From: Pei Xiao <xiaopei01@kylinos.cn>
To: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>,
linux-rockchip@lists.infradead.org, linux-sound@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] ASOC: rockchip: Use helper function devm_clk_get_enabled()
Date: Fri, 6 Jun 2025 11:27:13 +0800 [thread overview]
Message-ID: <3f589ddf-e421-494f-85e5-1adebd19d03a@kylinos.cn> (raw)
In-Reply-To: <24654754.ouqheUzb2q@workhorse>
在 2025/6/5 01:42, Nicolas Frattaroli 写道:
> On Wednesday, 4 June 2025 05:13:30 Central European Summer Time Pei Xiao wrote:
>> Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
>> and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
>> replaced by devm_clk_get_enabled() when driver enables the clocks for the
>> whole lifetime of the device. Moreover, it is no longer necessary to
>> unprepare and disable the clocks explicitly.
>>
>> Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
>> ---
>> sound/soc/rockchip/rockchip_sai.c | 8 +-------
>> 1 file changed, 1 insertion(+), 7 deletions(-)
>>
>> diff --git a/sound/soc/rockchip/rockchip_sai.c b/sound/soc/rockchip/rockchip_sai.c
>> index 79b04770da1c..2ec675708681 100644
>> --- a/sound/soc/rockchip/rockchip_sai.c
>> +++ b/sound/soc/rockchip/rockchip_sai.c
>> @@ -1448,16 +1448,12 @@ static int rockchip_sai_probe(struct platform_device *pdev)
>> "Failed to get mclk\n");
>> }
>>
>> - sai->hclk = devm_clk_get(&pdev->dev, "hclk");
>> + sai->hclk = devm_clk_get_enabled(&pdev->dev, "hclk");
>> if (IS_ERR(sai->hclk)) {
>> return dev_err_probe(&pdev->dev, PTR_ERR(sai->hclk),
>> "Failed to get hclk\n");
>> }
>>
>> - ret = clk_prepare_enable(sai->hclk);
>> - if (ret)
>> - return dev_err_probe(&pdev->dev, ret, "Failed to enable hclk\n");
>> -
>> regmap_read(sai->regmap, SAI_VERSION, &sai->version);
>>
>> ret = rockchip_sai_init_dai(sai, res, &dai);
>> @@ -1512,8 +1508,6 @@ static int rockchip_sai_probe(struct platform_device *pdev)
>> if (pm_runtime_put(&pdev->dev))
>> rockchip_sai_runtime_suspend(&pdev->dev);
>> err_disable_hclk:
>> - clk_disable_unprepare(sai->hclk);
>> -
>> return ret;
>> }
>>
>>
> Please get rid of the err_disable_hclk label, and change the
>
> goto err_disable_hclk;
>
> in the resume failure condition to a
>
> return ret;
May I ask, could we use the dev_err_probe function instead?
return dev_err_probe(&pdev->dev, ret, "Failed to initialize DAI\n");
@@ -1441,28 +1441,22 @@ static int rockchip_sai_probe(struct platform_device *pdev)
"Failed to get mclk\n");
}
- sai->hclk = devm_clk_get(&pdev->dev, "hclk");
+ sai->hclk = devm_clk_get_enabled(&pdev->dev, "hclk");
if (IS_ERR(sai->hclk)) {
return dev_err_probe(&pdev->dev, PTR_ERR(sai->hclk),
"Failed to get hclk\n");
}
- ret = clk_prepare_enable(sai->hclk);
- if (ret)
- return dev_err_probe(&pdev->dev, ret, "Failed to enable hclk\n");
-
regmap_read(sai->regmap, SAI_VERSION, &sai->version);
ret = rockchip_sai_init_dai(sai, res, &dai);
if (ret) {
- dev_err(&pdev->dev, "Failed to initialize DAI: %d\n", ret);
- goto err_disable_hclk;
+ return dev_err_probe(&pdev->dev, ret, "Failed to initialize DAI\n");
}
ret = rockchip_sai_parse_paths(sai, node);
if (ret) {
- dev_err(&pdev->dev, "Failed to parse paths: %d\n", ret);
- goto err_disable_hclk;
+ return dev_err_probe(&pdev->dev, ret, "Failed to parse paths\n");
}
/*
@@ -1475,8 +1469,7 @@ static int rockchip_sai_probe(struct platform_device *pdev)
pm_runtime_get_noresume(&pdev->dev);
ret = rockchip_sai_runtime_resume(&pdev->dev);
if (ret) {
- dev_err(&pdev->dev, "Failed to resume device: %pe\n", ERR_PTR(ret));
- goto err_disable_hclk;
+ return dev_err_probe(&pdev->dev, ret, "Failed to resume device\n");
}
ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
@@ -1504,8 +1497,6 @@ static int rockchip_sai_probe(struct platform_device *pdev)
/* If we're !CONFIG_PM, we get -ENOSYS and disable manually */
if (pm_runtime_put(&pdev->dev))
rockchip_sai_runtime_suspend(&pdev->dev);
-err_disable_hclk:
- clk_disable_unprepare(sai->hclk);
return ret;
}
thanks!
Pei.
> Other than that, patch tested to be working fine.
>
> Kind regards,
> Nicolas Frattaroli
>
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2025-06-06 3:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-06-04 3:13 [PATCH 0/2] Cleanup in rockchip_sai.c Pei Xiao
2025-06-04 3:13 ` [PATCH 1/2] ASOC: rochchip: Simplify the condition logic in rockchip_sai_xfer_stop Pei Xiao
2025-06-04 17:23 ` Nicolas Frattaroli
2025-06-05 1:57 ` Pei Xiao
2025-06-05 14:30 ` Nicolas Frattaroli
2025-06-04 3:13 ` [PATCH 2/2] ASOC: rockchip: Use helper function devm_clk_get_enabled() Pei Xiao
2025-06-04 17:42 ` Nicolas Frattaroli
2025-06-05 2:00 ` Pei Xiao
2025-06-06 3:27 ` Pei Xiao [this message]
2025-06-06 8:26 ` Nicolas Frattaroli
2025-06-04 17:48 ` [PATCH 0/2] Cleanup in rockchip_sai.c Nicolas Frattaroli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3f589ddf-e421-494f-85e5-1adebd19d03a@kylinos.cn \
--to=xiaopei01@kylinos.cn \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-sound@vger.kernel.org \
--cc=nicolas.frattaroli@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox