Re: [PATCH v2] arm64: dts: rockchip: sapphire: add chosen node

[Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>]

Am Dienstag, 30. Oktober 2018, 15:59:41 CET schrieb Vicente Bergas:
> In order to use earlycon, the stdout-path property needs to be set in the chosen node.
> 
> ---
> 
> Hi Heiko,
> 
> > shouldn't that maybe live in the shared .dtsi instead?
> this v2 applies the change in the .dtsi as suggested.
> 
> > I do guess the excavator will have the same default serial?
> Well, in fact it seems to me that serial2 is set as the default serial port
> at the chip level, although there are some exceptions. But on the other hand
> the baud rate is more free form.
> So, as suggested, it could be a good compromise to put it at the
> daugther-card level.
> 
> The point for working around the kexec bug is still valid, but with
> the update from the maintainer it is not enough to fix everything:
> http://lists.infradead.org/pipermail/kexec/2018-October/021762.html
> 
> Regards,
>   Vicenç.
> 
> Signed-off-by: Vicente Bergas <vicencb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

applied for 4.21

Thanks
Heiko