[Damon Ding <damon.ding@rock-chips.com>]

Hi Andy,

On 2025/1/11 18:28, Andy Yan wrote:
> 
> Hi Damon,
> 
> At 2025-01-09 11:27:25, "Damon Ding" <damon.ding@rock-chips.com> wrote:
>> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
>> - Set pinctrl of pwm12 for backlight
>> - Enable edp0/hdptxphy0/vp2
>> - Add aux-bus/panel nodes
>>
>> Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
>>
>> ---
>>
>> Changes in v2:
>> - Remove brightness-levels and default-brightness-level properties in
>>   backlight node.
>> - Add the detail DT changes to commit message.
>>
>> Changes in v3:
>> - Use aux-bus instead of platform bus for edp-panel.
>>
>> Changes in v4:
>> - Add comments related to the use of panel compatible "lg,lp079qx1-sp0v"
>>   in the commit message.
>>
>> Changes in v5:
>> - Use "edp-panel" instead of "lg,lp079qx1-sp0v"
>> - Remove unnecessary comments in commit message
>> - Assign the parent of DCLK_VOP2_SRC to PLL_V0PLL
>> ---
>> .../boot/dts/rockchip/rk3588s-evb1-v10.dts    | 54 +++++++++++++++++++
>> 1 file changed, 54 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>> index bc4077575beb..a8c151b41e21 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>> @@ -9,6 +9,7 @@
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/input/input.h>
>> #include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/soc/rockchip,vop2.h>
>> #include <dt-bindings/usb/pd.h>
>> #include "rk3588s.dtsi"
>>
>> @@ -238,6 +239,41 @@ &combphy2_psu {
>> 	status = "okay";
>> };
>>
>> +&edp0 {
>> +	force-hpd;
>> +	status = "okay";
>> +
>> +	aux-bus {
>> +		panel {
>> +			compatible = "edp-panel";
>> +			backlight = <&backlight>;
>> +			power-supply = <&vcc3v3_lcd_edp>;
>> +
>> +			port {
>> +				panel_in_edp: endpoint {
>> +					remote-endpoint = <&edp_out_panel>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +};
>> +
>> +&edp0_in {
>> +	edp0_in_vp2: endpoint {
>> +		remote-endpoint = <&vp2_out_edp0>;
>> +	};
>> +};
>> +
>> +&edp0_out {
>> +	edp_out_panel: endpoint {
>> +		remote-endpoint = <&panel_in_edp>;
>> +	};
>> +};
>> +
>> +&hdptxphy0 {
>> +	status = "okay";
>> +};
>> +
>> &i2c3 {
>> 	status = "okay";
>>
>> @@ -399,6 +435,7 @@ usbc0_int: usbc0-int {
>> };
>>
>> &pwm12 {
>> +	pinctrl-0 = <&pwm12m1_pins>;
>> 	status = "okay";
>> };
>>
>> @@ -1168,3 +1205,20 @@ usbdp_phy0_dp_altmode_mux: endpoint@1 {
>> 		};
>> 	};
>> };
>> +
>> +&vop_mmu {
>> +	status = "okay";
>> +};
>> +
>> +&vop {
>> +	assigned-clocks = <&cru DCLK_VOP2_SRC>;
>> +	assigned-clock-parents = <&cru PLL_V0PLL>;
> 
> It's necessary to explain why we need to  assign V0PLL for DCLK_VOP2_SRC in commit message.
> 
> 

I will add relevant explainations in next version.

>> +	status = "okay";
>> +};
>> +
>> +&vp2 {
>> +	vp2_out_edp0: endpoint@ROCKCHIP_VOP2_EP_EDP0 {
>> +		reg = <ROCKCHIP_VOP2_EP_EDP0>;
>> +		remote-endpoint = <&edp0_in_vp2>;
>> +	};
>> +};
>> -- 
>> 2.34.1
>>

Best regards,
Damon


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip