From: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
amstan-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org
Subject: Re: [PATCH v3 3/3] ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend
Date: Wed, 05 Aug 2015 18:51:59 +0800 [thread overview]
Message-ID: <55C1EACF.1060702@rock-chips.com> (raw)
In-Reply-To: <1544453.8uqOvAiDmD@diego>
On 08/05/2015 06:51 AM, Heiko Stübner wrote:
> PMU_GPIOINT_WAKEUP_EN seems needed when entering the shallow suspend
> (with logic staying on) but does not seem to be needed for the deep
> suspend for unknown reasons.
> Testing revealed that this setting really is necessary to reliably
> resume the veyron devices from suspend.
>
> Reported-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
> ---
> arch/arm/mach-rockchip/pm.c | 9 ++++++---
> arch/arm/mach-rockchip/pm.h | 1 +
> 2 files changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
> index c11a30b..156cd23 100644
> --- a/arch/arm/mach-rockchip/pm.c
> +++ b/arch/arm/mach-rockchip/pm.c
> @@ -123,9 +123,6 @@ static void rk3288_slp_mode_set(int level)
> regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
> rk3288_bootram_phy);
>
> - regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
> - PMU_ARMINT_WAKEUP_EN);
> -
> mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) |
> BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) |
> BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) |
> @@ -146,6 +143,9 @@ static void rk3288_slp_mode_set(int level)
> mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) |
> BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA);
>
> + regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
> + PMU_ARMINT_WAKEUP_EN);
> +
> /*
> * In deep suspend we use PMU_PMU_USE_LF to let the rk3288
> * switch its main clock supply to the alternative 32kHz
> @@ -166,6 +166,9 @@ static void rk3288_slp_mode_set(int level)
> */
> mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN);
>
> + regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1,
> + PMU_ARMINT_WAKEUP_EN | PMU_GPIOINT_WAKEUP_EN);
> +
> /* 30ms on a 24MHz clock for pmic stabilization */
> regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 24000 * 30);
>
> diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
> index 8a55ee2..b5af26f 100644
> --- a/arch/arm/mach-rockchip/pm.h
> +++ b/arch/arm/mach-rockchip/pm.h
> @@ -61,6 +61,7 @@ static inline void rockchip_suspend_init(void)
>
> /* PMU_WAKEUP_CFG1 bits */
> #define PMU_ARMINT_WAKEUP_EN BIT(0)
> +#define PMU_GPIOINT_WAKEUP_EN BIT(3)
>
> enum rk3288_pwr_mode_con {
> PMU_PWR_MODE_EN = 0,
>
Reviewed-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Tested-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
next prev parent reply other threads:[~2015-08-05 10:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-04 22:50 [PATCH v3 1/3] ARM: rockchip: rename osc_switch_to_32k variable Heiko Stübner
2015-08-04 22:51 ` [PATCH v3 2/3] ARM: rockchip: set correct stabilization thresholds in suspend Heiko Stübner
2015-08-05 10:41 ` Chris Zhong
2015-08-06 1:54 ` Doug Anderson
2015-08-04 22:51 ` [PATCH v3 3/3] ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend Heiko Stübner
2015-08-05 10:51 ` Chris Zhong [this message]
2015-08-06 1:55 ` Doug Anderson
[not found] ` <CAD=FV=W0L_0iM+15BAUfTA2ij5Ac90aVW9JZYyDhHMDNT2ZUMg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-06 11:10 ` Heiko Stübner
2015-08-05 10:36 ` [PATCH v3 1/3] ARM: rockchip: rename osc_switch_to_32k variable Chris Zhong
2015-08-05 23:45 ` Doug Anderson
2015-08-06 11:11 ` Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55C1EACF.1060702@rock-chips.com \
--to=zyw-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=amstan-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox