linux-rockchip.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: Brian Norris <briannorris@chromium.org>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	Doug Anderson <dianders@chromium.org>,
	Shawn Lin <shawn.lin@rock-chips.com>,
	Brian Norris <computersforpeace@gmail.com>
Subject: Re: [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399
Date: Fri, 13 May 2016 23:47:57 +0200	[thread overview]
Message-ID: <5607915.FAWxOoA1QB@phil> (raw)
In-Reply-To: <1463092552-60696-1-git-send-email-briannorris@chromium.org>

Am Donnerstag, 12. Mai 2016, 15:35:51 schrieb Brian Norris:
> Add description for the SDHCI v5.1 eMMC controller on rk3399. Fix it to
> 200 MHz, to support all supported timing modes.
> 
> Note that 'rockchip,rk3399-sdhci-5.1' is not documented; we presumably
> have a compliant Arasan controller, but let's have a rockchip property
> as the canonical backup/precautionary measure. Per Heiko's previous
> suggestion, let's not clutter the arasan doc with it.
> 
> Signed-off-by: Brian Norris <briannorris@chromium.org>

At least one split is necessary.
So please at least split out the simple-mfd addition into a separate patch
(I should've seen that in v1 already, but sadly didn't)

I'm undecided if the emmc-phy addition also should get its own patch, but I 
guess it can stay together with the emmc controller.

> ---
> v2:
> 
>  * improved commit message
>  * assign eMMC clock to 200 MHz
> 
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index
> 46f325a143b0..9980c2eab4e9 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -215,6 +215,19 @@
>  		status = "disabled";
>  	};
> 
> +	sdhci: sdhci@fe330000 {
> +		compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
> +		reg = <0x0 0xfe330000 0x0 0x10000>;
> +		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
> +		clock-names = "clk_xin", "clk_ahb";
> +		assigned-clocks = <&cru SCLK_EMMC>;
> +		assigned-clock-rates = <200000000>;
> +		phys = <&emmc_phy>;
> +		phy-names = "phy_arasan";
> +		status = "disabled";
> +	};
> +
>  	usb_host0_ehci: usb@fe380000 {
>  		compatible = "generic-ehci";
>  		reg = <0x0 0xfe380000 0x0 0x20000>;
> @@ -481,8 +494,18 @@
>  	};
> 
>  	grf: syscon@ff770000 {
> -		compatible = "rockchip,rk3399-grf", "syscon";
> +		compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
>  		reg = <0x0 0xff770000 0x0 0x10000>;
> +
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		emmc_phy: phy@f780 {
> +			compatible = "rockchip,rk3399-emmc-phy";
> +			reg = <0xf780 0x20>;
> +			#phy-cells = <0>;
> +			status = "disabled";
> +		};
>  	};
> 
>  	watchdog@ff840000 {

  parent reply	other threads:[~2016-05-13 21:47 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-12 22:35 [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399 Brian Norris
2016-05-12 22:35 ` [PATCH v2 2/2] ARM64: dts: rockchip: enable eMMC for rk3399 EVB Brian Norris
2016-05-13 21:49   ` Heiko Stuebner
     [not found] ` <1463092552-60696-1-git-send-email-briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-05-13  0:42   ` [PATCH v2 1/2] ARM64: dts: rockchip: add sdhci/emmc for rk3399 Shawn Lin
2016-05-13 21:42 ` Doug Anderson
2016-05-13 21:48   ` Brian Norris
2016-05-13 21:47 ` Heiko Stuebner [this message]
2016-05-13 21:57   ` Brian Norris
2016-05-13 22:14     ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5607915.FAWxOoA1QB@phil \
    --to=heiko@sntech.de \
    --cc=briannorris@chromium.org \
    --cc=computersforpeace@gmail.com \
    --cc=dianders@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=shawn.lin@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).