From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kever Yang Subject: Re: [PATCH v2 1/6] arm64: dts: rk3399-puma: Move u-boot properties into -u-boot.dtsi Date: Tue, 28 Apr 2020 22:12:07 +0800 Message-ID: <3fecdd07-cebf-89cc-d2d5-ecc7df403190@rock-chips.com> References: <20200428100019.19155-1-jagan@amarulasolutions.com> <20200428100019.19155-2-jagan@amarulasolutions.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Return-path: In-Reply-To: <20200428100019.19155-2-jagan@amarulasolutions.com> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" To: Jagan Teki , Simon Glass , Philipp Tomsich Cc: sunil@amarulasolutions.com, u-boot@lists.denx.de, linux-rockchip@lists.infradead.org, linux-amarula@amarulasolutions.com, Peter Robinson List-Id: linux-rockchip.vger.kernel.org On 2020/4/28 下午6:00, Jagan Teki wrote: > Move U-Boot specific properties into rk3399-puma u-boot > specific dtsi file. > > This would help to sync the devicetrees from Linux whenever > required instead of adding specific nodes. > > Cc: Peter Robinson > Signed-off-by: Jagan Teki Reviewed-by: Kever Yang Thanks, - Kever > --- > Changes for v2: > - none > > arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ > arch/arm/dts/rk3399-puma.dtsi | 11 ----------- > 2 files changed, 16 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi > index 52f62b5d39..e664779227 100644 > --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi > @@ -22,3 +22,19 @@ > }; > > }; > + > +&bios_enable { > + u-boot,dm-pre-reloc; > +}; > + > +&gpio1 { > + u-boot,dm-pre-reloc; > +}; > + > +&gpio3 { > + u-boot,dm-pre-reloc; > +}; > + > +&spiflash { > + u-boot,dm-pre-reloc; > +}; > diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi > index 558b6337df..246a892cb7 100644 > --- a/arch/arm/dts/rk3399-puma.dtsi > +++ b/arch/arm/dts/rk3399-puma.dtsi > @@ -91,7 +91,6 @@ > */ > bios_enable: bios_enable { > compatible = "regulator-fixed"; > - u-boot,dm-pre-reloc; > regulator-name = "bios_enable"; > enable-active-high; > gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; > @@ -520,14 +519,6 @@ > status = "okay"; > }; > > -&gpio1 { > - u-boot,dm-pre-reloc; > -}; > - > -&gpio3 { > - u-boot,dm-pre-reloc; > -}; > - > &pinctrl { > /* Pins that are not explicitely used by any devices */ > pinctrl-names = "default"; > @@ -633,8 +624,6 @@ > #size-cells = <0>; > > spiflash: w25q32dw@0 { > - u-boot,dm-pre-reloc; > - > compatible = "jedec,spi-nor"; > reg = <0>; > spi-max-frequency = <49500000>;