public inbox for linux-rockchip@lists.infradead.org
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: linux-rockchip@lists.infradead.org, Shawn Lin <shawn.lin@rock-chips.com>
Cc: shawn.lin@rock-chips.com, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] arm64: dts: rockchip: Add domain-supply for pd_rkvdec0/1 and pd_venc0/1
Date: Sun, 22 Feb 2026 14:15:28 +0100	[thread overview]
Message-ID: <3596120.QJadu78ljV@phil> (raw)
In-Reply-To: <1849787.VLH7GnMWUR@phil>

Am Sonntag, 22. Februar 2026, 14:11:26 Mitteleuropäische Normalzeit schrieb Heiko Stuebner:
> Hi Shawn,
> 
> Am Freitag, 13. Februar 2026, 03:42:07 Mitteleuropäische Normalzeit schrieb Shawn Lin:
> > 在 2026/02/13 星期五 10:35, Shawn Lin 写道:
> > > The power domains pd_rkvdec0/1 and pd_venc0/1 depend on two voltage supplies,
> > > vdd_vdenc_s0 and vdd_vdenc_mem_s0. These supplies might be missing or cause probe
> > > deferral. Since the Rockchip power domain management code currently supports managing
> > > only one power supply, and both supplies belong to the same PMIC (making it highly
> > > unlikely for one to be available while the other is not), a practical solution is
> > > implemented.
> > > 
> > > Both supplies are configured with the boot-on and always-on properties. Only one
> > > of them is assigned as the domain-supply for pd_rkvdec0/1 and pd_venc0/1. This allows
> > > the power domain code to perform a nominal enable operation on this single supply,
> > > thereby successfully acquiring a reference to both supplies (as they are from the same
> > > PMIC). The system then relies on their boot-on and always-on flags to maintain the
> > > correct state.
> > > 
> > > Crucially, this approach handles cases like probe deferral correctly:
> > > if the PMIC is not yet ready, enabling the power domain will be deferred until the
> > > necessary supplies become available.
> 
> just as a question, does the board have problems without these supplies?
> Aka, is this a fix for a problem, or "just" future proofing the board?

Ah, I take everything back. The pmdomain patch in
   https://lore.kernel.org/r/1770891364-52147-1-git-send-email-shawn.lin@rock-chips.com
is the actual fix.

With that patch applied all board should work correctly by deferring
the vdec probe until each board adds its domain-supply.

To not cause too much disturbance, this then counts as feature :-)

Heiko



> > > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> > > ---
> > > 
> > >   arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts  | 16 ++++++++++++++++
> > >   arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts | 17 +++++++++++++++++
> > >   2 files changed, 33 insertions(+)
> > > 
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> > > index c9d284c..09bc7b6 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> > > @@ -568,6 +568,22 @@
> > >   	domain-supply = <&vdd_gpu_s0>;
> > >   };
> > >   
> > > +&pd_rkvdec0 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > > +&pd_rkvdec1 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > > +&pd_venc0 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > > +&pd_venc1 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > >   &pinctrl {
> > >   	audio {
> > >   		hp_detect: headphone-detect {
> > > diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> > > index f820505..25d80b6 100644
> > > --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> > > +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> > > @@ -381,6 +381,22 @@
> > >   	domain-supply = <&vdd_gpu_s0>;
> > >   };
> > >   
> > > +&pd_rkvdec0 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > > +&pd_rkvdec1 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > > +&pd_venc0 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > > +&pd_venc1 {
> > > +	domain-supply = <&vdd_vdenc_s0>;
> > > +};
> > > +
> > >   &pinctrl {
> > >   	audio {
> > >   		hp_detect: headphone-detect {
> > > @@ -580,6 +596,7 @@
> > >   			vdd_gpu_mem_s0: dcdc-reg5 {
> > >   				regulator-name = "vdd_gpu_mem_s0";
> > >   				regulator-boot-on;
> > > +				regulator-always-on;
> > 
> > Oops, I sent the wrong version. Should remove the this line change.
> > Will fix it if v2 needed.
> > 
> > >   				regulator-min-microvolt = <675000>;
> > >   				regulator-max-microvolt = <950000>;
> > >   				regulator-ramp-delay = <12500>;
> > > 
> > 
> 
> 





_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

  reply	other threads:[~2026-02-22 13:15 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-13  2:35 [PATCH 1/2] arm64: dts: rockchip: add node name for RK3588_PD_RKVDEC0/1 and RK3588_PD_VENC0/1 Shawn Lin
2026-02-13  2:35 ` [PATCH 2/2] arm64: dts: rockchip: Add domain-supply for pd_rkvdec0/1 and pd_venc0/1 Shawn Lin
2026-02-13  2:42   ` Shawn Lin
2026-02-22 13:11     ` Heiko Stuebner
2026-02-22 13:15       ` Heiko Stuebner [this message]
2026-02-13 10:32 ` [PATCH 1/2] arm64: dts: rockchip: add node name for RK3588_PD_RKVDEC0/1 and RK3588_PD_VENC0/1 Chaoyi Chen
2026-02-13 11:11   ` Shawn Lin
2026-02-24  1:42     ` Chaoyi Chen
2026-02-24  3:14       ` Shawn Lin
2026-02-24  8:51         ` Chaoyi Chen
2026-02-22 22:39 ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3596120.QJadu78ljV@phil \
    --to=heiko@sntech.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=shawn.lin@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox