From: "Andy Yan" <andyshrk@163.com>
To: "Detlev Casanova" <detlev.casanova@collabora.com>
Cc: heiko@sntech.de, hjc@rock-chips.com, krzk+dt@kernel.org,
s.hauer@pengutronix.de, devicetree@vger.kernel.org,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
linux-rockchip@lists.infradead.org, derek.foreman@collabora.com,
"Andy Yan" <andy.yan@rock-chips.com>,
kernel@collabora.com
Subject: Re:Re: [PATCH v5 05/18] drm/rockchip: vop2: Set AXI id for rk3588
Date: Wed, 11 Dec 2024 14:34:34 +0800 (CST) [thread overview]
Message-ID: <2d381563.5e54.193b46d2f30.Coremail.andyshrk@163.com> (raw)
In-Reply-To: <5839604.DvuYhMxLoT@trenzalore>
Hi Detlev,
At 2024-12-11 02:40:14, "Detlev Casanova" <detlev.casanova@collabora.com> wrote:
>Hi Andy,
>
>On Monday, 9 December 2024 07:29:18 EST Andy Yan wrote:
>> From: Andy Yan <andy.yan@rock-chips.com>
>>
>> There are two AXI bus in vop2, windows attached on the same bus must
>> have a unique channel YUV and RGB channel ID.
>>
>> The default IDs will conflict with each other on the rk3588, so they
>> need to be reassigned.
>>
>> Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
>> Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
>> Tested-by: Derek Foreman <derek.foreman@collabora.com>
>>
>> ---
>>
>> Changes in v5:
>> - Added in V5
>>
>> drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 14 +++++++++++
>> drivers/gpu/drm/rockchip/rockchip_drm_vop2.h | 9 +++++++
>> drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 26 +++++++++++++++++++-
>> 3 files changed, 48 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c index
>> dc4edd65bc9e..8b9ca046eeeb 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>> @@ -1426,6 +1426,12 @@ static void vop2_plane_atomic_update(struct drm_plane
>> *plane, &fb->format->format,
>> afbc_en ? "AFBC" : "", &yrgb_mst);
>>
>> + if (vop2->data->soc_id > 3568) {
>
>Shouldn't this be done only for rk3588, as specified in the comments below ?
>The test we did before showed that it is failing on rk3576 and 3576 is > 3588.
I think this is because you tested before with the patch I gave Derek without axi id
assigned for rk3576.
I assigned axi id for rk3576 in this version 18/18(The new ID assignment can adapt to more application scenarios.),
can you test it with the whole V5 version again?
>
>I suggest
>
> if (vop2->data->soc_id == 3588) {
>
>Regards,
>Detlev
>
>> + vop2_win_write(win, VOP2_WIN_AXI_BUS_ID, win->data-
>>axi_bus_id);
>> + vop2_win_write(win, VOP2_WIN_AXI_YRGB_R_ID, win->data-
>>axi_yrgb_r_id);
>> + vop2_win_write(win, VOP2_WIN_AXI_UV_R_ID, win->data-
>>axi_uv_r_id);
>> + }
>> +
>> if (vop2_cluster_window(win))
>> vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN,
>half_block_en);
>>
>> @@ -3354,6 +3360,10 @@ static struct reg_field
>> vop2_cluster_regs[VOP2_WIN_MAX_REG] = { [VOP2_WIN_Y2R_EN] =
>> REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 8, 8),
>> [VOP2_WIN_R2Y_EN] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 9, 9),
>> [VOP2_WIN_CSC_MODE] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL0, 10, 11),
>> + [VOP2_WIN_AXI_YRGB_R_ID] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL2, 0,
>3),
>> + [VOP2_WIN_AXI_UV_R_ID] = REG_FIELD(RK3568_CLUSTER_WIN_CTRL2, 5, 8),
>> + /* RK3588 only, reserved bit on rk3568*/
>> + [VOP2_WIN_AXI_BUS_ID] = REG_FIELD(RK3568_CLUSTER_CTRL, 13, 13),
>>
>> /* Scale */
>> [VOP2_WIN_SCALE_YRGB_X] =
>REG_FIELD(RK3568_CLUSTER_WIN_SCL_FACTOR_YRGB, 0,
>> 15), @@ -3446,6 +3456,10 @@ static struct reg_field
>> vop2_esmart_regs[VOP2_WIN_MAX_REG] = { [VOP2_WIN_YMIRROR] =
>> REG_FIELD(RK3568_SMART_CTRL1, 31, 31),
>> [VOP2_WIN_COLOR_KEY] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL, 0,
>29),
>> [VOP2_WIN_COLOR_KEY_EN] = REG_FIELD(RK3568_SMART_COLOR_KEY_CTRL,
>31, 31),
>> + [VOP2_WIN_AXI_YRGB_R_ID] = REG_FIELD(RK3568_SMART_CTRL1, 4, 8),
>> + [VOP2_WIN_AXI_UV_R_ID] = REG_FIELD(RK3568_SMART_CTRL1, 12, 16),
>> + /* RK3588 only, reserved register on rk3568 */
>> + [VOP2_WIN_AXI_BUS_ID] = REG_FIELD(RK3588_SMART_AXI_CTRL, 1, 1),
>>
>> /* Scale */
>> [VOP2_WIN_SCALE_YRGB_X] =
>REG_FIELD(RK3568_SMART_REGION0_SCL_FACTOR_YRGB,
>> 0, 15), diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h index
>> 8786c2ba48df..0a3b22e8d14e 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.h
>> @@ -78,6 +78,9 @@ enum vop2_win_regs {
>> VOP2_WIN_COLOR_KEY,
>> VOP2_WIN_COLOR_KEY_EN,
>> VOP2_WIN_DITHER_UP,
>> + VOP2_WIN_AXI_BUS_ID,
>> + VOP2_WIN_AXI_YRGB_R_ID,
>> + VOP2_WIN_AXI_UV_R_ID,
>>
>> /* scale regs */
>> VOP2_WIN_SCALE_YRGB_X,
>> @@ -149,6 +152,10 @@ struct vop2_win_data {
>> unsigned int layer_sel_id;
>> uint64_t feature;
>>
>> + uint8_t axi_bus_id;
>> + uint8_t axi_yrgb_r_id;
>> + uint8_t axi_uv_r_id;
>> +
>> unsigned int max_upscale_factor;
>> unsigned int max_downscale_factor;
>> const u8 dly[VOP2_DLY_MODE_MAX];
>> @@ -319,6 +326,7 @@ enum dst_factor_mode {
>>
>> #define RK3568_CLUSTER_WIN_CTRL0 0x00
>> #define RK3568_CLUSTER_WIN_CTRL1 0x04
>> +#define RK3568_CLUSTER_WIN_CTRL2 0x08
>> #define RK3568_CLUSTER_WIN_YRGB_MST 0x10
>> #define RK3568_CLUSTER_WIN_CBR_MST 0x14
>> #define RK3568_CLUSTER_WIN_VIR 0x18
>> @@ -341,6 +349,7 @@ enum dst_factor_mode {
>> /* (E)smart register definition, offset relative to window base */
>> #define RK3568_SMART_CTRL0 0x00
>> #define RK3568_SMART_CTRL1 0x04
>> +#define RK3588_SMART_AXI_CTRL 0x08
>> #define RK3568_SMART_REGION0_CTRL 0x10
>> #define RK3568_SMART_REGION0_YRGB_MST 0x14
>> #define RK3568_SMART_REGION0_CBR_MST 0x18
>> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c index
>> f7d3350594fa..37c65138012d 100644
>> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
>> @@ -395,7 +395,7 @@ static const struct vop2_video_port_data
>> rk3588_vop_video_ports[] = { * AXI1 is a read only bus.
>> *
>> * Every window on a AXI bus must assigned two unique
>> - * read id(yrgb_id/uv_id, valid id are 0x1~0xe).
>> + * read id(yrgb_r_id/uv_r_id, valid id are 0x1~0xe).
>> *
>> * AXI0:
>> * Cluster0/1, Esmart0/1, WriteBack
>> @@ -415,6 +415,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .layer_sel_id = 0,
>> .supported_rotations = DRM_MODE_ROTATE_90 |
>DRM_MODE_ROTATE_270 |
>> DRM_MODE_REFLECT_X |
>DRM_MODE_REFLECT_Y,
>> + .axi_bus_id = 0,
>> + .axi_yrgb_r_id = 2,
>> + .axi_uv_r_id = 3,
>> .max_upscale_factor = 4,
>> .max_downscale_factor = 4,
>> .dly = { 4, 26, 29 },
>> @@ -431,6 +434,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> .type = DRM_PLANE_TYPE_PRIMARY,
>> + .axi_bus_id = 0,
>> + .axi_yrgb_r_id = 6,
>> + .axi_uv_r_id = 7,
>> .max_upscale_factor = 4,
>> .max_downscale_factor = 4,
>> .dly = { 4, 26, 29 },
>> @@ -446,6 +452,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> .type = DRM_PLANE_TYPE_PRIMARY,
>> + .axi_bus_id = 1,
>> + .axi_yrgb_r_id = 2,
>> + .axi_uv_r_id = 3,
>> .max_upscale_factor = 4,
>> .max_downscale_factor = 4,
>> .dly = { 4, 26, 29 },
>> @@ -461,6 +470,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .supported_rotations = DRM_MODE_ROTATE_90 | DRM_MODE_ROTATE_270 |
>> DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y,
>> .type = DRM_PLANE_TYPE_PRIMARY,
>> + .axi_bus_id = 1,
>> + .axi_yrgb_r_id = 6,
>> + .axi_uv_r_id = 7,
>> .max_upscale_factor = 4,
>> .max_downscale_factor = 4,
>> .dly = { 4, 26, 29 },
>> @@ -475,6 +487,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .layer_sel_id = 2,
>> .supported_rotations = DRM_MODE_REFLECT_Y,
>> .type = DRM_PLANE_TYPE_OVERLAY,
>> + .axi_bus_id = 0,
>> + .axi_yrgb_r_id = 0x0a,
>> + .axi_uv_r_id = 0x0b,
>> .max_upscale_factor = 8,
>> .max_downscale_factor = 8,
>> .dly = { 23, 45, 48 },
>> @@ -488,6 +503,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .layer_sel_id = 3,
>> .supported_rotations = DRM_MODE_REFLECT_Y,
>> .type = DRM_PLANE_TYPE_OVERLAY,
>> + .axi_bus_id = 0,
>> + .axi_yrgb_r_id = 0x0c,
>> + .axi_uv_r_id = 0x01,
>> .max_upscale_factor = 8,
>> .max_downscale_factor = 8,
>> .dly = { 23, 45, 48 },
>> @@ -501,6 +519,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .layer_sel_id = 6,
>> .supported_rotations = DRM_MODE_REFLECT_Y,
>> .type = DRM_PLANE_TYPE_OVERLAY,
>> + .axi_bus_id = 1,
>> + .axi_yrgb_r_id = 0x0a,
>> + .axi_uv_r_id = 0x0b,
>> .max_upscale_factor = 8,
>> .max_downscale_factor = 8,
>> .dly = { 23, 45, 48 },
>> @@ -514,6 +535,9 @@ static const struct vop2_win_data rk3588_vop_win_data[]
>> = { .layer_sel_id = 7,
>> .supported_rotations = DRM_MODE_REFLECT_Y,
>> .type = DRM_PLANE_TYPE_OVERLAY,
>> + .axi_bus_id = 1,
>> + .axi_yrgb_r_id = 0x0c,
>> + .axi_uv_r_id = 0x0d,
>> .max_upscale_factor = 8,
>> .max_downscale_factor = 8,
>> .dly = { 23, 45, 48 },
>
>
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2024-12-11 6:36 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-09 12:29 [PATCH v5 00/18] VOP Support for rk3576 Andy Yan
2024-12-09 12:29 ` [PATCH] arm64: dts: rockchip: Add vop " Andy Yan
2024-12-09 12:36 ` Andy Yan
2024-12-09 12:29 ` [PATCH] arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook Andy Yan
2024-12-09 12:37 ` Andy Yan
2024-12-09 12:29 ` [PATCH v5 01/18] drm/rockchip: vop2: Add debugfs support Andy Yan
2024-12-10 11:57 ` Heiko Stübner
2024-12-11 7:07 ` Andy Yan
2024-12-11 8:52 ` Heiko Stübner
2024-12-09 12:29 ` [PATCH] drm/rockchip: vop2: Setup delay cycle for Esmart2/3 Andy Yan
2024-12-09 12:37 ` Andy Yan
2024-12-09 12:29 ` [PATCH v5 02/18] drm/rockchip: vop2: Fix cluster windows alpha ctrl regsiters offset Andy Yan
2024-12-09 12:29 ` [PATCH v5 03/18] drm/rockchip: vop2: Fix the mixer alpha setup for layer 0 Andy Yan
2024-12-09 12:29 ` [PATCH v5 04/18] drm/rockchip: vop2: Fix the windows switch between different layers Andy Yan
2024-12-10 23:09 ` Heiko Stuebner
2024-12-09 12:29 ` [PATCH v5 05/18] drm/rockchip: vop2: Set AXI id for rk3588 Andy Yan
2024-12-10 18:40 ` Detlev Casanova
2024-12-11 6:34 ` Andy Yan [this message]
2024-12-11 15:45 ` Detlev Casanova
2024-12-12 7:52 ` Andy Yan
2024-12-13 18:34 ` Detlev Casanova
2024-12-14 8:01 ` Andy Yan
2024-12-09 12:29 ` [PATCH v5 06/18] drm/rockchip: vop2: Setup delay cycle for Esmart2/3 Andy Yan
2024-12-09 12:29 ` [PATCH v5 07/18] drm/rockchip: vop2: Check linear format for Cluster windows on rk3566/8 Andy Yan
2024-12-09 12:32 ` [PATCH v5 08/18] drm/rockchip: vop2: Add check for 32 bpp format Andy Yan
2024-12-09 17:06 ` Daniel Stone
2024-12-10 7:01 ` Andy Yan
2024-12-09 12:32 ` [PATCH v5 09/18] drm/rockchip: vop2: include rockchip_drm_drv.h Andy Yan
2024-12-09 12:32 ` [PATCH v5 10/18] drm/rockchip: vop2: Support 32x8 superblock afbc Andy Yan
2024-12-09 12:33 ` [PATCH v5 11/18] drm/rockchip: vop2: Add platform specific callback Andy Yan
2024-12-09 12:33 ` [PATCH v5 12/18] drm/rockchip: vop2: Support for different layer select configuration between VPs Andy Yan
2024-12-09 12:33 ` [PATCH v5 13/18] drm/rockchip: vop2: Introduce vop hardware version Andy Yan
2024-12-10 15:03 ` Heiko Stübner
2024-12-09 12:33 ` [PATCH v5 14/18] drm/rockchip: vop2: Register the primary plane and overlay plane separately Andy Yan
2024-12-09 12:33 ` [PATCH v5 15/18] drm/rockchip: vop2: Set plane possible crtcs by possible vp mask Andy Yan
2024-12-09 12:34 ` [PATCH v5 16/18] drm/rockchip: vop2: Add uv swap for cluster window Andy Yan
2024-12-09 12:34 ` [PATCH v5 17/18] dt-bindings: display: vop2: Add rk3576 support Andy Yan
2024-12-09 12:34 ` [PATCH v5 18/18] drm/rockchip: vop2: Add support for rk3576 Andy Yan
2024-12-10 23:12 ` (subset) [PATCH v5 00/18] VOP Support " Heiko Stuebner
2024-12-14 8:15 ` [PATCH v6 00/16] " Andy Yan
2024-12-14 8:15 ` [PATCH v6 01/16] drm/rockchip: vop2: Add debugfs support Andy Yan
2024-12-14 8:15 ` [PATCH v6 02/16] drm/rockchip: vop2: Fix the windows switch between different layers Andy Yan
2024-12-14 8:15 ` [PATCH v6 03/16] drm/rockchip: vop2: Set AXI id for rk3588 Andy Yan
2024-12-14 8:15 ` [PATCH v6 04/16] drm/rockchip: vop2: Setup delay cycle for Esmart2/3 Andy Yan
2024-12-14 8:15 ` [PATCH v6 05/16] drm/rockchip: vop2: Check linear format for Cluster windows on rk3566/8 Andy Yan
2024-12-14 8:15 ` [PATCH v6 06/16] drm/rockchip: vop2: Add check for 32 bpp format for rk3588 Andy Yan
2024-12-14 8:15 ` [PATCH v6 07/16] drm/rockchip: vop2: include rockchip_drm_drv.h Andy Yan
2024-12-14 8:15 ` [PATCH v6 08/16] drm/rockchip: vop2: Support 32x8 superblock afbc Andy Yan
2024-12-14 8:15 ` [PATCH v6 09/16] drm/rockchip: vop2: Add platform specific callback Andy Yan
2024-12-14 8:15 ` [PATCH v6 10/16] drm/rockchip: vop2: Support for different layer select configuration between VPs Andy Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2d381563.5e54.193b46d2f30.Coremail.andyshrk@163.com \
--to=andyshrk@163.com \
--cc=andy.yan@rock-chips.com \
--cc=derek.foreman@collabora.com \
--cc=detlev.casanova@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=kernel@collabora.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox